I see forge examples for 1734 IO line, I've tried the EDS files for the 1794 series but no luck. AB manuals don't provide much information as to how to integrate to it and I'm wondering if this is a dead end road.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
These modules designed to be controlled by RA PLCs only.
Customers should contact the 3rd party controller vendor for details on how to use Flex I/O product with their controller of choice. No additional information is available for customers through RA TechSupport."
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I see forge examples for 1734 IO line, I've tried the EDS files for the 1794 series but no luck. AB manuals don't provide much information as to how to integrate to it and I'm wondering if this is a dead end road.
From my cross posting on other forums I was provided with this link to an RA technote where they said probably not going to work.
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/493993
"1794 Flex I/O:
These modules designed to be controlled by RA PLCs only.
Customers should contact the 3rd party controller vendor for details on how to use Flex I/O product with their controller of choice. No additional information is available for customers through RA TechSupport."
It might be possible, Try asking on http://www.plctalk.net/
There are experienced engineers that deal with Rockwell and Codesys on there.
If you do get a solution please post it back here for others.