How to use __VARINFO within a function block to obtain the origin variable name? ^{CODESYS Forge talk (Thread)}
How to use __VARINFO within a function block to obtain the origin variable name?
Last updated: 2022-03-15

Runtime variable that indicates a user is online to the code ^{CODESYS Forge talk (Thread)}
Runtime variable that indicates a user is online to the code
Last updated: 2024-04-22

Post by critcho on WebVisu Numpad dialog - Dialogtitle not accepting string variable ^{CODESYS Forge talk (Post)}
I have a WebVisu page which is re-used for multiple types of gas; it displays the alarm thresholds etc. for one gas at a time. I have an array of structures holding the set-points for each of the gasses. I'm trying to change the dialog title for the value input pop-up (VisuDialogs.Numpad). The Dialogtitle is set to Gas_Alarms.HighAlarmActivationLevelDialog, which is a string(50): When the gas type is changed (page first loaded, or prev/next buttons), METHOD Gas_Alarms.Update_Display_Variables is called, to update the strings used for the dialog titles so it shows GasName High Alarm Activation Level (EngineeringUnits), e.g. CO2 High Alarm Activation Level (PPM): HighAlarmActivationLevelDialog := Insert(' High Alarm Activation Level ()', EngineeringUnits, 30); HighAlarmActivationLevelDialog := Insert(HighAlarmActivationLevelDialog, GasName, 0); (That's not where the problem is, I'm just explaining why I'm using a variable dialogue title.) The variables used are definitely strings, but i'm always getting the error: "The type of the dialog title must be either STRING or WSTRING". I've tried moving HighAlarmActivationLevelDialog etc. to the GVL and also changing them to WSTRING, I even tried adding them to the structure array, but I always get the same error. Clearing the dialog title for that element removes the error - so I'm confident it's not a phantom error caused by something else. But I should be able to add these titles, can't just nuke them all to make it work. The MinVal and MaxVal for the Numpad are called from the array, e.g. GVL.Gas_Alarm_Configs[0].ScaledValueMIN, they are not getting an error. I am using array indexes 1 - 5 for the gasses, when I load the form or change gas, I copy the selected index to index 0 of the array, and values from Gas_Alarm_Configs[0].[ALL] are displayed on the page. When they hit save, I copy Gas_Alarm_Configs[0].[ALL] to Gas_Alarm_Configs[CurrentGasIndex].[ALL]. (ALL just means every element, I can't figure out how to display an asterix in this question... :) ) I've searched online for variable title dialog, but not found anything to help. Thanks for your help!
Last updated: 2025-05-29

The VAR_INPUT stDirEntry for the function SysDirRead ^{CODESYS Forge talk (Thread)}
The VAR_INPUT stDirEntry for the function SysDirRead
Last updated: 2008-06-24

Where can get the help for the library SysLibTargetVisu.lib ^{CODESYS Forge talk (Thread)}
Where can get the help for the library SysLibTargetVisu.lib
Last updated: 2008-02-04

Setting of the language for the installer ^{CODESYS Forge talk (Thread)}
Setting of the language for the installer
Last updated: 2013-02-06

Post by tvm on Passing properties as VAR_IN_OUT variables. ^{CODESYS Forge talk (Post)}
Use a VAR_INPUT for properties. The reason for the error is that you can't get a reference to a property. Using a VAR_INPUT will copy the property to an input variable.
Last updated: 2025-03-06

Post by timvh on Unable to select VisuDialogs.Numpad in Open Dialog input configuration ^{CODESYS Forge talk (Post)}
You should not use the "open dialog" to change the value. Instead use the input configuration "Write Variable" to change a variable value in the visualization. in the setting of this input command, you can choose the Input type (select dialog).
Last updated: 2025-07-23

Post by pistola on How to change font and font color rectangle/or related object ^{CODESYS Forge talk (Post)}
Here is the help sections for visual elements rectangle. https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_elem_rectangle.html Under "Font Variable" there is "Color" which is a Dword, you can make a variable that changes colour within your code to the color needed. Note the format for the Dword variable is: colorVariable := 16#TTRRGGBB Where: TT = Transparency 00-FF RE = Red 00-FF GG = Green 00-FF BB = Blue 00-FF https://content.helpme-codesys.com/en/CODESYS%20Visualization/_visu_animate_color.html
Last updated: 2025-03-17

Post by griinde on display values with frames ^{CODESYS Forge talk (Post)}
i want to make a frame for use multiple places for showing pressure and temperature. ive tried to decleare a variable in the frame config, if i put a fixed value in the value text field it show correct until i simulate. and if i point to a variable i gvl it show the name of the variable, and when i simulate it shows rValue. is there a way to do what i want?
Last updated: 2025-08-16

Post by trusty-squire on Confused by dwIpoTime input for SMC_Interpolator ^{CODESYS Forge talk (Post)}
Hi, Learning Codesys CNC, and I am confused by the dwIpoTime parameter. I have a basic demo application, using SMC_Interpolator feeding into SMC_TRAFO_Gantry2Tool2, which then sets the position of the x/y SM_Drive_Virtual axis. I also have a C axis which revolves the tool, which is controlled using a simple tangential angle calculation SMC_CalcDirectionFromVector. The GCode I'm using has feed/accel set at 500. The axis configuration limits are well above that (2000). What's strange is that, when I run the simulation, the feed speed changes drastically when I update the variable dwIpoTime. The larger the number, the faster it moves. What's going on here? The documentation only says "This variable has to be set for each call. It represents the cycle time in μsec." Why does it change the feed speed I'm seeing the in simulation? What is a good number to use? The example I was looking at set it at 5000. Screenshot attached.
Last updated: 2024-07-18

Post by mubeta on Strange problem with the ‘MC_SetPosition’ function ^{CODESYS Forge talk (Post)}
CoDeSys 3.5.19.7 Target Berghof MX6 In a simple SoftMotion programme with two stepperless modular axes from CMZ, one is simply controlled in speed, but a spot must perform a positioning. I use the function MC_SetPosition() both to reference the axis at power-up and also to correct the actual position to a fixed machine reference detected with proximity. The function has only one instance and I actually use a booelan variable to control the ‘Execute’ input. Well, I cannot correctly change the axis position on the fly if it is running at high speed. The servomotor works in a speed range between 0°/s and 720°/s, (gearbox output with a 1:6 ratio). As long as the servomotor is operating at speeds below about 400 °/s, the function is able to correct the position correctly even when forcing values far apart, but at high speeds, from 400 °/s upwards, the correction no longer takes place. For example, trying to correct the position of 280° into 300° with absolute mode, the axis that is moving at speed actually shifts the position by a few degrees, not the expected 20. I don't understand why with the servo drive running slowly the position shift occurs correctly, while increasing in speed it no longer works.
Last updated: 2025-01-09

the parameter for method "create_dut" ^{CODESYS Forge talk (Thread)}
the parameter for method "create_dut"
Last updated: 2017-12-07

Populate Array using the FOR instruction ^{CODESYS Forge talk (Thread)}
Populate Array using the FOR instruction
Last updated: 2021-04-14

How disable long touch press as right-mouse-click on Raspberry Pi touchscreen ^{CODESYS Forge talk (Thread)}
How disable long touch press as right-mouse-click on Raspberry Pi touchscreen
Last updated: 2022-05-16

CNC / G-Code streaming processing ( to start quickly in long G-Code File ) ^{CODESYS Forge talk (Thread)}
CNC / G-Code streaming processing ( to start quickly in long G-Code File )
Last updated: 2024-05-03

Post by dnordenberg on BOOL variable in OPC UA and modbus simultaneously ^{CODESYS Forge talk (Post)}
How can I have an BOOL variable that is read/write in both modbus TCP server and from OPC UA at the same time? Variables with %MX.n %QX.n addressing which is used for BOOL/coils in modbus server is not allowed in OPC UA symbol list on Schneider M251 controllers. I have already asked on Schneiders forum but there are not a lot of codesys experts over there :( So OPC symbols can't have a address and the modbus TCP server needs a address. So how should I do it then? It seems like an impossible combination. Since I want read/write access from both ways I can't just simply make a second variable and assign it the value of another since it would be a one way assignment. I also tried using VAR_CONFIG which then makes the address syntax %Q or %M in my main variable list and that fools OPC UA Symbol Configuration to allow it and then I add the complete %MX.n address of it in the VAR_CONFIG list. This semi works, I can toggle the BOOL from modbus but the OPC UA symbol seems to be read only. It displays symbol status but nothing happens when I toogle it. I think I need another way to have the variables and symbols pointing to the same bits in memory... My plan B is to write a BOOL array compare FB that saves a history bit from previous cycle and if that does not match current status at next cycle for either the OPC symbol or the modbus variable then it copies the new status over to the other. Maybe ugly but it's like my last alternative. Kind regards David
Last updated: 2025-07-14

Post by nilo on How to get the system time in milliseconds? ^{CODESYS Forge talk (Post)}
Hi, thanks for sharing your final results. may I ask why are you diving by 10?
Last updated: 2024-02-28

Post by ph0010421 on Help with __SYSTEM.VAR_INFO ^{CODESYS Forge talk (Post)}
hi all I have a FB with IN/OUT variable. Inside the FB, I want to get the address of the IN/OUT variable. If I use __SYSTEM.VAR_INFO, I get the address of the FB copy rather than 'external' variable. VAR_IN_OUT MyVar: bool; END_VAR VAR Info: __SYSTEM.VAR_INFO; END_VAR Info := __VARINFO(MyVar); This give me the address of MyVar but I actually want the address of the variable passed to MyVar Any clues please?? thanks, ph
Last updated: 2025-01-24

Post by comingback4u on Memory Address Overlap ^{CODESYS Forge talk (Post)}
Hello, We use a controller that comes with a bunch of predefined faults. These faults are considered active and historic. They are a 32 byte array but only take up 26 bytes of data. Because of this the historic faults start at address 26 instead of 31. Active faults variable take up address location 0 to 31. Historic faults variable take up address location 26 to 57. Because of this overlap I get an error that these overlap and it wont allow me to download to my controller. This isn't an issue in 3.5.5.4 but becomes an issue in newer version. Is there a way to turn this off? If I change the address location, the historic faults then become broken without doing some manipulation in the code. The software will build just fine. Thank you for your time.
Last updated: 2024-03-07

Post by mubeta on STRUCT AT %MW1000 ^{CODESYS Forge talk (Post)}
This is normal and correct since in CoDeSys static addressing of variables uses the IEC method. A LONG tag has the size of 8 bytes, so %ML0 coincides with %MB0 ... %MB7; %ML1000 with %MB8000 ... %MB8007. (Similar reason for word and other formats). Also the reason the compiler won't let you map the structure to a %MW depends on the fact that the individual base elements are manipulated to 64 bits regardless of the smaller size. That said, it makes me strange that you cannot write a parser without making use of static memory allocation.
Last updated: 2024-08-13

Post by joelwright24 on codesys sp20 opcua not working ^{CODESYS Forge talk (Post)}
I also had this problem connected CODESYS to UAExpert for the first time. In the device, I need to allow anonyomous log in. Follow steps 14 - 17 of the following tutorial: https://docs.factoryio.com/tutorials/codesys/setting-up/codesys-opc-ua-sp17/#creating-the-project
Last updated: 2024-09-11

Post by pr0schwein on Driving the slave axis across master's zero point - caming ^{CODESYS Forge talk (Post)}
Is there a way to move the slave axis across the zero point of the master axis with variable start and stop points? For example: Slave start at 270° and end at 50°. thanks :)
Last updated: 2024-01-18

Post by matt-s on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
I know, that is not the issue though. The issue is the HMI_Blower_Auto_PB variable not changing to false. I do not have the IO modules plugged in yet, that is why there are NaN values for those variables. That should not affect this.
Last updated: 2024-01-25

Post by simotion on Variable indicating axis pending gearing or camming ^{CODESYS Forge talk (Post)}
Is there a variable indicating that a gearing or camming operation is pending? For instance MC_Gearin has beeen triggered, but starting point of master axis to start the sychronisation movement is not reached yet, so the slave axis is just waiting for this. I should be able to differ between a pending and active gearing or camming
Last updated: 2023-11-28

Sort by relevance or date