Post by smic on put the Port number 80808 in Instance Setting of Deploy Control SL ^{CODESYS Forge talk (Post)}
I am using CODESYS V3.5 SP20 Patch 5. I am trying to use the Webvisu function on a PLC running on Docker. When I enter the port value 8080:8080 in the Instance Setting in Deploy Control SL, it is not saved. Can you please help me?
Last updated: 2025-02-21

Post by timvh on TargetVisu started in windowed or not full screen ^{CODESYS Forge talk (Post)}
In your soft plc folder, there is a file called targetvisuextern.cfg. Open this with a text editor to change the settings. Remove the semi-colons in front of the lines to enable your custom window settings. WindowType=0 means you will get a moveable window. Save the file and restart the soft PLC to enable these settings.
Last updated: 2025-02-26

Post by eschwellinger on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
Yes, either adding in the CODESYSContro_User.cfg because the driver will no longer appear in the list or type the name from the documentation in the configuration and when the gray check mark appears, the driver is also installed. It is just not selectable anymore.
Last updated: 2025-03-21

Post by kevinm on Attaching Trace variable to Frame Configuration Variable ^{CODESYS Forge talk (Post)}
Is it possible to show a variable from a Frame Configuration in a Trace on that Visualization? I want to pass the FB for an AXIS_REF_ETC_SoE_Standard to the visualization and display live axis data in the visualization. However, I cannot find a way to use a Frame Configuration variable in the Trace Configuration dialog.
Last updated: 2025-04-04

Post by atone on Set DeviceID of an IO-Link Sensor at Runtime ^{CODESYS Forge talk (Post)}
Answering to myself: is not possible according to the IFM support, this possibility has not been taken into account, although the interfaces and FBs in Codesys would apparently support it. So I ended up having to deactivate the sensor validation and the backup & restore functionality in the master and implement it in the PLC myself.
Last updated: 2025-04-28

Post by felixm on Unable to select VisuDialogs.Numpad in Open Dialog input configuration ^{CODESYS Forge talk (Post)}
I'm trying to open the VisuDialogs.Numpad dialog to enter a new temperature setpoint on one of my VISU screens. For some reason, the numpad dialog does not appear as an option in the Open Dialog dropdown in my input configuration. I'm very new to CODESYS, so sorry if this is a simple fix/known item XD.
Last updated: 2025-07-10

Post by fkoenig on Codesys Control Win 64 3.5.21.0 KNX unaufgelöste Referenzen ^{CODESYS Forge talk (Post)}
Hallo Herr Schwellinger, wenn ich den KNX Stack in Ihrem Pfad des Configfiles hinzufüge, funktioniert es. Vielen Dank für Deine Unterstützung! Es wäre aber sehr hilfreich wenn dies in dem KNX Dokument oder in der der CoDeSys Hilfe mit drin stehen würde. Viele Grüße, Koeni
Last updated: 2025-07-14

Post by timvh on IECStringUtils.FormatDateTime ^{CODESYS Forge talk (Post)}
There has been a fix in SP21. I tried it in this version with the option "Use unicodestring" enabled in the Visualization Manager and it worked if the variables used for the function are declared as WSTRING variables wsFormat : WSTRING := "%t[HH:mm:ss dd.MM.yyyy]"; wsTime : WSTRING; IECStringUtils.FormatDateTime(cbpResult := ADR(wsTime), uiResultCapacity := SIZEOF(wsTime), cbpFormat := ADR(wsFormat));
Last updated: 2025-07-29

Post by ulvis on Where to find the OPC-UA Information Model Repository ^{CODESYS Forge talk (Post)}
Now, for CODESYS v3.5 SP21 I can no longer find the "OPC UA Information Model Repository" entry to add as a command. In the "Tools" menu it is listed but greyed out, reporting "Plug-in is not available". So how do I add the Plug-in?
Last updated: 2025-08-14

Post by onstage on Unable to add EL6751 to Control RTE V3 on W11 IoT LTSC using Eng. V3.5 SP21 ^{CODESYS Forge talk (Post)}
I have working EtherCAT since it can be scanned for slaves, but then I'm stuck getting the information that the device isn't found in the repo. As far as I can see both revisions does however exist in the device repo. Component added in the Configfile. Anyone with some similar experiences?
Last updated: 2025-09-04

Post by ranadheer on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
Thank you Pernockham, I am using Windows SoftPLC and the device is CODESYS Control Win V3 x64. In the above attached example, the file is Linux-based. This is an external add-on file in the CODESYS installer (CODESYS Control for PLCnext SL). I am trying to implement it without this add-on file.
Last updated: 2025-09-09

Post by snhatton on How to write a for loop in ladder? ^{CODESYS Forge talk (Post)}
Hi there, little late to the party, but you could also use the ST block for in-line ST code and implement a for loop as you normally would. ST Block is super handy if you just need a small amount of in-line structured text code without creating a new POU. Hope this helps!
Last updated: 2025-10-06

Post by svn123 on In Simulation Mode, logic is not executing ^{CODESYS Forge talk (Post)}
I stopped the simulation and tried to rebuild. "Cloned Task0.task0. Priority already in use" error was shown after rebuilding. I used Build-Clean All option and rebuilt again. Now the logic started working. But I am not still sure what caused the error in first place. If somebody knows about this error, please enlighten me. Thanks svn
Last updated: 2023-12-25

Post by dhumphries on Execution Order of Function Blocks ^{CODESYS Forge talk (Post)}
Function blocks in a SFC are executed left to right, top to bottom, instructions in ST are executed from left to right top to bottom as well. I think you are asking about the execution of POUs although you use the name function block, I believe POUs are executed in the order they are shown under the main task.
Last updated: 2023-12-28

Post by scarter on Bit / Bool data types in function parameters ^{CODESYS Forge talk (Post)}
Any reason BIT and BOOL data types are not interchangeable? Trying to make a function which takes a BOOL IN/OUT parameter (Not allowed to use BIT) In the main logic if I make a DINT variable, and want to use each bit on different functions CODESYS will not allow it.
Last updated: 2024-01-17

Post by hagroth on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Today I was struggling with the same problem. in search for a solution i found this thread. Then i tried some things. It doesn't seem to be just a libraries' fault. In addition to 3.5.19, we also have a 3.5.18 version installed, the library versions of Modbus_TCP_Master and Modbus_TCP_Slave are the same, but more than 10 slave channels can be added in 3.5.18
Last updated: 2024-02-02

Post by nima-khajehali on Touch Issues in Tablet (HMI) ^{CODESYS Forge talk (Post)}
Hi Everybody, I download the Visualization on the Dell tablet as HMI. The button of HMI does not work with any touches. However, the buttons is working well with a plugged in mouse. Is there any configuration in Visu. manager or setting that I can modify? (Latitude 7230 Rugged Extreme Tablet) Please help me.
Last updated: 2024-02-08

Post by durstloescher on Library Documentation DocScripting ^{CODESYS Forge talk (Post)}
Hi, I am currently creating a documentation for our library with DocScripting. In the process, I noticed that Visu images are created before the merge and transform, i.e. "screenshots" of the different Visus. Unfortunately, these are not used in the later process (Merge/Transform). Is there a way to set it up so that they are found in the html file?
Last updated: 2024-02-19

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hello dear colleagues. I have an ESTUN PRONET servo. I'm trying to control via softmotion over the CANopen bus. There is no Ethercat bus in this servo model. In another project,using Ethercat , I controlled four axes. I have problems with ESTUN PRONET servos. A DSP-402 driver mismatch is likely. I would be very grateful for your help in solving this problem.
Last updated: 2024-03-10

Post by dhumphries on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
I have discovered a rounding error, either in Codesys or in my understanding of numbers. The attached ladder shows that when the up button is pressed the number increases by 0.1, when the down button is pressed number decreases by 0.1, after several button presses the number isn't equally divisible by 0.1. Have I discovered a bug or am I doing something wrong?
Last updated: 2024-04-27

Post by fjgonzalez on Timer On Vijeo ^{CODESYS Forge talk (Post)}
Hi. I'm trying to show in Vijeo Designer a timer countdown. But I want to display the data in hour, minutes and seconds. I tried to change the data by converting in the Machine Expert but not able to succeed. Can you help me to find a solution? Regards, FG
Last updated: 2024-05-07

Post by rajesh008 on i can't declear the address in GVL - codesys SP19 Patch5 ^{CODESYS Forge talk (Post)}
The “_AB AT %IW0:word; ” if i called the value then im getting this error. like below "the declartion of the variable with an address assignment cannot be used in a PRG or GVL with the attribute 'subsequent'" This is happening when the GVL is selected in Redundancy Configuration. if i un-select the address declaration is working fine
Last updated: 2024-05-13

Post by micik on CAA File- FILE_OPERATION_DENIED error ^{CODESYS Forge talk (Post)}
Hello, I'm trying to use FILE.Open to open file that exists in the given location. sFileName is formed from "Copy as path" in Windows. So I'm sure file exists and it is in the given location. And still, I get thiss denied error. What could be the problem here? Attached is a screenshot with current implementation.
Last updated: 2024-05-16

Post by schnepper on How to delete main action from SFC Step ^{CODESYS Forge talk (Post)}
I added a main action to an SFC step, and then tried to delete it. There is no delete option in the SFC menu nor in the right click menu of the step. I deleted the action from the device tree, but building results in and error saying the action is not defined. Is there a way to delete a main action?
Last updated: 2024-05-23

Post by talhaali on Active alarm access in ST ^{CODESYS Forge talk (Post)}
Hi, I am trying to access active alarms in code(As alarm count variable updates only when we go to to alarm table frame in visualization). I wrote following code but it is not working: VAR iCountActiveAlarms : INT; parritfActiveAlarms : POINTER TO ARRAY[0..0] OF IAlarm; itfAlarmManagerClientAll : IAlarmManagerClient; END_VAR AlarmManager.g_AlarmHandler.GetActiveAlarms( itfAlarmManagerClient :=itfAlarmManagerClientAll, iCountActiveAlarms => iCountActiveAlarms, parritfActiveAlarms => parritfActiveAlarms); The Value is always 0. Please help.
Last updated: 2024-06-06

Sort by relevance or date