I am using the latest CODESYS SP 19. I added one GSDML Profinet device file without problem. But, when I try to buidl the project, the compilation process ends in error with "The identifier 'min' is not a valid IEC identifier. Please change the device description."
I have tested the device description in the Profibus Profinet International's GSDML checker and the check passes without warning. So my conclusion is that the GSDML file is standard.
Attached I show the error as well as the GSDML file.
Will be very grateful for comments.
Hi:
I am using the latest CODESYS SP 19. I added one GSDML Profinet device file without problem. But, when I try to buidl the project, the compilation process ends in error with "The identifier 'min' is not a valid IEC identifier. Please change the device description."
I have tested the device description in the Profibus Profinet International's GSDML checker and the check passes without warning. So my conclusion is that the GSDML file is standard.
Attached I show the error as well as the GSDML file.
Will be very grateful for comments.
Last edit: AlfredoQuintero 2023-04-03
OK, here is the screenshot, with comments, of the error...