Post by pistola on How to change font and font color rectangle/or related object ^{CODESYS Forge talk (Post)}
Here is the help sections for visual elements rectangle. https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html Under "Font Variable" there is "Color" which is a Dword, you can make a variable that changes colour within your code to the color needed. Note the format for the Dword variable is: colorVariable := 16#TTRRGGBB Where: TT = Transparency 00-FF RE = Red 00-FF GG = Green 00-FF BB = Blue 00-FF https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_animate_color.html
Last updated: 2025-03-17

Post by imdatatas on Problem of assigning physical addresses to variables of type ARRAY OF ARRAY as MW and QW ^{CODESYS Forge talk (Post)}
Hello, I am encountering an interesting problem as below in SP20patch5 variable definition area. I think this is a bug. As can be seen in the attached screenshot, it assigns the same %MW or %QW address to all elements of the array. I hope Codesys team can solve this problem in the next version. Best regards, Imdat
Last updated: 2025-03-17

Post by atone on Change IO-Link Device Interface connected to a Profinet-Slave at Runtime ^{CODESYS Forge talk (Post)}
I need to be able to update (change) the interface of an IO-Link device at runtime. The reason is the connected sensor can be selected at runtime, and some sensors we use have a 2 byte IN interface, others have a 4 byte IN interface, others 16 byte IN, others 16 byte IN/OUT (see attached screenshot). Is it possible at all? When yes, which function should I use? Thank you!
Last updated: 2025-03-18

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
Hi Trusty-Squire, just seen you post , thanks for the reply. I was out on site the other day as it had done it again and changed a few things like cycle time etc. plc load is only 7% at its highest. I took a few screenshots while i was there to add to this post. its been up for about a week now but seems to happen at random every couple of weeks. fingers crossed!
Last updated: 2025-03-19

Post by atone on Set DeviceID of an IO-Link Sensor at Runtime ^{CODESYS Forge talk (Post)}
I need to be able to change (set) the DeviceID of an IO-Link sensor (see DeviceID.png) at runtime. I tried with both ProfinetCommon.PN_PortConfiguration and ProfinetCommon.IOL_PortConfiguration, but I get an error for both when I try to read the port configuration (see PN_PortConfiguration.png). Does one of those FBs is the right one for my purpose? Do I possibly make a mistake when assigning the parameter IOLD_ID/IOLM_ID?
Last updated: 2025-03-19

Post by agentcousto on (no subject) ^{CODESYS Forge talk (Post)}
Hello, I have developed a Python script that I run to import XML files into my project. For this, I use the Python function import_xml(). Everything was working fine when I was using Codesys platform plugins version 2.6.1.2320, but since I upgraded to versions 2.7 and even 2.8, some files are no longer imported correctly. After some research, I identified that all the files containing variables of the type "POINTER TO" are affected. I have attached a screenshot of the error I am encountering. Do you know about this bug? Do you plan to fix it?
Last updated: 2025-03-26

Post by lookingforhelp on CODESYS v3.5 SP18 ^{CODESYS Forge talk (Post)}
Hello @community, i hope i will get a solution for following problem. I am using CODESYS v3.5 SP18. At the visualization i dont see the action for the element which i could set below the InputConfiguration-Section. I found a topic about that, but this could be resolved through activate the Advanced Checkbox. But in my case it did not work. See the screenshots. I hope someone know this problem and have a solution. Thank you in advance.
Last updated: 2025-04-17

Post by lookingforhelp on CODESYS v3.5 SP18 ^{CODESYS Forge talk (Post)}
Hello @community, i hope i will get a solution for following problem. I am using CODESYS v3.5 SP18. At the visualization i dont see the action for the element which i could set below the InputConfiguration-Section. I found a topic about that, but this could be resolved through activate the Advanced Checkbox. But in my case it did not work. See the screenshots. I hope someone know this problem and have a solution. Thank you in advance.
Last updated: 2025-04-17

Post by nz-dave on sysfile- transfer file to pc ^{CODESYS Forge talk (Post)}
Hi Trying to send csv file to c:\data\xxx.csv Im able to save to plclogic and after doing this https://forge.codesys.com/forge/talk/Runtime/thread/5cac1390b4/ i can now "file transfer" to host pc downloads. but still cant transfer to c:\ im sure i have done this in the past with older versions of the 3.5 ide? just concat the file name as c:\data\My_Filename.csv. any ideas? cheers
Last updated: 2025-04-23

Post by mariacugnier on Equal Objects at Unstaged Changes - Git (Codesys Pro) ^{CODESYS Forge talk (Post)}
I'm having a serious issue with codesys-pro/git, because everytime I load my project I get around 40 unstaged changes with equal objects. If I only commit everything along with my real changes I strugle to locate them later. I've tried creating a new git repository, it didn't work. I've commited everything, it kept appearing. I've tried rolling back everything but it also didn't work. Does anyone know why this happens and how to manage it?
Last updated: 2025-05-20

Post by jvfred on Reading a negative number ^{CODESYS Forge talk (Post)}
I have a Codesys-based Eurotherm E+PLC400 connected to Codesys HMI SL for visualization. I am also bringing in several Pressure Indicators via the Ethernet. Everything works; however, the Pressure indicators sometimes read a negative value. When they do, the displayed value on the screen reads "65532." While I know what it represents, the customer freaks out and wants it to read "0" or a negative number. The value comes in as an integer, just in case that matters. Does anyone have any ideas?
Last updated: 2025-05-22

Post by nz-dave on Codesys 3.5.21 fails to copy file to USB ^{CODESYS Forge talk (Post)}
i had a similar problem trying to send files to C: on local computer. Ended up using Oscat ftp to transfer file with filezilla. i read there is an "write protection", possibly to do with windows, issue with sp19 and up. there are some config files in the codesys dir you can change, which may help. after i was able to transfer to local PC\downloads but not c: so went the ftp route. works well. https://forge.codesys.com/forge/talk/Runtime/thread/5cac1390b4/
Last updated: 2025-05-26

Post by lbouchard on CANOpen SIL2 error: UNSAFESTACK_NOT_OPERATIONAL ^{CODESYS Forge talk (Post)}
Update: I still have no idea what was causing my issues, but it went away as soon as I identified that another device on the CAN was generating a Sync message at 16#7F. Changing this to be on 16#80 made the problem go away. I have no idea why this solves the problem and would love to hear from anyone who knows why these two things might be related.
Last updated: 2025-05-26

Post by ggis on Manage Gateways between different CODESYS IDE versions ^{CODESYS Forge talk (Post)}
Hi, I'd like to share the list of gateways between different versions (and sandboxes) of Codesys IDE. I refer to the list that is managed in Device > Communication Settings (as described in https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_edt_device_communication_settings.html ) Can I export/import that list? Or is there a file that I can copy from one installation to another one? Thank you GG
Last updated: 2025-05-28

Post by wbj0t on Update project from SP20 to SP21 ^{CODESYS Forge talk (Post)}
Hello everyone. I have a problem: I installed new version of codesys IDE. When I try open project in this new version, I have many errors about Visu: rectalnge/button/frame/etc does not exist. How update properly project? 20+ pages of visu pages from 100+ frames and all visu elems looks like "Error image". It is not problem of SP20->SP21. Any update has problems from visu side.
Last updated: 2025-06-09

Post by josul on Web Client HTTPS Communication Issue ^{CODESYS Forge talk (Post)}
Thank you for the suggestion. There is a certificate created in the quarantine directory relating to the URL used for the webclient FB. This certificate should have been valid as it was created only the week before this problem was encountered. I investigated a separate location using the same https URL and it has 2 certificates in the same quarantine directory, 1 is created almost 200 days ago, the other over 100 days ago. There have been no similar problems encountered with these certs or https at all.
Last updated: 2025-06-09

Post by timothyzalusky on Missing Device Descriptions in Repository ^{CODESYS Forge talk (Post)}
After updating my Codesys to later versions, it seems my device repository no longer lists the proper runtime devices, nor ethernet adapters, or other previously installed device descriptions. What needs to be done here? Do I need to uninstall and do a clean install? I am now updating to SP21.1 to see if that fixes it. Any tips what I am doing wrong here are much appreciated. I don't see codesys control win, or have the ability to add an ethernet adapter in my project.
Last updated: 2025-06-12

Post by berkdan on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hey tk96 Thank you for your help. I have found the reason why fbreader stuck. It was not the program but it was the gcode itself. G21 command blocks the reader. And multiple G codes in a line also blocks the reader. My code was: N010 G21 G17 G90 -> Blocked the reader When i change it to: N010 G90 N020 G17 Then it worked. The only thing i did not get is why the reader did not thwor error. ErrorId was SMC_NO_ERROR. Anyway, it is now working. Thanks again.
Last updated: 2025-06-17

Post by nguyenkhoi on Omron R88D-KN08H-ETC with a raspberry on top... (over ethercat) ^{CODESYS Forge talk (Post)}
hi everyone, continuing the part about omron g5 axis and nx-ecc201 omron, but i have a problem with not being able to scan with "model with Z code suffix of omron china", it seems that the available softmotion file is not fully compatible mapping, often causing ethercat communication error DC distributed clock after every 10-12 hours of continuous running! omron driver: R88D-KN08H-ECT-Z
Last updated: 2025-07-01

Post by ryandmg on Web Client (HMI) Disconnects from Webvisu (Weidmuller u-OS) ^{CODESYS Forge talk (Post)}
Thanks So Much for the reply! Were using the Weidmuller UV66-ADV-10-CAP-W The HMI is pointed to the URL which is assigned through u-OS. Basically when you log into the controller's webserver via browser you can view the installed apps. One of which is the Codesys runtime. When you click on that it takes you to the visualization. That corresponding url is what the HMI is looking for. I apologize I don't have that on hand as I'm in the office right now. I don't think I tried connecting using the port you mentioned and https in lieu of the u_OS URL. I can certainly try. Out of the box the u-OS is set for HTTP. Since we're isolated I havent changed that yet. When this has happened while logged on via chrome on my laptop, simply refreshing brings the visualization right back. In the case of the HMI in kiosk mode, we power cycle the HMI to force a reconnect, log back in u-OS and the visualization is back.
Last updated: 2023-09-06

Post by timvh on Detect "Cancel" Press in FileOpenSave Dialog ^{CODESYS Forge talk (Post)}
Maybe there is a better way, but a long time ago I created a test application that worked like this: With a button I opened the dialog and I added a "Input configuration - OnDialogClosed" "Execute ST-Code" action to this same button which called the following Function when the dialog was closed: F_OnFileDialogClosed(pClientData); Below this Function which handled the result: // This function is called from the visualization when the dialog is closed. FUNCTION F_OnFileDialogClosed : BOOL VAR_INPUT pClientData : POINTER TO VisuElems.VisuStructClientData; END_VAR VAR dialogMan : VisuElems.IDialogManager; FileOpenCloseDialog : VisuElems.IVisualisationDialog; result : VisuElems.Visu_DialogResult; _sFileName : STRING(255); END_VAR // the DialogManager is provided via the implicitly available VisuManager dialogMan := VisuElems.g_VisuManager.GetDialogManager(); IF dialogMan <> 0 AND pClientData <> 0 THEN FileOpenCloseDialog := dialogMan.GetDialog('VisuDialogs.FileOpenSave'); // gets the FileOpenSave dialog IF FileOpenCloseDialog <> 0 THEN result := FileOpenCloseDialog.GetResult(); // gets the result (OK, Cancel) of the dialog IF result = VisuElems.Visu_DialogResult.OK THEN // Original code gvlFile.FileListProvider(); _sFileName := CONCAT(gvlFile.FileListProvider._stDirectory, gvlFile.FileListProvider.stFile); // do something with this file name... END_IF END_IF END_IF
Last updated: 2023-09-19

Post by rcaponi on Codesys Control RTE V3. Remote Control ^{CODESYS Forge talk (Post)}
Hello, I would like to have, if possible, some clarification on this function. That is, I would like to understand if it is useful for managing, fom my development PC, the RTE runtime executed on a remote control. This is what the help says: Remote PLC: Opens the Remote Configuration dialog. By enabling or disabling the Control remote PC, not local option, you determine whether a PLC is used that is on a remote or local PC. Accordingly, the menu commands Start PLC, Stop PLC, and PLC Configuration refer to the local PC or a PC reached on the network. For the remote PC, specify the Target PC address, Port number, and a Timeout value (in ms) for the connection (Remote Timeout [ms]). But does this mean that I also need to install the RTE runtime on my development PC? Is it possible to have some more information? Best regards Roberto Caponi
Last updated: 2023-09-22

Post by manuknecht on Persistence Manager does not save alphabetically first value ^{CODESYS Forge talk (Post)}
After some more digging I realized that I get an error on the PLC Logger saying PersistenceChannel: 150 (invalid type in data: SimpleLibrary). I suppose the issue could be found in the ConfigData, which is automatically generated and which looks like this: 1 9##83 SimpleLibrary#GVL.aMoreZeros.[1]#0#64512#15#0 <[2]#0#64520#15#0 <[3]#0#64528#15#0 <[4]#0#64536#15#0 <#0#64544#15#0 <[6]#0#64552#15#0 <<lrVar#0#64560#15#0 <strVar#0#64428#16#80 <uiDummy#0#64370#11#0 Perhaps the fact that the variable is stored within a library confused the compiler? I tried changing the PersistenceChannel parameters to xCompressTags := FALSE which changed the entry in the data file from _xCompressTags BOOL:TRUE _xCompressTags BOOL:FALSE but the actual content of the data file and also the config data did not change.
Last updated: 2023-10-17

Post by andrej on Write to File on soft PLC winV3x64 ^{CODESYS Forge talk (Post)}
Hello all, I would like to store some data in text file. I use the soft PLC Win V3x64, on Windows 10. I use the SysFile Library 3.5.17.0. If I store the file directly in the in the directory of the PLC i.e. in '/CODESYSControlWinV3x64/E1FA7ABE/PlcLogic/LogAU.txt' the file is correctly filled with the data. However, If I use an absolute path to a different directory no data is stored in the respective file. Despite the fact that the respective file exists and the Filehandler is correctly opened (see in picture _fdSysFHandle <> -1). // sFileName : STRING := 'LogAU.txt'; // STORES FILE IN ../CODESYSControlWinV3x64/../PlcLogic/LogAU.txt' sFileName : STRING := 'C/Temp/LogAU.txt'// DOES NOT WORK --------------------- // FILE DESCRIPTOR _fdSysFHandle := SysFile.SysFileOpen( szFile:= sFileName,am:= SysFile.AM_APPEND,pResult := ADR(_Result)); Does some have an idea where the problem is, resp. how I can get store a file in an arbitrary directory. Thanks a lot and kind regards Andreas
Last updated: 2023-10-24

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved EN: The Problem is that the Codesys Edge-Gateways have a License with a runtime of an half year, as long the Gateways are online they will self renew themselfs. In my Case the RevPi was more than a year offline and so the Edge-Gateway was not working anymore. The solution: I accessed a laptop that was directly connected to the RevPi. I installed the Codesys service tool and renewed the certificate manual. DE: Das Propblem ist das die Codesys Edge-Gatways eine Lizenz haben die nur ein halbes Jahr gültig ist. Solange das Gateway eine Internet verbindung hat aktualisiert sich das Zertifikat von alleine. In meinem Fall war das Gateway aber über ein Jahr offline und hat somit nicht mehr funktioniert. Die Lösung: Ich hab auf einen Laptop von Kunden mit TeamViewer zugegriffen, der Laptop wurde mit Kabel direkt mit RevPi verbunden. Codesys Service Tool installiert und dann das Gatewayzertifikat aktualisiert.
Last updated: 2023-10-26

Sort by relevance or date