Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am facing an issue regarding Codesys. I am working in a project where I connect a raspberry pi with a Wago Remote IO 750-352 using the "CodeSys Control for Pi SL". I could configure all the other devices but when it comes to the remote itself I get an error that I cannot find the source.
I'm getting a similar error Error IoDrvEthernetIP: Connection Failure. (16#1) when connecting to a Ethernet IP Driver (Oriental Motors AZD-AEP driver). But when expanding the error, I'm getting reasons like "Connection timeout" or "Ownership conflict"
Hello everyone,
I am facing an issue regarding Codesys. I am working in a project where I connect a raspberry pi with a Wago Remote IO 750-352 using the "CodeSys Control for Pi SL". I could configure all the other devices but when it comes to the remote itself I get an error that I cannot find the source.
Does anyone has any idea how to solve this?
press the + next to the error message, and you get a slightly more specific error message.
Thank you for the reply.
That is the more specific error message.
The size will have to match. Maybe the 750-352 can be accessed from a webbrowser, that it may tell you the correct sizes to use.
Sorry for the question, but could you tell me what are those sizes and what they mean.
In the PLC, the sizes are on the connection tab of the remote adapter.
https://content.helpme-codesys.com/en/CODESYS%20EtherNetIP/_enic_edt_target_connections.html
I am not sure about how you get the sizes from the Wago. It is either on the web interface, or you will have to find the manual for it.
Hello,
I'm getting a similar error Error IoDrvEthernetIP: Connection Failure. (16#1) when connecting to a Ethernet IP Driver (Oriental Motors AZD-AEP driver). But when expanding the error, I'm getting reasons like "Connection timeout" or "Ownership conflict"
Is this related to size as well?
harinator,
I am facing the the issue. Were you able to find the solution.
thanks,