Post by davidbo on Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Post)}
When I use the FUNCTION_BLOCK ModbusChannel I have to sepcify the integer iChannelIndex It can easily go wrong if one has many channels. It would be better if one could use the name. Is that possible? Attached a snippet of the channel name and the channel index to the left.
Last updated: 2024-10-21

Post by jepl-1012 on configuration error for SM_Drive_GenericDSP402 ^{CODESYS Forge talk (Post)}
Hi All, I Am using Delta AX8 Controller And IndrDrive HCS01 With Ethercat COE (Cia402 Profile) .Communication has done properly but while i made MC_Power block on its not get enable. what is the issue can any one help me
Last updated: 2024-10-21

Post by banialuk on Modbus TCP Server ^{CODESYS Forge talk (Post)}
I created Modbus Server TCP, but when I try started i have a error "TCP socet error" "Error on open/close/read/write TCP socket."
Last updated: 2024-10-21

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
yes add in: c:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSGatewayV3\XXXXXXXX\Gateway.cfg [CmpEdgeGateway] MaintenanceMode=1
Last updated: 2024-10-21

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
Hello, i want to connect my automation server and i follow the steps as desribed in the video series(https://www.youtube.com/watch?v=iiPKyyO4M00&list=PLaws15OZmd7Uu2W23zX2w424aI3TrOfHf) and also that guide (https://content.helpme-codesys.com/en/CODESYS%20Automation%20Server/_cas_add_plc_to_server.html). When i go to "Allow Edge Gateway configuration.." from the Codesys gateway Systray running i get the message in the attached picture, so i open the Gateway.cgf but the file doesn't contain an cmpedgegateway section as mentioned in the message. I have installed all the latest versions codesys and of the components mentioned in the guides. How can i solve that problem?
Last updated: 2024-10-21

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
I installed patch 3 now and i get a new message, although i located and modified the files in system32 and sysWOW64 still doesn't work. One thing i noticed is thta in system32 folder CODESYSGatewayV3 now i have two different XXXXXXXX files with the latest being created today at the time of installation
Last updated: 2024-10-21

Modbus Server TCP -error code ^{CODESYS Forge talk (Thread)}
Modbus Server TCP -error code
Last updated: 2024-10-21

Post by banialuk on Modbus Server TCP -error code ^{CODESYS Forge talk (Post)}
Hello, I create modbus tcp server, but I have this error: how resolve this problem?
Last updated: 2024-10-21

Post by yoeri on Refresh visulization realtime ^{CODESYS Forge talk (Post)}
Hi everyone, I need some help with displaying an image (test.png) on my device. Initially, showing the image is straightforward. However, I want to be able to update the image dynamically. My goal is to send updated files via FTP to the device, and have the display automatically show the latest version of the image. All images will be sent with the same name (e.g., test.png). Currently, I can see the updated image after sending it via FTP and performing a warm restart, but I'd like to achieve this in runtime, without having to restart the display or application. Does anyone have suggestions on how to implement this? Thanks in advance!
Last updated: 2024-10-21

Post by bjarne-pagaard on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
Hi there, An "OPC Expert" client software is connecting to a Codesys Control RTE (x64) OPC UA Server. It reads only about 25 variables every 5 minutes. The OPC UA Server seems to shut down on the Codesys runtime. Is there any way to get information about the Codesys OPC UA Server status? Restart it? There is nothing in the PLC Logs after the OPC UA Server has started. It works for a while, then it doesn't. Any ideas? Any way of getting more info out of the Codesys OPC UA Server? -Bjarne
Last updated: 2024-10-21

Post by bjarne-pagaard on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
The Control RTE is 3.5.18.20, using the symbol configuration for exposure of variables.
Last updated: 2024-10-22

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
if this does not work, you could install the 3.5.20.0 Gateway from the CODESYS Store. https://store.codesys.com/de/codesys-edge-gateway-for-windows.html then it is possible to enable it by righclick inthr task tray
Last updated: 2024-10-21

OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Thread)}
OPC UA Server Status on Win RTE
Last updated: 2024-10-22

Post by eschwellinger on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
sure on each installation this random number is generated so you need to ckeck which one is the right one to modify
Last updated: 2024-10-21

Post by eschwellinger on OPC UA Server Status on Win RTE ^{CODESYS Forge talk (Post)}
latest version of the Control RTE?
Last updated: 2024-10-21

Post by dekelec on TrueType font problem ^{CODESYS Forge talk (Post)}
Initially I had the same problem in CoDeSys when selecting a newly installed TTF font, while CoDeSys was running. I solved it by closing Codesys and running it again to restart the initialization process. After that, using the new font did not pop up errors. I also had cases with files that had a ttf extension, but were actually not TrueType.
Last updated: 2024-10-22

Post by kbucsit22 on Ethercat Slave - Load PDO From Device ^{CODESYS Forge talk (Post)}
Hi All, I am using Control Win V3 x64. Anyone experiences to use Expert mode to map the Ethercat Slave device to press this Load PDO from Device, Pressed first time then nothing happens. Pressed second time then the software crashes. Best regards, Kenneth
Last updated: 2024-10-22

Post by dsa28 on OPC UA subscriber not operational ^{CODESYS Forge talk (Post)}
Hello All, Hopefully I can get some help configuring an OPC UA subscriber in a CODESYS runtime in a Raspberry Pi 5 that tries to retrieve data from an OPC UA publisher (in this case running in a TwinCAT system). I tried to follow the steps described in the page to implement the OPC UA subscriber: https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_opcua_pubsub.html Seems that the example provided was created with version 3.5.16.0. Now with version 3.5.20.20 is not possible to open the complete project neither convert it. Anyway, after configuring all IPs and ports used in the OPC UA connection function block but the connection state always shows DISABLED. Can someone help me to do the proper configuration of the OPC UA subscriber? Many thanks in advance.
Last updated: 2024-10-22

Ethercat Master ^{CODESYS Forge talk (Thread)}
Ethercat Master
Last updated: 2024-10-22

Post by mtnkyr on Ethercat Master ^{CODESYS Forge talk (Post)}
Hi everyone, I am working on a 3 axes Cartesian robot. I take control of all the axes. In the Ethercat connection, the drive sequence is the same as in the program. For example, in the current program the order is as follows. 1. Axis_Z 2. Axis_X 3. Axis_Y Communication Diagram PLC->Drive_Z->Drive_X->Drive_Y When I try to change the order in the program while keeping the communication diagram the same, there is an axis drive mismatch. How can I fix this?
Last updated: 2024-10-22

CANopen PDO Issue with Pressure Sensor in Codesys ^{CODESYS Forge talk (Thread)}
CANopen PDO Issue with Pressure Sensor in Codesys
Last updated: 2024-10-22

Post by taqamert on CANopen PDO Issue with Pressure Sensor in Codesys ^{CODESYS Forge talk (Post)}
Hello everyone, I am using an IFM CR0303 model PLC, which has a tilt sensor and a pressure sensor connected via CANopen. Both sensors are from the same brand (ATEK). I can read data from the tilt sensor without any issues, but I am unable to read data from the pressure sensor. I have added the EDS file in the PLC configuration and adjusted the node-ID settings. When I check with the PCAN-View application, I can see that the selected PDOs are coming through, but the data is not reaching the Codesys side. What could be the issue, and what can I try to resolve it? Can anyone help me?
Last updated: 2024-10-22

Post by sebastianrapi on Bibliothek: floatingpointutils ^{CODESYS Forge talk (Post)}
danke für deine Antwort. Ich habe nun einfach ein Projekt erstellt inklusive der Bib "FloatingPointUtils, 3.5.17.0 (System)" Beim Auswählen einer Funktion, z.B. HexStrToReal kommt die besagt Fehlermeldung...
Last updated: 2024-10-22

Post by martinus11 on CODESYS V3.5 SP11 error "Cannot find INavigatorControl5" ^{CODESYS Forge talk (Post)}
Hi I had the same problem with V3.5 SP10. How did you solve it?
Last updated: 2024-10-22

CODESYS V3.5 SP11 error "Cannot find INavigatorControl5" ^{CODESYS Forge talk (Thread)}
CODESYS V3.5 SP11 error "Cannot find INavigatorControl5"
Last updated: 2024-10-22

Sort by relevance or date