Hello,
I am a system integrator and with my company based in Australia we are looking at some good HMI supporting Codesys 3.5v and also rugged and suitable for the mobile applications.
We specialize in the mining sector and the HMI would need to be rugged IP66 at least and dust/vibration proof.
There are options on the market with screen protected up to IP69K but only on the glass while we need an high IP on the whole enclosure as this may be installed outdoor.
Trying to walk away from IFM HMI`s which are having problems when installed, both with reliability and software.
We already use Codesys on WAGO and EPEC and would like to stick to it as we like the concept and the environment which we can use on different hardware.
Not looking at buying a few units but to establish a professional relationship as we have high demand for these type of units.
We use EPEC on the 7'' and 12'' and this HMI works fantastic, but they don`t have options with smaller dimension.
If anyone has any advice or option of any HMI with 5'' dimension, that would be very much appreciated.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I am a system integrator and with my company based in Australia we are looking at some good HMI supporting Codesys 3.5v and also rugged and suitable for the mobile applications.
We specialize in the mining sector and the HMI would need to be rugged IP66 at least and dust/vibration proof.
There are options on the market with screen protected up to IP69K but only on the glass while we need an high IP on the whole enclosure as this may be installed outdoor.
Trying to walk away from IFM HMI`s which are having problems when installed, both with reliability and software.
We already use Codesys on WAGO and EPEC and would like to stick to it as we like the concept and the environment which we can use on different hardware.
Not looking at buying a few units but to establish a professional relationship as we have high demand for these type of units.
We use EPEC on the 7'' and 12'' and this HMI works fantastic, but they don`t have options with smaller dimension.
If anyone has any advice or option of any HMI with 5'' dimension, that would be very much appreciated.
maybe this one
http://www.topcon-electronics.de m
Hi,
please contact this person e akh@leaptron.com e .
He have the device for this.
regards
Hello,
You can also look for https://www.ifm.com/in/en/category/080/080_040
ifm display works on CoDeSys 3.5 platforms
Regards,
Amit Hatgine