Hi, Two years ago i used EdgeBox-RPI-200 with Codesys and serial ports works fine. Now I try run the same application but only new runtime but serial ports doesnt works:
I have two serial:
/dev/ttyACM0 - RS485
/dev/ttyACM1 - RS232
and below configuration in my sudo nano /etc/CODESYSControl_User.cfg:
[SysCom]
Linux.Devicefile=/dev/ttyACM
But it doesnt work. what can i do ?
Last edit: damian177 5 days ago
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi, Two years ago i used EdgeBox-RPI-200 with Codesys and serial ports works fine. Now I try run the same application but only new runtime but serial ports doesnt works:
I have two serial:
/dev/ttyACM0 - RS485
/dev/ttyACM1 - RS232
and below configuration in my sudo nano /etc/CODESYSControl_User.cfg:
[SysCom]
Linux.Devicefile=/dev/ttyACM
But it doesnt work. what can i do ?
Last edit: damian177 5 days ago