Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hello guys ,
i have rpi3 and codesys v3.5 with license of rpi3 , i also have driver w5500 connected to rpi3 over spi and i have download imager from rapberrypi.org like on picture i choose Raspberry pi OS i install raspberry pi os 32 bit , when driver w5500 is connected to my rpi3 over spi it configure automaticly , when i start project on codesys i select version 3S and now when i trying to put rpi adress ip on i have error 'no device is responding scan request' the error on capture2.Please help me to do that , i see a lot of people recommand RT kernel and idk if already installed on my rpi or not . i'm new to using raspberry pi .
Hello guys ,
i have rpi3 and codesys v3.5 with license of rpi3 , i also have driver w5500 connected to rpi3 over spi and i have download imager from rapberrypi.org like on picture i choose Raspberry pi OS i install raspberry pi os 32 bit , when driver w5500 is connected to my rpi3 over spi it configure automaticly , when i start project on codesys i select version 3S and now when i trying to put rpi adress ip on i have error 'no device is responding scan request' the error on capture2.Please help me to do that , i see a lot of people recommand RT kernel and idk if already installed on my rpi or not . i'm new to using raspberry pi .
Have you already installed the Codesys Runtime on the Pi? You can find instructions on how to do that in the help file here.
If you haven't you should also read this on preparing the Pi.