I use Codesys 3.5 SP12 Patch 1 provided by TURCK, and CANopen Manager 3.5.10.0 from 3S
In our application we have to send PDOs asynchronously (Type 255) with certain time interval, but I only see PDOs from CANopen Manager on change of values. In other words if I put BLINK with 250ms in one of the PDOs - PDO will be sent with 250ms period.
Everything is working correct except the data transmission type. Any ideas why?
Thanks in advance!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have a PLC http://pdb2.turck.de/nl/DE/products/000000420000378b0004003a configured as a CANopen Manager and EPEC 6107 display https://epec.fi/products/embedded-display-6107/ as CANopen device.
I use Codesys 3.5 SP12 Patch 1 provided by TURCK, and CANopen Manager 3.5.10.0 from 3S
In our application we have to send PDOs asynchronously (Type 255) with certain time interval, but I only see PDOs from CANopen Manager on change of values. In other words if I put BLINK with 250ms in one of the PDOs - PDO will be sent with 250ms period.
Everything is working correct except the data transmission type. Any ideas why?
Thanks in advance!