HI!
I'd like to connect a PLC AC1353 (IFM Electronic) to my PC but that is impossible after setting the IP adress and the SubNet-Mask , to
get access to the PLC.
Normally the name of my PLC sould appear on the menu. This was not appenning!
Please I need your help!
I added some documents explaining the location of the problem.
if computer is 192.168.1.21 then plc should be 192.168.1.22 or any other number
the communicatons should be set accordingly in the PC
do a ping to your plc and to your pc
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
HI!
I'd like to connect a PLC AC1353 (IFM Electronic) to my PC but that is impossible after setting the IP adress and the SubNet-Mask , to
get access to the PLC.
Normally the name of my PLC sould appear on the menu. This was not appenning!
Please I need your help!
I added some documents explaining the location of the problem.
Best regards!
Nice day!!
PARAMETRAGE AC1353.pdf [123.97 KiB]
if computer is 192.168.1.21 then plc should be 192.168.1.22 or any other number
the communicatons should be set accordingly in the PC
do a ping to your plc and to your pc