Hi guys !

I`m new here and trying to build a small project with one pulse on input wich will turn "ON" and "OFF" a lamp every time a new pulse input will come.

I will appreciate any advice or link of a existing topic like this

Thanks in advance

for this type goto w www.plcs.net w
or to your book
it is a little depending on what type of program like ST or LD you want it, and type of PLC.
go find R_TRIG block which will give one pulse when the button is pushed.
and SET to switch on your relais.

thanks; I will try it and let you know

Hi again, I have tried on wago 750-841 the tips in LD from PLCnet but not working, instead of DIFU I have put R_TRIG and so on....

Will be better tomorrow...

i am not going to tell you exact as it must be a learning curve for you.

problem solved !

Thanks