CODESYS Forge - CODESYS Forge / Talk / Visualization 🇬🇧: how to dynamicly change rectangle height

Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

how to dynamicly change rectangle height

Forum: Visualization 🇬🇧

Creator: deividasn

Created: 2022-11-09

Updated: 2022-11-15

deividasn - 2022-11-09

Hello is possible on webvisu dynamicly change rectangle height? i wil visualise tank
thanks

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

masmith1553 - 2022-11-09

Use the Bar Display Element instead of a Rectangle.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- deividasn - 2022-11-09
  
  thanks for answer, but bar display is not looking good
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

masmith1553 - 2022-11-09

You can use a line and dynamically change the width, but it changes in both directions.

I did this for a element that needed to be at a 45 degree angle which a bar display can't do.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- deividasn - 2022-11-09
  
  tx i wil try
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Tyro - 2022-11-10

you can also use polygon with dynamic points. As they say...many ways to Rome!!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

sgronchi - 2022-11-10

You can use the "Relative movement properties" of the rectangle: https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html#UUID-09c53adc-3a90-3f8d-f30d-689f581b7c5f

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- deividasn - 2022-11-10
  
  Thanks its working!
  
  P_20221110_202624.jpg
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
  - hoprodgarage - 2022-11-14
    
    How many objects is that tank visualization made of? Is it possible for you to share how you made/solved that visualization ? :) Looking for something similar for my brewery HMI
    
    If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
    - deividasn - 2022-11-14
      
      Hello, this tank a have 4 elipses 2 rectangles and 2 lines. I can share this example
      
      👍
      2
      
      If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
      - hoprodgarage - 2022-11-14
        
        That would be AWESOME! Thanks 🙌
        
        If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

deividasn - 2022-11-14

Made with raspberry Pi

👍
2

TankExample.projectarchive

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- hoprodgarage - 2022-11-15
  
  Thank you very much for sharing the example 👏
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.