Post by eschwellinger on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
latest Edge should solve it
Last updated: 2024-11-20

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
I believe the reason that I eventually lose my ability connect is because of exceeding the time limit for demo mode. Still unsure why I cannot update the edge gateway though.
Last updated: 2023-09-13

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
ok now it is clear - this is a single core Pi Zero W. For this device there is no edge device available. But just for working with CODESYS it is not really needed and yes plc runs only for 2h unlicensed.
Last updated: 2023-09-13

Function block that after 2 rising edge it gives a bool and resets every 3 seconds ^{CODESYS Forge talk (Thread)}
Function block that after 2 rising edge it gives a bool and resets every 3 seconds
Last updated: 2023-04-07

Post by fasica on CODESYS Edge Gateway for Linux on embedded distribution ^{CODESYS Forge talk (Post)}
It's possible find or build a CODESYS Edge Gateway for Linux on embedded distribution like Yocto or other version? Thanks, Andrea
Last updated: 2024-04-16

Post by eschwellinger on Codesys Virtual Control - startup problem ^{CODESYS Forge talk (Post)}
I think you have already up and running an Edge on the host ( not in the container) please uninstall that edge, then it should work.
Last updated: 2024-08-13

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
if this does not work, you could install the 3.5.20.0 Gateway from the CODESYS Store. https://store.codesys.com/de/codesys-edge-gateway-for-windows.html then it is possible to enable it by righclick inthr task tray
Last updated: 2024-10-21

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello, I couldn't figure what/where the issue was, so I deleted everything from automation server and reinstalled the edge gateway and did the process again. It worked for about a month and then it stopped working again. It presents the same symptom, edge gateway is online but I can't connect to the PLC. Any idea of what could be the issue? Thank you!
Last updated: 2024-01-09

Post by danwoodlock on RPI zero W - cant install edge gateway ^{CODESYS Forge talk (Post)}
I see now this is the wrong section. Please close this thread, and I'll repost in the runtime section.
Last updated: 2023-09-13

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Thank you for the recommendation! attached result of 'usname -a'
Last updated: 2023-09-13

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello, Up until yesterday (2023/11/20) I was able to connect to the PLC remotely with no issues through Edge Gateway. However, today I can see the Edge Gateway online but I can find the PLC even if I do a network scan. Following the same path as janber0206 @ https://forge.codesys.com/forge/talk/automation_server/thread/e78b11d7e9/, I looked into certificates and found that one of the Trusted publisher certificates has expired earlier today (2023/11/21). Please see image. Questions are: Does it affect the connection to the PLC through Edge Gateway? How do I fix it? Thank you very much in advance!
Last updated: 2023-11-21

Post by eschwellinger on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
need the log file - or you write/send it in the CODESYS store my question
Last updated: 2024-01-10

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
yes add in: c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\XXXXXXXX\Gateway.cfg [CmpEdgeGateway] MaintenanceMode=1
Last updated: 2024-10-21

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Hello all, First post. I recently acquired an RPI zero W from amazon, and have been using it with Codesys v3.5 SP19 patch 2. I first got it working yesterday, and after installing the runtime on the Pi, I was prompted to install the edge gateway. Installation of the edge gateway failed because of unsupported architecture, undeterred I was able to connect to the pi and program as I wanted. The issue I've noticed is that if I do not load anything to the pi overnight, I can then no longer connect to the pi and download, although I can still ping it from my pc. I found that if I power cycle the PI, I am then able to connect again, and it works as normal. I did some googling and found instances where people recommended downloading the newest edge gateway, which brings me here. Wondering if there are any suggestions, or if this is a known issue. I actually tried installing all 3 versions of edge gateway for science, but all fail with the same message. Thanks -Dan
Last updated: 2023-09-13

Post by eschwellinger on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
we need some logfiles from the edge gateway /etc/Gateway.cfg [CmpLog] CmpEdgeGateway.Filter=0xFFFFFFFF Logger.0.Name=/tmp/codesysedge.log Logger.0.Filter=0x0000000F Logger.0.Enable=1 Logger.0.MaxEntries=100000 Logger.0.MaxFileSize=5000000 Logger.0.MaxFiles=1 Logger.0.Backend.0.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Type=0x314 ;Set the timestamp to RTC and does the scan via Automation Server show the plc?
Last updated: 2024-01-09

Post by eschwellinger on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
check 'uname -a' by ssh connection - addtional you'll probaly find the reason for not running with application by 'cat /var/opt/codesys/codesyscontrol.log' incase you are using 4.9.0.0 runtime version
Last updated: 2023-09-13

Post by danwoodlock on RPI Zero w - Edge gateway cant install ^{CODESYS Forge talk (Post)}
Thanks very much for the explanation. I am basically new to the rpi world, but somewhat familiar with the indraworks/CtrlX versions of codesys. Appreciate your help.
Last updated: 2023-09-13

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hello Edwin, I sent the info through CODESYS store my question, as I was afraid that I could be exposing sensitive information here in the forum. Thank you very much!
Last updated: 2024-01-10

Post by rmaas on How to use/create SOTU in LD program ^{CODESYS Forge talk (Post)}
You can use the R_TRIG and F_TRIG function blocks to generate a pulse in Rising or Falling edge of your signal. Have a look here: https://content.helpme-codesys.com/en/libs/Standard/Current/Trigger/R_TRIG.html
Last updated: 2024-07-11

Post by mikek10 on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Most FBs clock on the rising edge so if they are never called with xExecute = False then subsequent actions will not be performed.
Last updated: 2024-07-18

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
sure on each installation this random number is generated so you need to ckeck which one is the right one to modify
Last updated: 2024-10-21

Post by tmo21 on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Edwin, Thanks for your message. Edge controller Version: 4.4.0.0 based on 3.5.17.30 PLC version: Device Identification Name CODESYS Control for Raspberry Pi MC SL Vendor 3S - Smart Software Solutions GmbH Device type Softmotion3S Firmware version 4.4.0.0
Last updated: 2024-10-23

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved (see comment) Setup: Kunbus RevPi Connect+ (a raspberry based PLC) Codesys runtime package: 4.5.0.0 (raspberry, armhf) based on Codesys V3.5.18.20 Edge Gateway: 4.5.0.0 (edgearmhf,armhf) EN: The edge-gateway was added over a year ago to the automation server. I now need to make a few changes to the Codesys software, but the Pi is not showing as online in the Automation Server. Internet connection is established, I have remote access to the Pi via RealVNC. Anyone have an idea how I can solve this? Some screenshots added. DE: Ich muss nun ein paar Änderungen an der Codesys-Software vornehmen, aber der Pi wird im Automation Server nicht als online angezeigt. Die Internetverbindung ist hergestellt, ich habe über RealVNC Fernzugriff auf den Pi. Hat jemand eine Idee, wie ich das Problem lösen kann?
Last updated: 2023-10-26

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html). When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message. I have installed all the latest versions codesys and of the components mentioned in the guides. How can i solve that problem?
Last updated: 2024-10-21

Post by bruno-roth on Fehlender Menu-Eintrag RaspberryPI ^{CODESYS Forge talk (Post)}
Hallo, ich habe CODESYS 3.5 SP19P6 installiert und auch das Plugin für Raspberry PI aber im Tools menu taucht das Update Rapsberry pi nicht auf . Das Plugin wird irgendwie nicht richtig installiert ? auch das Edge -Gateway update Menu ist nicht vorhanden. Ich habe alles mit Admin installiert. was geht hier schief?
Last updated: 2024-02-26

Sort by relevance or date