when I try to open any example project from
<codesys dir="" v2.3="" install="">\Projects\Motion
I see error messages like
--
Error while reading target information
Error while loading the PLC configuration!
Description file for module 'Module.Root' not found.
--
I'm using v2.3.9.42 provided by Festo and have a full installation incl. Softmotion and SP PLCWinNT</codesys>
If I correctly remember, softmotion examples are for a realtime enabled softPLC target (not SP PLCWinNT) , but it's not included in the Festo installation package. Can I download a TSP for it from somewhere ?
Or if TSP alone is not available, where to download a 3S Codesys 2.3 installer? Can't find it on the website.
Or is there any way to use SP PLCWinNT for the examples ?
Thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
when I try to open any example project from
<codesys dir="" v2.3="" install="">\Projects\Motion
I see error messages like
--
Error while reading target information
Error while loading the PLC configuration!
Description file for module 'Module.Root' not found.
--
I'm using v2.3.9.42 provided by Festo and have a full installation incl. Softmotion and SP PLCWinNT</codesys>
If I correctly remember, softmotion examples are for a realtime enabled softPLC target (not SP PLCWinNT) , but it's not included in the Festo installation package. Can I download a TSP for it from somewhere ?
Or if TSP alone is not available, where to download a 3S Codesys 2.3 installer? Can't find it on the website.
Or is there any way to use SP PLCWinNT for the examples ?
Thanks
please ignore, I found Codesys v.2.3 installation containing a SP RTE installer on Turck site, problem solved