Has anybody tried two build a CANbus network with 2 slaves, Raspberry Pi (Bullseye) and Waveshare 2-CH CAN FD HAT rev2.1 and get it to work with CODESYS Control for Raspberry Pi MC SL 4.4.0.0 or any other version?
can0 is using interrupt 25 with the above setup
Every time I make I do a warm reset. I receive a message:
Message from syslogd@cilix-19 at Jul 6 13:21:54 ...
kernel:[ 25.987276] Disabling IRQ #82
(Which is related to interrupt 25), in a terminal window.
Is that normal?
Last edit: DavidBo 2022-07-06
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Has anybody tried two build a CANbus network with 2 slaves, Raspberry Pi (Bullseye) and Waveshare 2-CH CAN FD HAT rev2.1 and get it to work with CODESYS Control for Raspberry Pi MC SL 4.4.0.0 or any other version?
can0 is using interrupt 25 with the above setup
Every time I make I do a warm reset. I receive a message:
Message from syslogd@cilix-19 at Jul 6 13:21:54 ...
kernel:[ 25.987276] Disabling IRQ #82
(Which is related to interrupt 25), in a terminal window.
Is that normal?
Last edit: DavidBo 2022-07-06