I am new to Codesys - however I know that Codesys has J1939 library, I have one task - I want to create an alarm Panel for a generator the engine on the generator speaks J1939.The task is to display alarms (I think it is DM1 and DM2) and also some PGN parameters on the HMI , also should be able to start stop engine and also clear faults.
I am thinking to go ahead with this project with hardware that will support Programming by Codesys
How easy is it to accomplish these task in Codesys using library ?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Forum members,
I am new to Codesys - however I know that Codesys has J1939 library, I have one task - I want to create an alarm Panel for a generator the engine on the generator speaks J1939.The task is to display alarms (I think it is DM1 and DM2) and also some PGN parameters on the HMI , also should be able to start stop engine and also clear faults.
I am thinking to go ahead with this project with hardware that will support Programming by Codesys
How easy is it to accomplish these task in Codesys using library ?
Have you looked into diagnosis API for J1939? https://help.codesys.com/webapp/8LVZD-HU9xCDZg4RnKWx5CheJCc%2Ffld-Diagnosis;product=IoDrvJ1939;version=3.5.16.0
There are ready made function blocks Read_DM1 and Read_DM2.
Anyway it is not that difficult to use it.
buenas noches gracias por sus respuestas, tambien estoy pensando en realizar el mismo proyecto , quisiera que me ayuden po favor