CODESYS Forge - CODESYS Forge / Talk / Codesys V2.3 🇬🇧: Communication error PC-PLC

Communication error PC-PLC

Forum: Codesys V2.3 🇬🇧

Created: 2006-06-22

Updated: 2006-06-23

Dario - 2006-06-22

Hello Developers,

I'm having a communication problem between my (pentium) laptop and an Eckelmann Motion Control (Target powerPC).

In the menu "online/communication parameters" I should set

Device: TCP/IP level 2

Address: the MC address

port: 1200

block size 128

Motorola byte order Yes

Unfortunately, "motorola byte order" text box isn't editable and the default value is set on "no"

Any suggestion?

Best regards

Dario

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

RolandWagner - 2006-06-22

Try to double click on the text box instead of inserting any text. The value should be automatically changed from 'No' to 'Yes'.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dario - 2006-06-23

Roland Wagner hat geschrieben:
Try to double click on the text box instead of inserting any text. The value should be automatically changed from 'No' to 'Yes'.

Thank you!

I've found in theCodesys Gateway Server manual a way to change that parameter using the windows registry but your way is definitely better

Best regards

Dario

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.