Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
On the official Codesys store page of the BeagleBone, it says that a CAN-Cape is necessary for using CANopen. (https://store.codesys.com/en/codesys-control-for-beaglebone-sl.html). If I understood correctly, they are referring to a Comms Cape like this one (https://github.com/beagleboard/capes/tree/master/beaglebone/Comms)
I know this might sound like a stupid question, but do I need a CAN-Cape for the Raspberry Pi as well, if I want to use the CANopen Protocol? (and if yes, which Cape do I need?)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
On the official Codesys store page of the BeagleBone, it says that a CAN-Cape is necessary for using CANopen. (https://store.codesys.com/en/codesys-control-for-beaglebone-sl.html). If I understood correctly, they are referring to a Comms Cape like this one (https://github.com/beagleboard/capes/tree/master/beaglebone/Comms)
I know this might sound like a stupid question, but do I need a CAN-Cape for the Raspberry Pi as well, if I want to use the CANopen Protocol? (and if yes, which Cape do I need?)