Recently during development of a project I attempted to create a 50 some Array of string(1000)s. This caused a memory error in which it stated "Download Failed: Not enough memory on device." I reverted my change and attempted to download with the old version of the code which compiles and would normally load to the project.
The error still became present on download. :/ I formatted the panel, changed my project to be of a smaller size, still this project would not download to the panel. Next I attempted to load the project to a panel that was exactly the same. It loaded! Same project, same settings, same type of panel!
On the panel with the memory error, I attempted to download a blank project. That compiled and loaded. Now back to the my original project, I attempted to download. Did not load with the same error.
Not sure where else to look or change settings for this one particular panel. Any ideas out there?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hallo,
you must clean your project. Sorry, I have a german Codesys only, but with the picture you can find the right place.
Then compile and downöoad your project again.
I hope, it can help you.
BR
Thomas
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Recently during development of a project I attempted to create a 50 some Array of string(1000)s. This caused a memory error in which it stated "Download Failed: Not enough memory on device." I reverted my change and attempted to download with the old version of the code which compiles and would normally load to the project.
The error still became present on download. :/ I formatted the panel, changed my project to be of a smaller size, still this project would not download to the panel. Next I attempted to load the project to a panel that was exactly the same. It loaded! Same project, same settings, same type of panel!
On the panel with the memory error, I attempted to download a blank project. That compiled and loaded. Now back to the my original project, I attempted to download. Did not load with the same error.
Not sure where else to look or change settings for this one particular panel. Any ideas out there?
Hallo,
you must clean your project. Sorry, I have a german Codesys only, but with the picture you can find the right place.
Then compile and downöoad your project again.
I hope, it can help you.
BR
Thomas