Hello Mr./Ms.,
I invested Raspberry Pi lot of time to get the output from the raspberry PI5. But, i did not get the signal.
I use a raspberry pi 5> RS485 can hat > Modbus RTU, Industrial 8-ch analog acquisition module >weight transmitter jy-s60> S-load cell. I did not able to receive the signal from Modbus RTU to Raspberry PI5 where I use the RS 485 serial connection.
Hello Mr./Ms.,
I invested Raspberry Pi lot of time to get the output from the raspberry PI5. But, i did not get the signal.
I use a raspberry pi 5> RS485 can hat > Modbus RTU, Industrial 8-ch analog acquisition module >weight transmitter jy-s60> S-load cell. I did not able to receive the signal from Modbus RTU to Raspberry PI5 where I use the RS 485 serial connection.
You need an SPI driver for the board.
If there is nothing on the net, you will have to write one yourself