As subject says, I have a problem to connect on remote wago controller.
Aplication is:
I connect Wago to switch and switch to router. Controller have an IP address 192.168.1.2 and gateway 192.168.1.1
On my router I set ports:2455,502 and set DDNS with data whitch I get on w www.no-ip.com w
And then 50 km away on my computer at home in Codesys in communication parametars I choose Tcp/Ip and in address field put e.g.no-ip.com port 2455 but every time i get message communicaton error #0 logout performed!!
Now my question is do I need on my home router opet some ports? Can someone who know write in short notes what I need to do!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Is it necessary for port fowarding on remote router? If yes witch ports?
In CoDeSys V2.3 on remote site what address need to be in Gateway properties?
Do I need Codesys gateway server?
When I setting communication parametars with DDNS on local site everything work fine, so I guess
problem is on remote location!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all to forum!!
As subject says, I have a problem to connect on remote wago controller.
Aplication is:
I connect Wago to switch and switch to router. Controller have an IP address 192.168.1.2 and gateway 192.168.1.1
On my router I set ports:2455,502 and set DDNS with data whitch I get on w www.no-ip.com w
And then 50 km away on my computer at home in Codesys in communication parametars I choose Tcp/Ip and in address field put e.g.no-ip.com port 2455 but every time i get message communicaton error #0 logout performed!!
Now my question is do I need on my home router opet some ports? Can someone who know write in short notes what I need to do!
Don't you need to set the port for CodeSys as well at port 1200?
/Torbjörn
Is it necessary for port fowarding on remote router? If yes witch ports?
In CoDeSys V2.3 on remote site what address need to be in Gateway properties?
Do I need Codesys gateway server?
When I setting communication parametars with DDNS on local site everything work fine, so I guess
problem is on remote location!
bump!