Post by ahmedbadawi10 on Codesys Trend Problem ^{CODESYS Forge talk (Post)}
I have control win v3 with simulation and a small program with function to convert analog values to percentages, I need to show these percentages in a trend chart, but nothing is shown in the trend as you see in snips attached! thanks in advance
Last updated: 2025-09-16

Post by kurtk on How to change keyboard layout on the virtual keyboard? ^{CODESYS Forge talk (Post)}
which "demo templates" did you use and from whence did you obtain them ? I don't see anything like that in the above library
Last updated: 2025-09-17

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
I am using a new project, with nothing, but when add a simple cam table, and compile, there will be errors. It seems some add-on or library was missing, but there is not any hint. Could you help, please.
Last updated: 2025-09-18

Post by gseidel on Arcs intersection ^{CODESYS Forge talk (Post)}
Hi blitz, the G1 sentences N50, N70, and N110, which have length 0, lead to a stop of interpolation between the arcs. If you remove these lines, SMC_SmoothPath works (I tried it). Bst regards, Georg
Last updated: 2025-09-24

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
the procedure is usually 1. install the Licenserver (on the host) with the deploy tool in CODESYS) 2. if you go to the CODESYS WBM you should see an empty Softcontainer 130-xxxxxx 3. activate the license with SoftContainer number and ticketnumber that was it!
Last updated: 2025-10-01

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your detailed and thoughtful feedback. We will discuss the topic in our team. Best regards, Georg
Last updated: 2025-10-02

Post by timvh on Licensing info not available. ^{CODESYS Forge talk (Post)}
In the VPLC configuration settings there is an entry for the IP address of the license server. In this setting fill in the IP address of your device (host IP address). Then when the virtual PLC starts up, it will get the license from the license container on the host. You can do this for all VPLC's running on your device. The VPLC will always take the smallest license which fits the required license. So if you have 2 licenses for VPLC's with small and large applications, then this will work fine if you start up one VPLC which requires the small license and the other which requires the large license. PS, personally I find it much easier, especially for testing and experimenting, to activate the licenses on a CODESYS (USB) key. This is easy to activate (on your development PC) and easier to move to another device. Addtionally you don't loose the license when you need to install a completely new image on the device.
Last updated: 2025-10-02

Post by dogulas on numeric text box control ^{CODESYS Forge talk (Post)}
I am using TargetVisu in my v3.5 sp20 p6 (64-bit) project. I see no control that will allow me to bind, edit, and display a LREAL variable. Am I missing a library? If it exists, why can't I see it?
Last updated: 2025-10-02

Post by nchau on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
Yes, that's correct. I registered and visited the page at https://en.estun.com/?list_139/1380.html , but there were no ESI files available under the Data Download section. I also tried contacting the manufacturer directly, but haven’t received any response yet.
Last updated: 2025-10-03

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by dim54 on multiple entry of the Owner password ^{CODESYS Forge talk (Post)}
I have to enter the owner password from time to time, even though I haven't closed the project yet. Is there a way to disable this option? So I only have to enter it once when I log in to the project, and that's it.
Last updated: 2025-10-10

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by abjha1998 on Converting UINT into bytes and converting 2Bytes into UINT ^{CODESYS Forge talk (Post)}
Thank you for the reply. I got an error saying that MEM.PackBytesToWord(GVL.Actual_Speed_DUT_high,GVL.Actual_Speed_DUT_low) = u; is not a valid statement. Am I missing some library?
Last updated: 2023-12-08

Post by snhatton on Trace commands via Test Manager ^{CODESYS Forge talk (Post)}
One option could be to use a trigger variable to execute your trace and then toggle that variable from a step within a test case.
Last updated: 2023-12-08

Post by fransh on WAGO PFC200 FW25 unable to connect ^{CODESYS Forge talk (Post)}
Hi I set up my WAGO PFC200 controller and am unable to connect to the processor. Gateway is set to local host. I can connect to the unit with the WAGO Web Based management but not with Codesys V3.5 SP18.5. Any suggestion?
Last updated: 2023-12-09

Post by voffi on About Codesys Task Executions ^{CODESYS Forge talk (Post)}
A task in CODESYS normally is a task of the underlying operating system. If your os is preemptive and the sheduler is configured accordingly a CODESYS task will be preemptive too.
Last updated: 2023-12-14

Post by open on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
Thanks everyone for your input, I am using persistent variables to retain the timer value after machine shutdown, and main task to be as low as possible for the seconds TON to be accurate.
Last updated: 2023-12-14

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by spiessli on Raspberry Pi 4 with Legacy Drivers and Codesys 3.5.19 Patch 4 ^{CODESYS Forge talk (Post)}
In fact, specifying to use SM3_Basic library in version 4.14 fixes the issues, choosing 4.16 raises the same issues. (Library Manager > Place Holder > Double click on SM3_Basic > Show all versions)
Last updated: 2023-12-19

Post by giackanto on Eoe issues with Windows and Linux ^{CODESYS Forge talk (Post)}
Hi eschwellinger, I changed the name to tap2 due to network issues with Debian (I don't know why it changes the tap0 IP every time the program restarts). Anyway, I think the tap name doesn't affect the connection.
Last updated: 2023-12-20

Post by marekxc on Little endian to Float from Modbus RTU ^{CODESYS Forge talk (Post)}
Maybe try going back to step one and: Var Reg1: WORD; Reg2: WORD; Reg12: DWORD; Value: REAL; end_var // program Reg1:= 4096; Reg2:= 14884; Reg12:= (reg2 * 65536) + reg1; Value:= DWORD_TO_REAL(Reg12);
Last updated: 2023-12-28

Post by marekxc on Translation - How to get text as reference in Frames translated? ^{CODESYS Forge talk (Post)}
Show a simple example of what you're doing. What and where are you changing? Maybe this link will be useful to you" https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_using_visu_as_element.html
Last updated: 2023-12-29

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by reinier-geers on Time zone ^{CODESYS Forge talk (Post)}
I use a controller with Linux. I try to change timezone. but no result. The command of codesys i dont understand ?? And Linux Commands dont work. It stays at +0 . I want Amsterdam
Last updated: 2023-12-29

Sort by relevance or date