When trying to activate a control Basic L license on a Wago PFC200 750-8203 the error The selected container ... does not fit your ticket comes up and won't allow licensing. I have deleted the /var/opt/codesys/cmact_license/ content 3 times and the container number changed each time after a reboot, but the problem persists. Not a happy first time experience with those weird application based licenses.
IDE is 19.20.
This was a e!Cockpit FW22 PLC and I used Deploy Control SL to make the green web interface red.
WBM shows Codesys 2 and e!Runtime active which is a bit weird.
What do I do now?
Regards
Heinz
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Update, installed 3.5.19.70 with the same result. The error message is as useful as a chocolate fire guard.
The container SN is in the 130-xxx range which should work. The Version, Chip, Rev number don't mean anything to me. There is no SD Card installed.
I've also reinstalled a fresh Wago FW22 image, Deployed PFC200 SL and Edge for Linux, still the same result.
Last edit: teichhei 2025-01-09
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
After correspondence with Mr Schwellinger from Codesys the resolution for this was to uninstall the SL 4.14 and install SL 4.13 on the device. Once this was done the licensing worked as expected. I noted that the container then showed a Version 3.00 and not 0.00.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
When trying to activate a control Basic L license on a Wago PFC200 750-8203 the error The selected container ... does not fit your ticket comes up and won't allow licensing. I have deleted the /var/opt/codesys/cmact_license/ content 3 times and the container number changed each time after a reboot, but the problem persists. Not a happy first time experience with those weird application based licenses.
IDE is 19.20.
This was a e!Cockpit FW22 PLC and I used Deploy Control SL to make the green web interface red.
WBM shows Codesys 2 and e!Runtime active which is a bit weird.
What do I do now?
Regards
Heinz
I'm also having the same problem with raspberry 4
Not sure this will help you but I had the same issue and was able to activate the license on a Windows PC using the Web Depot in a web browser.
https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_installing_license.html
Don't I need a browser on the device for web depot? Could work on the Pi but not the Wago controller. Maximum I have is SSH.
Update, installed 3.5.19.70 with the same result. The error message is as useful as a chocolate fire guard.
The container SN is in the 130-xxx range which should work. The Version, Chip, Rev number don't mean anything to me. There is no SD Card installed.
I've also reinstalled a fresh Wago FW22 image, Deployed PFC200 SL and Edge for Linux, still the same result.
Last edit: teichhei 2025-01-09
After correspondence with Mr Schwellinger from Codesys the resolution for this was to uninstall the SL 4.14 and install SL 4.13 on the device. Once this was done the licensing worked as expected. I noted that the container then showed a Version 3.00 and not 0.00.