I just installed Codesys v3.5 SP18 Patch 2 on Windows 10.
I also installed the frameworks .NET as required by the installer.
When I try to create a new project I get 10 errors in the Codesys GUI.
Standard Project > Control Win V3 x64
Errors Precompile
C0046: Identifier 'DED.CAADiagDeviceDefault' not defined
C0046: Identifier 'DED.INode' not defined
C0046: Identifier 'g_itfRootINodeInst' not defined
C0046: Identifier 'IoConfigTaskMap' not defined
C0046: Identifier 'IoConfParameter' not defined
Errors Library Manager
Could not open library '#IoStandard'. (Reason: Method not found..
Could not open library '#3SLicense'. (Reason: The placeholder library..
Could not open library '#CAA Device Diagnosis'. (Reason: Method not found..
Could not open library '#Standard'. (Reason: Method not found..
Could not open library '#BreakpointLogging'. (Reason: Method not found..
I would thank very much for any help because I was very excited about Codesys and I am totally frustrated. I didn't pay any license. I understood Codesys is for this free.
I tried to installed Codesys first in a Virtual Maschine and then in a physical computer. I always get this 10 errors after installation. Thank you.
Hello,
My issue was solved. I want to write here the resolution for everybody.
The issue was solved after Windows 10 Pro update.
So, the problem was not coming from Codesys but from Windows 10 Pro.
I have a retail licence of Windows 10 Pro. I had recently installed Windows 10 Pro on my virtual maschine running on macOS Monterrey. When Windows 10 got selfupdated I found that Codesys is running OK.
Thank you to anybody and to Codesys for this fantastic piece of software.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I just installed Codesys v3.5 SP18 Patch 2 on Windows 10.
I also installed the frameworks .NET as required by the installer.
When I try to create a new project I get 10 errors in the Codesys GUI.
Standard Project > Control Win V3 x64
Errors Precompile
C0046: Identifier 'DED.CAADiagDeviceDefault' not defined
C0046: Identifier 'DED.INode' not defined
C0046: Identifier 'g_itfRootINodeInst' not defined
C0046: Identifier 'IoConfigTaskMap' not defined
C0046: Identifier 'IoConfParameter' not defined
Errors Library Manager
Could not open library '#IoStandard'. (Reason: Method not found..
Could not open library '#3SLicense'. (Reason: The placeholder library..
Could not open library '#CAA Device Diagnosis'. (Reason: Method not found..
Could not open library '#Standard'. (Reason: Method not found..
Could not open library '#BreakpointLogging'. (Reason: Method not found..
I would thank very much for any help because I was very excited about Codesys and I am totally frustrated. I didn't pay any license. I understood Codesys is for this free.
I tried to installed Codesys first in a Virtual Maschine and then in a physical computer. I always get this 10 errors after installation. Thank you.
Hello,
My issue was solved. I want to write here the resolution for everybody.
The issue was solved after Windows 10 Pro update.
So, the problem was not coming from Codesys but from Windows 10 Pro.
I have a retail licence of Windows 10 Pro. I had recently installed Windows 10 Pro on my virtual maschine running on macOS Monterrey. When Windows 10 got selfupdated I found that Codesys is running OK.
Thank you to anybody and to Codesys for this fantastic piece of software.