Post by rkohser on Python Script for Finding "Last saved with" Value ^{CODESYS Forge talk (Post)}
Hi jkilburn, I have the exact same issue and thought I would search a solution on this forum. I see you did not get any answer, did you find a solution on how to extract the last saved version of codesys from the project file ? Roland
Last updated: 2024-01-29

Post by aconley on Static Code Analysis ^{CODESYS Forge talk (Post)}
I'm using CODESYS 3.5 SP16 Patch 6. I would like to incorporate static code analysis as part of our CI/CD pipeline. 1. Is there a way to execute the static code check from the command line or python script? 2. If you can't do it from the command line, is there a way to export the results from the application?
Last updated: 2024-02-15

Post by dhumphries on Attempting customizing menus fails in LADDER environment; due to free CODESYS version ? ^{CODESYS Forge talk (Post)}
You get fewer tools when you create a new POU and choose ladder diagram instead of ladder logic diagram. Create a new POU and select ladder logic diagram and you should find the additional tools you are looking for in the toolbox.
Last updated: 2024-03-11

Post by riku on Download CODESYS Scripting package ^{CODESYS Forge talk (Post)}
Hey there! Is it possible to download the "CODESYS Scripting" package outside of the "CODESYS Installer"? Or is there a alternative way to download the python files for the scripting engine? I want to setup a test environment to write test scripts and therefore want to have those python scripts for e.g. autocompletion. Thanks in advance!
Last updated: 2024-03-16

Post by thewizard8 on Raspberry PI4 Serial Port ^{CODESYS Forge talk (Post)}
Hi All, I finally figured out how to solve it. The only away that I got it to work was to define parity to None on modbus configuration, and now works like a charm. Just for the record I'm using the GPIO port pins (8,10) and a RS485 to ttl shield that you can find online. Thanks all for the support! Regards Ricardo
Last updated: 2024-03-19

Post by jinlee on V3.5 SP19 patch 2. Out of retain memory ^{CODESYS Forge talk (Post)}
Hi guys, I am quite new Codesys. Be patient to me. I am having a problem now. Please refer to the attached photo. Is there a way to increase the memory ? If no, what is the way to solve this problem ? My retain variable list is in one place. Please refer to the attached photo. Thank you very much.
Last updated: 2024-03-20

Post by clabaldo on Open dialog from ST previous to version 3.5.16 ^{CODESYS Forge talk (Post)}
I have found a similar topic but tried to run it in C3.5.16 and the visualization crashed. https://forge.codesys.com/forge/talk/Engineering/thread/8be0f6f14a/ My question is what is the easiest way to run a dialog from ST, as we need an external device to open the dialog so we cannot use the button on the display itself.
Last updated: 2024-03-22

Post by manuknecht on High Cycle Times for SoftMotion_PlanningTask when using AxisGroup ^{CODESYS Forge talk (Post)}
Hi, thanks a lot for the response. I did check all these parameters, but if the PlanningTask takes up to 60 ms, I can't increase the Buffer to such values. I contacted the Codesys support with a projectarchive. Let's see if they can help. Thanks again for your great support!
Last updated: 2024-03-22

Post by talhaali on Data logging from codesys to Microsoft Access ^{CODESYS Forge talk (Post)}
Hi, I want to write data from Codesys to Microsoft access and want to save it as mdb file. There is a way to store data in excel(CSV) file but instead of this, I want to save data in access (mdb) file. Does anyone have a solution? Thanks
Last updated: 2024-04-04

Post by talhaali on Data logging from codesys to Microsoft Access ^{CODESYS Forge talk (Post)}
Hi, I want to write data from Codesys to Microsoft access and want to save it as mdb file. There is a way to store data in excel(CSV) file but instead of this, I want to save data in access (mdb) file. Does anyone have a solution? Thanks
Last updated: 2024-04-04

Post by correo0269 on Problems with Raspberry Pi - IoDrvGPIO library ^{CODESYS Forge talk (Post)}
I am trying to create a new proyect using the Raspberry Pi 4.11.0.0 package with Codesys 3.5 SP20, I am able to communicate with the Raspberry and start the runtime application but when I create a new proyect I have these errors. When opening the library manager of the proyect the library of the IoDrvGPIO is used so I dont really know whats happening.
Last updated: 2024-04-05

Post by thomaspfrimmer on Can't import enums OnlineChangeOption / ResetOption ^{CODESYS Forge talk (Post)}
Hello Jusito, Can you share your final code, please ? I tried to implement a similar feature (going online, doing the reset and the start). But I get a timeout on the reset/start when I'm testing the script. If you got something working, I would appreciate to see it.
Last updated: 2024-04-11

Post by tomas111 on Black background when loading webvisu ^{CODESYS Forge talk (Post)}
Tell me, are there ways to remove the white background from the page loading? I want to change it to a black background. I think there are options with changing /home/codesys_root/PlcLogic/visu/webvisu.htm Perhaps you have already encountered a similar situation. I hope to find the answer to my question.
Last updated: 2024-04-17

Post by matthew on Persistence Manager Backup ^{CODESYS Forge talk (Post)}
Hi @eschwellinger How does the persistent manager files work on v20? I would Like to upgrade my v19 as I'm still having issues. Sometimes if there is a power cut CodeSys won't load the Persistence Manager files and I have to redownload to the PLC and then copy my backup persistent files and then start the application. I hope it's a lot more robust in v20
Last updated: 2024-04-23

Post by dhumphries on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
I have discovered a rounding error, either in Codesys or in my understanding of numbers. The attached ladder shows that when the up button is pressed the number increases by 0.1, when the down button is pressed number decreases by 0.1, after several button presses the number isn't equally divisible by 0.1. Have I discovered a bug or am I doing something wrong?
Last updated: 2024-04-27

Post by arslan on G Code Position Shifting ^{CODESYS Forge talk (Post)}
Dear friends, I have a issue that. I would like to give a zero offset of any axis in G-Code by G54 from PLC code as below demonstration. N000 G00 X0 Y0 Z0 N010 G54 (offset from PLC) N020 G01 X0 Y0 Z0 . . How to fix it! BR
Last updated: 2024-05-02

Post by fjgonzalez on Timer On Vijeo ^{CODESYS Forge talk (Post)}
Hi. I'm trying to show in Vijeo Designer a timer countdown. But I want to display the data in hour, minutes and seconds. I tried to change the data by converting in the Machine Expert but not able to succeed. Can you help me to find a solution? Regards, FG
Last updated: 2024-05-07

Post by kuegerls on CSV Utility SL ^{CODESYS Forge talk (Post)}
Hello, I want to read a CSV file using the CSV Utility SL library, but I encounter an 'invalid_handle' error during initialization. What could be the cause? For my test program see the screenshot. I have purchased a license, and it is also installed on my PLC. Thank you in advance. Best regards, Stefan.
Last updated: 2024-05-13

Post by felipemsgarcia on Generic EtherCAT slave ^{CODESYS Forge talk (Post)}
Hello, Without much info, I would assume that this is an optional object on the EtherCAT network and it's either disconnected or the address doesn't match. I would look into the devices manual or contact the manufacturer for further assistance. And, I would have posted a new topic instead of using a non related one... Cheers!
Last updated: 2024-05-16

Post by eschwellinger on connect IDE to plc that uses modem ppp ^{CODESYS Forge talk (Post)}
Which plc type is it? Easy connection is to install a Gateway on remote side - this is available for Windows and Linux devices Then just add a new Gateway in CODESYS (with the IP Adress of the remote device) -> then scan the plc via this new added Gateway
Last updated: 2024-05-21

Post by mp9876 on Problems with simulation in Window 10 ^{CODESYS Forge talk (Post)}
Hi Eschwellinger, sorry for so late reply but I found a solution back then; uninstall completely Codesys V3x64 and re-installed Codesys V3x32 to properly note the password I created and everything went ok. thank you for your suggestion and have a good day/evening Mike
Last updated: 2024-05-30

Post by rikkrt on Limited options ^{CODESYS Forge talk (Post)}
Hi! I was downloading codesys for a school project, but I cannot seem to find where and how to get the other programming languages. When I try to create a new project, I only get the option to program in structured text. *see problemcodesys.png Does anyone know where I can get the other languages? Thanks in advance, Rik
Last updated: 2024-06-06

Post by ym4649 on Is there a way to run --runscript in linux system? ^{CODESYS Forge talk (Post)}
Hi, Is there a way to run --runscript in linux system? This help only explains how I can run --runscript by using .exe. I would like to run script inside linux system and retrieve variables in codesys via CLI. https://help.codesys.com/webapp/_cds_starting_script_via_command_line;product=codesys;version=3.5.17.0
Last updated: 2024-06-26

Post by josealb2000 on EL6910 as a PROFIsafe F-Host in Codesys ^{CODESYS Forge talk (Post)}
Interested. I can see the EL6633 Profinet Controller can be added in Codesys to the EK1914 or EK1100, and then ProfiSafe devices can be added as the F-DI8/F-DQ3 ET200eco PN. Im unsure how to configure the telegram to the EL6910. Have you been able to make this configuration? EL6910 Manual shows a way but only using TwinSafe.
Last updated: 2025-10-23

Post by timvh on Persistent Retain Variables Not Visible in Online View (WAGO PFC100 + CODESYS) ^{CODESYS Forge talk (Post)}
It is a known issue. It only happens with CODESYS and Wago controllers and the Persistent Variables. It seems related to using 64 bit variables in the PV list (e.g. LREAL). Internally in the PLC everything works okay. It is just a monitoring issue.
Last updated: 2025-10-26

Sort by relevance or date