How can we configure autostart of TargetVisualization on the remote device?
The device is a Raspberry PI CM4 with PIXEL Desktop on display. I installed Targetvisu for Linux SL 4.16.0.0 on it.
After each restart of the Raspberry PI CM4, we have to start Targetvisu fot Linux SL manually.
i tried the step on this page: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_target_visu_for_linux.html
but i don't get it working
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
How can we configure autostart of TargetVisualization on the remote device?
The device is a Raspberry PI CM4 with PIXEL Desktop on display. I installed Targetvisu for Linux SL 4.16.0.0 on it.
After each restart of the Raspberry PI CM4, we have to start Targetvisu fot Linux SL manually.
i tried the step on this page: https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_target_visu_for_linux.html
but i don't get it working