Im PLC/Application ist eine Application vorhanden
Application.crc 20bytes
Application.app 6,16MB
Ich habe mal mein Projekt genommen und es auf eine neue Oberfläche kopiert. Wenn da ein Fehler drinnen ist kopiere ich das natürlich auch drauf (logisch!), Es hat nichts geholfen.
Mario
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2019-07-01
Originally created by: mg
Habs gefunden. Der Retain waren nicht Ok.
Erst sudo reboot, dann sollte es gehen.
Mario
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: mg
Hallo
Ich kann das Projekt laden.
Ich kann das Bootprojekt laden.
Aber starten tut er es nie.
Wie soll ich weiter verfahren?
1562015753, 0x00000002, 4, 1288, 9, Loading bootproject <boot>Application</boot> failed
1562015753, 0x00000002, 4, 16, 40, Retain restore from file failed: [<app>Application</app>], area=1, size=<size>17752</size>, type=<type>0x0020[klzzwxh:0007Applicationklzzwxh:0008] 1562015753, 0x00000002, 4, 1288, 9, Loading bootproject <boot>Application</boot> failed
1562015753, 0x00000001, 1, 0, 34, CODESYS Control ready</type>
Im PLC/Application ist eine Application vorhanden
Application.crc 20bytes
Application.app 6,16MB
Ich habe mal mein Projekt genommen und es auf eine neue Oberfläche kopiert. Wenn da ein Fehler drinnen ist kopiere ich das natürlich auch drauf (logisch!), Es hat nichts geholfen.
Mario
Originally created by: mg
Habs gefunden. Der Retain waren nicht Ok.
Erst sudo reboot, dann sollte es gehen.
Mario