On page 21 of the documentation, it is written that the library has been tested with various processors (Bechoff BX 9000, Beckhoff CX 9001-1001, Wago 750-841, etc). If I am using a CoDeSys PLC that is not listed, does it mean only that the library has not been tested on that PLC family or am I likely to run into many problems?
Thank you and kind regards!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
the list of tested hardware is simply the hardware we use in our labs for tests.
any hardware not listed should work properly as long as it complies to the IEC61131-3 standard.
since your hardware is using the Codesys 2 development system everything shopuld work easily and straight foreward
most users of OSCAT have Harware which is not listed in our manual.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
today OSCAT released the first draft of english manuals for our libraries.
the manuals can be downloaded from our homepage download section
Thank you hugo! Very much appreciated.
any help improving our english manual is very much appreciated.
pls give us all your corrections and inputs to w www.oscat.de w
can not load it error in file.
could you please have a look at it hugo.
otherwise send it direct to me at e shooter@home.nl e please.
sorry our server was down for a few hours
pls try again all is up and running again
Hugo, are you interesting in russian translation of your manual? I think I can help you...
yes we are very interested some work has already be done and with more help we could finish the job much faster
pls contact the user "asap" in the oscat forum with a private message or a post in announcements
On page 21 of the documentation, it is written that the library has been tested with various processors (Bechoff BX 9000, Beckhoff CX 9001-1001, Wago 750-841, etc). If I am using a CoDeSys PLC that is not listed, does it mean only that the library has not been tested on that PLC family or am I likely to run into many problems?
Thank you and kind regards!
the list of tested hardware is simply the hardware we use in our labs for tests.
any hardware not listed should work properly as long as it complies to the IEC61131-3 standard.
since your hardware is using the Codesys 2 development system everything shopuld work easily and straight foreward
most users of OSCAT have Harware which is not listed in our manual.