Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I'm using the codesys runtime and I'm looking into sending MQTT Sparkplug B payloads to a broker from a WAGO PFC200 or PFC100. And noticed there is an option to select this in the Web based management, much like the WBM from wago. Was wondering if anyone has used this option before and what libraries are needed, licenses etc. If anyone has any experience to share would be apricated.
Hi,
Because you use the Codesys Runtime from the Codesys Store this will not work.
A solution for you would be the following: https://forge.codesys.com/lib/cobolt/home/Home/
A separate CODESYS IIoT libraries SL per Runtime is required.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I'm using the codesys runtime and I'm looking into sending MQTT Sparkplug B payloads to a broker from a WAGO PFC200 or PFC100. And noticed there is an option to select this in the Web based management, much like the WBM from wago. Was wondering if anyone has used this option before and what libraries are needed, licenses etc. If anyone has any experience to share would be apricated.
Thanks
Last edit: mitchellboswell 2023-05-10
Hi,
Because you use the Codesys Runtime from the Codesys Store this will not work.
A solution for you would be the following:
https://forge.codesys.com/lib/cobolt/home/Home/
A separate CODESYS IIoT libraries SL per Runtime is required.