I'm having touble with my project, I can't program my ifm CR0452 device with Codesys V2.3. I have communication error(#0). But I don't have any trouble for communication with the Maintenance Tools (I can ping without any problem). I'm using a PCAN-USB for the communication between my laptop and the CR0452, and a power supply (10V). The parameters of communication should be ok (I know the DownloadID:127 and the baudrate(250), and the CAN Card Driver:PCAN_USB (since I use a PcanUSB)). Do you have any solution or advice to where could the problem comes from, I'm stucked.
Hello,
I'm having touble with my project, I can't program my ifm CR0452 device with Codesys V2.3. I have communication error(#0). But I don't have any trouble for communication with the Maintenance Tools (I can ping without any problem). I'm using a PCAN-USB for the communication between my laptop and the CR0452, and a power supply (10V). The parameters of communication should be ok (I know the DownloadID:127 and the baudrate(250), and the CAN Card Driver:PCAN_USB (since I use a PcanUSB)). Do you have any solution or advice to where could the problem comes from, I'm stucked.
le nom était PEAK_USB...
Last edit: rolllmex 2021-09-30
le nom était PEAK_USB...
le nom était PEAK_USB...
Last edit: rolllmex 2021-09-30
le nom était PEAK_USB...
Last edit: rolllmex 2021-09-30
Last edit: rolllmex 2021-09-30
tuve el mismo problema se soluciono cuando le cambie de ID, atravez del codigo proporcionado por IFM