View this messages about CoDeSys program

1) The file 'Config.ccf:' could not be sent

2) The file 'FlexConf.ini:' could not be sent

What's the problem? Its comunication error? The PLC cannot run

Thank you in advance

I have same problem.Can anybody know how to solve this problem?

I have same problem

1. I saved it as the same project but in a different location.
2. I opened this "new project".
3. I clicked on the "Direct Login from Automation Builder" button.
4. It automatically directed me to CODESYS, where I was able to create the "Create Boot Project" but first I also clicked login again but inside CODESYS keeping the automation builder login online.

Additional Information:

• The "Create Boot Project" function in CODESYS is used to create a project that will automatically start when the controller is booted up.
• To create a boot project, you must first create a new project in CODESYS.
• Once you have created a new project, you can then use the "Create Boot Project" function to create a boot application.
• The "Create Boot Project" function will create a new application that is based on the current project.
• The new application will be saved in the same location as the current project.
• You can then download the new application to the controller.