ABB Automation Builder v2.5.0.22 Premium
CodeSys 2.3.9.62
Running on Win 10 VM x64
Goal:
I have an EtherCAT topology issue which normally a "Scan for devices.." on the EtherCAT master would shed some light on.
Issue:
Upon trying such I get a "No gateway selected" error.
Question:
How might I point the the "scanner" at a gateway?
What is working:
Gateway is running in system tray. I can go online to PLC. A scan from the "Diagnostics live" tab of the EtherCAT master gives slave status.
What I have tried:
Restarting gateway in system tray. Exiting system tray gateway and reloading it.
Turning off firewall.
Contacting ABB support multiple times.
Scan from "IP-Configuration" with PC connected to first EtherCAT slave and "EtherCAT" tick box ticked gives slave info. As does ticking the "Emergency" tickbox.
ABB Automation Builder v2.5.0.22 Premium
CodeSys 2.3.9.62
Running on Win 10 VM x64
Goal:
I have an EtherCAT topology issue which normally a "Scan for devices.." on the EtherCAT master would shed some light on.
Issue:
Upon trying such I get a "No gateway selected" error.
Question:
How might I point the the "scanner" at a gateway?
What is working:
Gateway is running in system tray. I can go online to PLC. A scan from the "Diagnostics live" tab of the EtherCAT master gives slave status.
What I have tried:
Restarting gateway in system tray. Exiting system tray gateway and reloading it.
Turning off firewall.
Contacting ABB support multiple times.
Any help appreciated.
Scan from "IP-Configuration" with PC connected to first EtherCAT slave and "EtherCAT" tick box ticked gives slave info. As does ticking the "Emergency" tickbox.