Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
If you do not add some COM gateways beneath the TCP Server, then the TCP Server accepts any unitID.
If you do add some COM gateways, then it only accepts the correct UnitID, 0xFF.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm using Codesys 3.5.18 , is it possbile to define the Uinid ID in MOdbus TCP server?
If you do not add some COM gateways beneath the TCP Server, then the TCP Server accepts any unitID.
If you do add some COM gateways, then it only accepts the correct UnitID, 0xFF.