Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Good afternoon, who has encountered how in PFC200
- Work with the COM port and choose the mode (232 or 485)
- Does OPC UA from codesys work?
- The demo version in 4.5.0.0 of the LED control does not work for me, writes an error accessing the library.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi
OPC UA from codesys (via symbol configuration) works on the PFC200. But it puts a lot of strain on the CPU. So if you have too many variables, updated too frequently, the Codesys Runtime may crash/shut down due to high cpuload.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Good afternoon, who has encountered how in PFC200
- Work with the COM port and choose the mode (232 or 485)
- Does OPC UA from codesys work?
- The demo version in 4.5.0.0 of the LED control does not work for me, writes an error accessing the library.
Hi
OPC UA from codesys (via symbol configuration) works on the PFC200. But it puts a lot of strain on the CPU. So if you have too many variables, updated too frequently, the Codesys Runtime may crash/shut down due to high cpuload.
Tell me have you used RS interfaces?
The fact is that if I add a symbolic configuration, I immediately have a bunch of errors, and accordingly it does not compile.