Post by rmaas on Strange Behavior on Raspberry Pi
CODESYS Forge
talk
(Post)
Hello, what you are seeing is not strange behavior. The problem is that everyting is happening in the same program cycle. After the variable Stepnumber is changed from 10 to 20 for example then you want the program to wait with the next EQ until the next program cycle. Else every EQ will be be true because in every line the variable Stepnumber is increased. When the program arrives (still in the same cycle) at the line with the timer, the Stepnumber has been increased to 30 in the meantime and the timer will allway be ON because even though the variable is written to 10 in this line in the next cycle it starts with 10 and will be 30 again before reaching the timer in line 8. Not very good at explaining stuff but i hope you get the problem. See screenshot below for an example of one way you could solve this...
Last updated: 2024-06-18
Post by cmj-icsys on Custom configure tab in device editor
CODESYS Forge
talk
(Post)
Hi everyone, I’m developing a custom CODESYS I/O driver for my company’s device, and I’ve been studying the example projects in CODESYS V3.5 SP20 Patch 5. In the IOMappingExample.project, I noticed that EtherCAT devices provide additional configuration tabs in the Device Editor, such as General, Process Data, etc. However, for custom I/O driver examples (based on IoDrv), the Device Editor only shows the default tabs like <devicename> I/O Mapping or <devicename> Parameters.</devicename></devicename> I’d like to create custom tabs or configuration pages in the Device Editor (e.g., “General Settings”, “Communication”, etc.) to allow users to configure parameters in a more structured way. Could anyone explain: How to define and register custom tabs or UI pages in the Device Editor? What tools or SDKs are needed to create UI elements such as combo boxes or check boxes? How to bind those UI controls to device parameters defined in the XML (device description)? Any example, SDK reference, or documentation link would be really helpful. Thanks in advance!
Last updated: 2025-10-20
Post by jonasz on Deploy LicenseServer for Linux SL
CODESYS Forge
talk
(Post)
Good morning, I'm digging into this topic because I'm curious about resolving my problem in a test environment. In my previous message, I asked about the CODESYS Safe Timeprovider SL package (4.18.0.0), which I saw in the illustration. I noticed that it runs as a service. I am asking about this because from the perspective of an "ordinary" user, this service provides easier access to the settings of the time provider's operating parameters. The basic time provider configuration is outlined at https://content.helpme-codesys.com/en/CODESYS%20Control/_rtsl_virtual_safe_time_provider.html. Why my questions? They stem from my specific case, which is experiencing timeout issues. I know that my environment is currently only a test environment. I'm assuming a real-world scenario in which I won't be able to achieve a better result with my configuration, and I will ultimately need to increase the time provider's cycle time. By running the time provider service, I can easily influence the time provider's operation and thus eliminate the problem. I know, I know, safety systems are not life-enhancing extras.
Last updated: 2025-11-19
Post by harryc on Soft Container License issue with ARM64 Linux
CODESYS Forge
talk
(Post)
Hi, We are working to provide our customers with CODESYS operation on our hardware product ( https://elprotech.com/product/el-qe-e-quantum-edge-series/ ). I'm trying to enable a CODESYS license (Soft container) on our product running ARM64 linux. This problem am having looks similar to here: https://forge.codesys.com/forge/talk/Runtime/thread/6d29b6b4de/ and here: https://forge.codesys.com/forge/talk/Runtime/thread/a2d0c63375/; but I am not running docker, and I am not re-installing a license. This is first time install. I have CODESYS Control SL running on my device, as well as CodeMeter. I purchased a license, and installed it to the CODESYS Development system, (Tools >> License Repository) then tried to install to the device (Tools >> License Manager >> o Device >> o Soft container >> Remote [0001] >> OK. This gives me the "License Manager - Overview" dialog, and the message "Licensing info not available. There is no dongle attached to the device." Below shows the running applications, installed packages, and current content of /var/opt/codesys Also attached screenshots of the Development software as I go through the steps to install the license. # # ps | grep -e "code" -e "CodeMeter" 1391 daemon /usr/sbin/CodeMeterLin 1407 root /opt/codesys/bin/codesyscontrol.bin /etc/codesyscontrol/CODESYSControl.cfg 1442 root /opt/codesysedge/bin/codesysedge.bin /etc/codesysedge/Gateway.cfg 29229 root grep -e code -e CodeMeter # dpkg -l Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==============-=============-============-============================================================================================== ii codemeter-lite 8.20.6539.500 arm64 WIBU CodeMeter minimal runtime ii codesyscontrol 4.14.0.0 arm64 codesyscontrol based on SDK 3.5.20.40 , from Fri Nov 29 08:35:37 CET 2024 [265], Release build ii codesysedge 4.14.0.0 arm64 codesysedge based on SDK 3.5.20.40 , from Fri Nov 29 08:34:19 CET 2024 [265], Release build # ls -la /var/opt/codesys total 208 drwxr-xr-x 6 root root 4096 Nov 7 05:31 . drwxr-xr-x 1 root root 4096 Nov 6 08:33 .. -rw-r--r-- 1 root root 23515 Nov 7 07:26 .Audit.log -rw-r--r-- 1 root root 160 Nov 7 05:31 .GroupDatabase.csv -rw-r--r-- 1 root root 160 Nov 7 04:37 .GroupDatabase.csv_ -rw-r--r-- 1 root root 20736 Nov 29 2024 .SoftContainer_CmRuntime.wbb -rw-r--r-- 1 root root 1982 Nov 29 2024 .UFC_SoftContainer_CmRuntime.WibuCmLif -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv_ -rw-r--r-- 1 root root 11807 Nov 7 05:30 .UserMgmtRightsDB.csv drwxr-xr-x 6 root root 4096 Nov 6 08:30 .pki drwxr-xr-x 3 root root 4096 Nov 6 08:30 OPCUAServer drwxr-xr-x 7 root root 4096 Nov 6 08:30 PlcLogic -rw-r--r-- 1 root root 13 Nov 6 08:30 SysFileMap.cfg -rw-r--r-- 1 root root 2640 Nov 29 2024 bacstac.ini drwxr-xr-x 4 root root 4096 Nov 6 08:30 cert -rw-r--r-- 1 root root 94105 Nov 7 07:25 codesyscontrol.log # # uname -a Linux Remote 6.1.22 #5 SMP PREEMPT Tue Nov 18 11:35:46 AEST 2025 aarch64 GNU/Linux #
Last updated: 2025-12-04
Post by honorzen543 on Kupongkod Temu [acu729640] 1,000kr Kupong För Befintlig Kund
CODESYS Forge
talk
(Post)
Kupongkod Temu [acu729640] 1,000kr Kupong För Befintlig Kund Introduktion Temu är en plattform där du kan hitta fantastiska erbjudanden och produkter till rabatterade priser. Med vår Temu coupon code 1,000kr off kan du spara ännu mer pengar på dina inköp. Vare sig du är ny kund eller en trogen användare, är det här koden för dig. Vår exklusiva Temu kupongkod [acu729640] erbjuder maximala fördelar för våra användare i Sverige. Denna kod är utformad för att ge högsta möjliga besparingar för just er. Missa inte denna chans att spara stort på dina favoritprodukter. Genom att använda vår Temu coupon 1,000kr off och Temu 100 off coupon code, lovar vi att din shoppingupplevelse blir både roligare och billigare. Oavsett om du handlar kläder, elektronik, eller hushållsartiklar, är detta erbjudandet som kan göra en verklig skillnad. Vad Är Kupongkoden För Temu 1,000kr Off? Både nya och befintliga kunder kan dra nytta av fantastiska förmåner genom att använda vår Temu coupon 1,000kr off på Temus app och webbplats. Denna 1,000kr off Temu coupon gör det möjligt för alla att få mer för sina pengar. [acu729640]: Få en fast rabatt på 1,000kr på ditt köp. [acu729640]: Upptäck ett kupongpaket på 1,000kr för flera användningar. [acu729640]: Njut av en fast rabatt på 1,000kr för nya kunder. [acu729640]: Extra 1,000kr promo-kod för befintliga kunder. [acu729640]: Exklusiv 1,000kr kupong för användare i "Sverige". Temu Kupongkod 1,000kr Off För Nya Användare Nya användare får de högsta fördelarna genom att använda vår kupongkod på Temus app. Vår Temu coupon “Sweden” 1,000kr off och Temu 1,000kr off for new users “Sweden” är speciellt utformade för att välkomna våra nya kunder. [acu729640]: Fast 1,000kr rabatt för nya användare. [acu729640]: Ett kupongpaket på 1,000kr för nya kunder. [acu729640]: Upp till 1,000kr kupongpaket för flera användningar. [acu729640]: Fri frakt över hela "Sverige". [acu729640]: Extra 30% rabatt på valfritt köp för första gången användare. Hur Man Löst In Temu 1,000kr Off Kupongkoden För Nya Kunder? För att använda Temu 1,000kr off och vår Temu coupon code “Sweden” 1,000kr off for new users, följ dessa enkla steg: Skapa ett nytt konto på Temus webbplats eller app. Välj dina önskade produkter och lägg dem i varukorgen. Gå till kassan och ange koden [acu729640] i rabattkodssektionen. Klicka på "Använd" för att se rabatten tillämpad på ditt köp. Slutför din beställning och njut av besparingen! Temu Kupongkod 1,000kr Off För Befintliga Användare Även befintliga användare kan ta del av förmåner genom att utnyttja våra kupongkoder på Temu-appen. Vår Temu 100 off coupon code och Temu coupon code “Sweden” för befintliga kunder erbjuder fantastiska rabatter. [acu729640]: 1,000kr extra rabatt för befintliga Temu-användare. [acu729640]: Ett kupongpaket på 1,000kr för flera inköp. [acu729640]: Gratis present med expressfrakt över hela "Sverige". [acu729640]: Extra 30% rabatt ovanpå befintlig rabatt. [acu729640]: Fri frakt till "Sverige". Hur Man Använder Temu Kupongkoden 1,000kr Off För Befintliga Kunder? För att använda Temu coupon code 100 euro off och Temu discount code “Sweden” för befintliga användare, följ dessa steg: Logga in på ditt befintliga Temu-konto. Välj dina favoritartiklar och lägg dem i kundvagnen. Ange koden [acu729640] i rabattsektionen vid kassan. Klicka på "Använd" och se rabatten tillämpas. Fortsätt till betalningen och njut av de extra besparingarna! Hur Man Hittar Temu Kupongkoden 1,000kr Off? Du kan enkelt hitta och utnyttja Temu coupon code 1,000kr off first order genom att registrera dig för Temus nyhetsbrev. Följ även Temus sociala mediesidor för att få de senaste Temu coupons “Sweden”. Besök dessutom betrodda svenska kupongsidor för att upptäcka de senaste och fungerande Temu-kupongkoderna. Hur Fungerar Temu 1,000kr Off “Sweden” Kuponger? Vår Temu coupon code 1,000kr off first time user och Temu coupon code “Sweden” ger dig direkta besparingar. När du anger koden under kassan, dras rabatten automatiskt av från din totala summa. Kupongen gäller för både nya och befintliga kunder och kan användas flera gånger. Hur Man Tjänar Kuponger I Temu “Sweden” Som Ny Kund? Du kan tjäna kuponger med Temu coupon code “Sweden” 1,000kr off och Temu 100 off coupon code first order genom att bli medlem i Temus belöningsprogram. Varje köp du gör genererar poäng som sedan kan bytas ut mot rabatter och kuponger. Håll också koll på speciella kampanjer som erbjuder extra poäng för specifika aktiviteter. Vilka Är Fördelarna Med Att Använda Temu Kuponger “Sweden”? Genom att använda vår Temu 1,000kr off coupon code legit och coupon code for Temu 100 off kan du njuta av många fördelar: 1,000kr rabatt på första ordern. 1,000kr kupongpaket för flera användningar. 70% rabatt på populära artiklar. Extra 30% rabatt för befintliga Temu-kunder. Upp till 90% rabatt på utvalda artiklar. Gratis present för nya användare. Fri leverans i hela Europa. Temu Gratis Gåva “Sweden” Och Speciell Rabatt För Nya Och Befintliga Användare Med Temu 1,000kr off coupon code och 1,000kr off Temu coupon code “Sweden”, finns det många fördelar att hämta. Dessa kupongkoder gör varje shoppingupplevelse minnesvärd. [acu729640]: 1,000kr rabatt på första beställningen. [acu729640]: Extra 30% rabatt på alla artiklar. [acu729640]: Gratis gåva för nya Temu-användare. [acu729640]: Upp till 70% rabatt på alla artiklar i Temus app. [acu729640]: Gratis gåva med fri frakt i "Sverige". För- Och Nackdelar Med Att Använda Temu Kupongkod 1,000kr Off Användningen av Temu coupon “Sweden” 1,000kr off code och Temu free coupon code “Sweden” 100 off har följande för- och nackdelar: Fördelar: Enkel att använda. Stor rabatt på första köpet. Kombinerbar med andra erbjudanden. Tillgänglig för alla användare i Sverige. Inga extra avgifter. Nackdelar: Begränsad till Temus plattform. Kan inte överföras till andra konton. Gäller endast vissa produkter. Villkor För Temu 1,000kr Off Kupongkod 2024 Med vår Temu coupon code 1,000kr off free shipping “Sweden” och Temu coupon code 1,000kr off reddit får du en problemfri shoppingupplevelse. Våra kupongkoder har inget utgångsdatum. Koderna är giltiga för både nya och befintliga användare i "Sverige". Inga minimiköp krävs för att använda våra kuponger. Gäller endast på Temus produkter. Kombinerbar med andra kampanjer och rabatter. Final Note Sammanfattningsvis erbjuder vårt Temu coupon code 1,000kr off en utmärkt möjlighet för alla att spara pengar och få mer värde i sina inköp. Oavsett din shoppingvana, har vi en lösning för dig. Med vår Temu 1,000kr off coupon, sätter vi dig i fokus och hjälper dig att göra det mesta av dina shoppingupplevelser. Missa inte chansen att utnyttja dessa fantastiska rabatter! FAQs Of Temu 1,000kr Off Coupon 1. Kan jag använda koden [acu729640] flera gånger? Ja, du kan använda koden [acu729640] flera gånger för att få rabatt på dina inköp. Detta gör att du kan maximera dina besparingar varje gång du handlar. Är Temu 1,000kr off coupon tillgänglig för alla produkter? Kupongen gäller för de flesta produkter på Temus plattform. Dock kan vissa varor vara undantagna, så kontrollera alltid villkoren för varje specifik artikel. Hur registrerar jag mig för Temus nyhetsbrev? Att registrera sig för Temus nyhetsbrev är enkelt. Besök Temus webbplats och fyll i din e-postadress i nyhetsbrevssektionen för att börja motta exklusiva erbjudanden och kupongkoder. Kan jag kombinera Temu coupon “Sweden” 1,000kr off code med andra rabatter? Ja, i de flesta fall kan du kombinera vår kupongkod med andra rabatter, vilket ger dig ytterligare besparingar. Kontrollera dock alltid de specifika villkoren för att vara säker. Hur får jag gratis frakt med Temu-kupongen? För att få gratis frakt, använd Temu coupon code “Sweden” 1,000kr off under kassan. Rabatten kommer att inkludera fri frakt för dina kvalificerande inköp.
Last updated: 2024-10-26
Post by honorzen543 on Desconto Temu [acu729640] 100€ Cupão Novos Usuários
CODESYS Forge
talk
(Post)
Descubra como o Temu coupon code ÂŁ100 off pode transformar suas compras online na plataforma Temu. Para os habitantes de Portugal, esta Ă© uma oportunidade imperdĂvel para economizar significativamente em suas compras favoritas. O cĂłdigo promocional [acu729640] oferecerá os máximos benefĂcios para os usuários em Portugal. Garantimos que este cĂłdigo proporcionará uma experiĂŞncia de compra econĂ´mica e satisfatĂłria. Com o Temu coupon ÂŁ100 off e o Temu 100 off coupon code, vocĂŞ terá acesso a descontos incrĂveis que farĂŁo a diferença no seu orçamento mensal. Aproveite esta chance para explorar tudo o que Temu tem a oferecer. Qual Ă© o CĂłdigo de Cupom para Temu ÂŁ100 Off? Os clientes novos e existentes tĂŞm a chance de obter benefĂcios incrĂveis utilizando nosso Temu coupon ÂŁ100 off no site e app da Temu. Aqui estĂŁo algumas vantagens especĂficas associadas ao uso deste cĂłdigo: [acu729640]: Desconto direto de ÂŁ100 em uma Ăşnica compra. [acu729640]: Pacote de cupons de ÂŁ100 para usos mĂşltiplos. [acu729640]: Desconto de ÂŁ100 para novos clientes. [acu729640]: CĂłdigo promocional de ÂŁ100 extra para clientes existentes. [acu729640]: Cupom de ÂŁ100 para usuários em “Portugal”. CĂłdigo de Cupom Temu 100€ Off para Novos Usuários Os novos usuários podem obter os maiores benefĂcios usando nosso cĂłdigo promocional no aplicativo Temu. Veja como o Temu coupon “Portugal” 100€ off e o Temu 100€ off for new users “Portugal” podem beneficiar vocĂŞ: [acu729640]: Desconto direto de ÂŁ100 para novos usuários. [acu729640]: Pacote de cupons de ÂŁ100 para novos clientes. [acu729640]: Pacote de cupons de atĂ© ÂŁ100 para usos mĂşltiplos. [acu729640]: Frete grátis por todo “Portugal”. [acu729640]: Desconto extra de 30% em qualquer compra para usuários de primeira viagem. Como Resgatar o CĂłdigo de Cupom Temu 100€ Off para Novos Clientes? Para aproveitar o Temu 100€ off e o Temu coupon code “Portugal” 100€ off for new users, siga este guia passo a passo: Baixe o aplicativo Temu e crie uma nova conta. Adicione produtos ao seu carrinho de compras. No checkout, insira o cĂłdigo [acu729640]. Confirme o desconto aplicado e finalize a compra. CĂłdigo de Cupom Temu 100€ Off para Usuários Existentes Usuários existentes tambĂ©m podem se beneficiar de nossos cĂłdigos de cupom no aplicativo Temu. Veja como o Temu 100 off coupon code e o Temu coupon code “Portugal” para existing customers podem ser Ăşteis: [acu729640]: Desconto extra de 100€ para usuários existentes da Temu. [acu729640]: Pacote de cupons de 100€ para compras mĂşltiplas. [acu729640]: Presente grátis com envio expresso em todo “Portugal”. [acu729640]: Desconto extra de 30% em cima do desconto existente. [acu729640]: Frete grátis para “Portugal”. Como Usar o CĂłdigo de Cupom Temu 100€ Off para Clientes Existentes? Para utilizar o Temu coupon code 100 euro off e o Temu discount code “Portugal” for existing users, siga os passos a seguir: Acesse o aplicativo Temu com sua conta existente. Escolha os produtos desejados e adicione-os ao carrinho. No checkout, insira o cĂłdigo [acu729640]. Finalize sua compra apĂłs verificar o desconto. Como Encontrar o CĂłdigo de Cupom Temu 100€ Off? Para achar o Temu coupon code 100€ off first order e os latest Temu coupons “Portugal”, vocĂŞ pode se inscrever na newsletter da Temu. AlĂ©m disso, siga as páginas de mĂdia social da Temu para estar sempre atualizado com os Ăşltimos cupons e promoções. Visite sites confiáveis de cupons em “Portugal” para encontrar os cĂłdigos mais recentes e funcionais. Como Funcionam os Cupons Temu 100€ Off “Portugal”? Os Temu coupon code 100€ off first time user e “Temu coupon code“Portugal”” oferecem descontos diretos em suas compras. Basta inserir o cĂłdigo promocional durante o checkout e o desconto será aplicado automaticamente, reduzindo o valor total da sua compra. É uma maneira simples e eficaz de economizar dinheiro e aproveitar mais suas compras na Temu. Como Ganhar Cupons na Temu “Portugal” Como Novo Cliente? Para obter o Temu coupon code “Portugal” 100€ off e o “Temu 100 off coupon code first order,” basta se cadastrar como novo cliente na plataforma Temu. Automáticamente receberá ofertas e cupons exclusivos, que podem incluir descontos diretos, frete grátis e promoções especiais, ajudando a maximizar suas economias. Quais SĂŁo as Vantagens de Usar Cupons Temu “Portugal”? Usar nossos cĂłdigos de cupom na Temu oferece numerosas vantagens, como: Temu 100€ off coupon code legit: Desconto de 100€ na primeira compra. Coupon code for Temu 100 off: Pacote de cupons de 100€ para usos mĂşltiplos. 70% de desconto em itens populares. Desconto extra de 30% para clientes existentes. AtĂ© 90% de desconto em itens selecionados. Presente grátis para novos usuários. Entrega gratuita por toda a Europa. Temu Presente Grátis “Portugal” e Desconto Especial para Novos e Existentes Usuários Existem mĂşltiplos benefĂcios ao usar nossos cĂłdigos de cupom Temu, incluindo o Temu 100€ off coupon code e o 100€ off Temu coupon code “Portugal”: [acu729640]: Desconto de 100€ na primeira compra. [acu729640]: Extra 30% de desconto em qualquer item. [acu729640]: Presente grátis para novos usuários da Temu. [acu729640]: AtĂ© 70% de desconto em qualquer item no aplicativo Temu. [acu729640]: Presente grátis com frete grátis em “Portugal”. PrĂłs e Contras de Usar o CĂłdigo de Cupom Temu 100€ Off Aqui estĂŁo alguns Temu coupon “Portugal” 100€ off code e Temu free coupon code “Portugal” 100 off: PrĂłs: Oferece economia instantânea de 100€. Válido para novos e existentes usuários. Frete grátis incluĂdo. Sem requisitos de compra mĂnima. Expira apenas quando utilizado. Contras: DisponĂvel apenas para compras na Temu. Necessário inserir o cĂłdigo manualmente. Válido apenas para usuários em Portugal. Termos e Condições do Cupom Temu 100€ Off em 2024 Alguns termos e condições para o uso do Temu coupon code 100€ off free shipping “Portugal” e “Temu coupon code 100€ off reddit” incluem: Sem prazo de validade, use a qualquer momento. Válido para novos e existentes usuários em “Portugal”. Nenhum requisito de compra mĂnima. Cupom se aplica apenas atravĂ©s do aplicativo Temu. Combina-se com outras promoções existentes. Nota Final Resumindo, o Temu coupon code 100€ off Ă© uma excelente oportunidade para economizar em suas compras favoritas. NĂŁo perca a chance de experimentar essas ofertas exclusivas. Com o Temu 100€ off coupon, suas compras na Temu serĂŁo nĂŁo apenas mais econĂ´mica, mas tambĂ©m mais prazerosas. Experimente agora e desfrute das economias! FAQ do Cupom Temu 100€ Off O que Ă© o Temu coupon code 100€ off? É um cĂłdigo promocional que oferece um desconto de 100€ em suas compras na Temu, disponĂvel para novos e existentes usuários em Portugal. Como posso usar o cĂłdigo [acu729640]? Basta inserir o cĂłdigo no checkout do aplicativo Temu para obter o desconto aplicado instantaneamente. O Temu coupon code 100€ off Ă© válido para todos os produtos? Sim, o cupom pode ser aplicado na maioria dos produtos, mas algumas restrições podem se aplicar a itens especĂficos. Posso usar o cĂłdigo Temu 100€ off mais de uma vez? Dependendo da promoção ativa, alguns cĂłdigos podem ser utilizados para usos mĂşltiplos, conforme mencionado em nosso site. O que acontece se eu esquecer de aplicar o cĂłdigo de cupom na compra? O desconto nĂŁo será aplicado apĂłs a finalização da compra. Certifique-se de inserir o cĂłdigo antes de concluir o pagamento.
Last updated: 2024-10-26
Post by critcho on WebVisu Numpad dialog - Dialogtitle not accepting string variable
CODESYS Forge
talk
(Post)
I have a WebVisu page which is re-used for multiple types of gas; it displays the alarm thresholds etc. for one gas at a time. I have an array of structures holding the set-points for each of the gasses. I'm trying to change the dialog title for the value input pop-up (VisuDialogs.Numpad). The Dialogtitle is set to Gas_Alarms.HighAlarmActivationLevelDialog, which is a string(50): When the gas type is changed (page first loaded, or prev/next buttons), METHOD Gas_Alarms.Update_Display_Variables is called, to update the strings used for the dialog titles so it shows GasName High Alarm Activation Level (EngineeringUnits), e.g. CO2 High Alarm Activation Level (PPM): HighAlarmActivationLevelDialog := Insert(' High Alarm Activation Level ()', EngineeringUnits, 30); HighAlarmActivationLevelDialog := Insert(HighAlarmActivationLevelDialog, GasName, 0); (That's not where the problem is, I'm just explaining why I'm using a variable dialogue title.) The variables used are definitely strings, but i'm always getting the error: "The type of the dialog title must be either STRING or WSTRING". I've tried moving HighAlarmActivationLevelDialog etc. to the GVL and also changing them to WSTRING, I even tried adding them to the structure array, but I always get the same error. Clearing the dialog title for that element removes the error - so I'm confident it's not a phantom error caused by something else. But I should be able to add these titles, can't just nuke them all to make it work. The MinVal and MaxVal for the Numpad are called from the array, e.g. GVL.Gas_Alarm_Configs[0].ScaledValueMIN, they are not getting an error. I am using array indexes 1 - 5 for the gasses, when I load the form or change gas, I copy the selected index to index 0 of the array, and values from Gas_Alarm_Configs[0].[ALL] are displayed on the page. When they hit save, I copy Gas_Alarm_Configs[0].[ALL] to Gas_Alarm_Configs[CurrentGasIndex].[ALL]. (ALL just means every element, I can't figure out how to display an asterix in this question... :) ) I've searched online for variable title dialog, but not found anything to help. Thanks for your help!
Last updated: 2025-05-29
Post by jzhvymetal77 on IecVarAccessLibrary.IBaseTreeNode methon
CODESYS Forge
talk
(Post)
I had this code working in a previous version of CoDeSys to read variables from a GVL that were added to the Symbol configuration. The problem now is that when I get the _IBaseTreeNode_Parent, it returns a valid interface, but none of the methods or properties work. If you monitor the _IBaseTreeNode in the watch window, it does show the correct child count. However, it fails at step 30, where the child count incorrectly returns zero. In the image, you can see that the watch window displays the correct value that the property should return. Attached is the full project code. FUNCTION_BLOCK Symbols_TO_STR VAR_INPUT i_sPath : STRING(255); i_diIndexChild : DINT; i_diIndexComponent : DINT; END_VAR VAR_OUTPUT q_diChildCount : DINT; q_diComponentCount : DINT; q_sName : STRING(255); q_sValue : STRING(255); q_sType : STRING(80); q_sErrorResult : STRING(80); END_VAR VAR uiStepCopy : UINT; uiStep : UINT; uiStepProcessCopy : UINT; uiStepProcess : UINT; _IBase : IecVarAccessLibrary.IBase; _pIIecVarAccess5 : POINTER TO IecVarAccessLibrary.IIecVarAccess5; _IIecVarAccess5 : IecVarAccessLibrary.IIecVarAccess5; _RTS_IEC_RESULT : IecVarAccessLibrary.RTS_IEC_RESULT; _udiResult : UDINT; _VariableInformationStruct : IecVarAccessLibrary.VariableInformationStruct; _IBaseTreeNode_Parent : IecVarAccessLibrary.IBaseTreeNode; _IBaseTreeNode_Child : IecVarAccessLibrary.IBaseTreeNode; _ITypeDesc_Child : IecVarAccessLibrary.ITypeDesc; _TypeDescAsUnion_Child : IecVarAccessLibrary.TypeDescAsUnion; _arIBaseTreeNode_Child : ARRAY[0..20] OF IecVarAccessLibrary.IBaseTreeNode; _TypeClass_Child : IecVarAccessLibrary.IBaseLibrary.TypeClass; _psSymbolName_Child : POINTER TO STRING; _sSymbolName_Child : STRING(255); _IBaseTreeNode_Component : REFERENCE TO IecVarAccessLibrary.IBaseTreeNode; _TypeClass_Component : IecVarAccessLibrary.IBaseLibrary.TypeClass; _ByteAddress_Component : __XWORD; _ByteOffset_Component : __XWORD; _sArrayIndexName_Component : STRING(20); _diArrayIndexCalc_Component : DINT; _diArrayIndexValue_Component: DINT; _psSymbolName_Component : POINTER TO STRING; _sSymbolName_Component : STRING(255); END_VAR uiStepCopy:=uiStep; uiStepProcessCopy:=uiStepProcess; CASE uiStep OF 10: // GET IBASE FROM CURRENT APP _IBase:= IecVarAccessLibrary.IecVarAccGetFirstInterface2(0); IF _IBase<>0 THEN uiStep:=20; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IecVarAccGetFirstInterface2'); uiStep:=9000; END_IF 20: //QueryInterface IIecVarAccess5 from IBASE _pIIecVarAccess5 := _IBase.QueryInterface(IecVarAccessLibrary.ITFID_IIecVarAccess5, ADR(_RTS_IEC_RESULT)); IF _pIIecVarAccess5<>0 AND _RTS_IEC_RESULT=0 THEN _IIecVarAccess5 := _pIIecVarAccess5^; uiStep:=30; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': QueryInterface_IIecVarAccess5'); uiStep:=9000; END_IF 30: // Get IBaseTreeNode_Parent _IBaseTreeNode_Parent := _IIecVarAccess5.VarAccGetNode3(ADR(i_sPath), ADR(_VariableInformationStruct), ADR(_RTS_IEC_RESULT)); IF _IBaseTreeNode_Parent<>0 AND _RTS_IEC_RESULT=0 THEN q_diChildCount:=_IBaseTreeNode_Parent.ChildCount; uiStep:=40; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IBaseTreeNode_Parent'); uiStep:=9000; END_IF 40: // Get IBaseTreeNod_Child IF(q_diChildCount-1>=i_diIndexChild AND i_diIndexChild >=0) THEN _IBaseTreeNode_Child := _IBaseTreeNode_Parent.GetChild(i_diIndexChild); IF _IBaseTreeNode_Child<>0 THEN uiStep:=50; ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': IBaseTreeNode_Parent'); uiStep:=9000; END_IF ELSE q_sErrorResult:=CONCAT(UINT_TO_STRING(uiStep), ': i_diIndexChild OutBounds'); uiStep:=9000; END_IF
Last updated: 2025-08-20
Post by spiessli on Raspberry Pi 4 with Legacy Drivers and Codesys 3.5.19 Patch 4
CODESYS Forge
talk
(Post)
Hi, I wanted to use the Adafruit Hat for the Raspberry and get acquainted with Softmotion using servos for RC models. This did work great with Codesys 3.5.19 Patch 1, but with Patch 4 and 5 i get errors. I suspect changes in the SoftMotion library have broken dependencies in the legacy drivers, might that be true? Thanks for any hint, spiessli Here the error log: ------ Übersetzungslauf gestartet: Applikation: Device.Application ------- Code typisieren... Code erzeugen... [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.6.0.0 (3s - smart software solutions gmbh): GetStandardConfigParams AXIS_REF_SERVO: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet Übersetzung abgeschlossen -- 15 Fehler, 0 Warnungen : Kein Download möglich
Last updated: 2023-12-19
Post by spiessli on Raspberry Pi 4 with Legacy Drivers and Codesys 3.5.19 Patch 4
CODESYS Forge
talk
(Post)
Thanks for the suggestion, I have tried it eagerly: I have updated all packages to latest version with Codesys Installer and installed newest runtime and gateway on Raspberry Pi. Unfortunately, the error is still there. As soon as I add the SM_Drive_Servo to the device tree, I get the error below when generating the code. Reverting SM3_Basic to version 4.14 makes the error disappear. ------ Übersetzungslauf gestartet: Applikation: Device.Application ------- Code typisieren... Code erzeugen... [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0032: Typ 'Unbekannter Typ: 'ConfigGetParameterValueLREAL(pParam, 0)'' kann nicht in Typ 'LREAL' konvertiert werden [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0046: Bezeichner 'ConfigGetParameterValueLREAL' nicht definiert [FEHLER] sm3_drive_servo, 4.10.0.0 (codesys): GetStandardConfigParams [AXIS_REF_SERVO]: C0035: Programmname, Funktion oder Funktionsbausteinstanz an Stelle von 'ConfigGetParameterValueLREAL' erwartet Übersetzung abgeschlossen -- 15 Fehler, 0 Warnungen : Kein Download möglich
Last updated: 2023-12-20
Post by ara32 on CODESYS 4 Linux:
CODESYS Forge
talk
(Post)
Hello! I managed to correctly launch CODESYS Developer Studio 3.5.17, almost all functionality works. The only issue remaining is that when connecting to a device and obtaining its public key, the NCryptEncrypt function is called, which is not fully implemented in the DLL source code, resulting in the connection not being established. Currently, the code of this function in the Wine repository looks like this: SECURITY_STATUS WINAPI NCryptEncrypt(NCRYPT_KEY_HANDLE key, BYTE *input, DWORD insize, void *padding, BYTE *output, DWORD outsize, DWORD *result, DWORD flags) { struct object *key_object = (struct object *)key; TRACE("(%#Ix, %p, %lu, %p, %p, %lu, %p, %#lx)\n", key, input, insize, padding, output, outsize, result, flags); if (flags & ~(NCRYPT_NO_PADDING_FLAG | NCRYPT_PAD_OAEP_FLAG | NCRYPT_PAD_PKCS1_FLAG | NCRYPT_SILENT_FLAG)) { FIXME("Flags %lx not supported\n", flags); return NTE_BAD_FLAGS; } if (flags & NCRYPT_NO_PADDING_FLAG || flags & NCRYPT_PAD_OAEP_FLAG) { FIXME("No padding and oaep padding not supported\n"); return NTE_NOT_SUPPORTED; } if (key_object->type != KEY) return NTE_INVALID_HANDLE; return map_ntstatus(BCryptEncrypt(key_object->key.bcrypt_key, input, insize, padding, NULL, 0, output, outsize, result, flags)); } The program crashes due to the NCRYPT_PAD_OAEP_FLAG flag. I'm not proficient in C++, but I attempted to add handling myself, and here's the result: SECURITY_STATUS WINAPI NCryptEncrypt(NCRYPT_KEY_HANDLE key, BYTE *input, DWORD insize, void *padding, BYTE *output, DWORD outsize, DWORD *result, DWORD flags) { struct object *key_object = (struct object *)key; TRACE("(%#Ix, %p, %lu, %p, %p, %lu, %p, %#lx)\n", key, input, insize, padding, output, outsize, result, flags); if (flags & ~(NCRYPT_NO_PADDING_FLAG | NCRYPT_PAD_OAEP_FLAG | NCRYPT_PAD_PKCS1_FLAG | NCRYPT_SILENT_FLAG)) { FIXME("Flags %lx not supported\n", flags); return NTE_BAD_FLAGS; } if (flags & NCRYPT_NO_PADDING_FLAG) { FIXME("No padding not supported\n"); return NTE_NOT_SUPPORTED; } BCRYPT_OAEP_PADDING_INFO oaepInfo = { 0 }; oaepInfo.pszAlgId = BCRYPT_SHA1_ALGORITHM; NTSTATUS status = BCryptEncrypt(key_object->key.bcrypt_key, input, insize, &oaepInfo, NULL, 0, output, outsize, result, flags); if (key_object->type != KEY) return NTE_INVALID_HANDLE; return map_ntstatus(BCryptEncrypt(key_object->key.bcrypt_key, input, insize, padding, NULL, 0, output, outsize, result, flags)); } Now, when calling the connection, it crashes with the error "bcrypt:BCryptEncrypt flags 0x4 not implemented." Can anyone help with enhancing this functionality or at least point me in the right direction?
Last updated: 2024-03-22
Post by jickisticki on Witch library?
CODESYS Forge
talk
(Post)
Crafting my Fellowship Personal Statement was like weaving the threads of my aspirations into a tapestry of words. Each sentence became a brushstroke, painting a vivid portrait of my journey and ambitions. Beyond being just a document, it became a mirror reflecting the depth of my experiences. Like a conductor guiding an orchestra, my personal statement was composed to resonate with my unique voice. In the realm of specialized opportunities, this statement serves as a compass, guiding me toward the next chapter of my professional growth. With each word, I felt the guidance of mentors shaping my story into an eloquent narrative.
Last updated: 2023-08-17
Post by ellcap on Did a library update and now can't open project
CODESYS Forge
talk
(Post)
EDIT: Title was a mistake. Should say now I can't compile / download project. Codesys V3.5SP19 Patch 2. Updated the libraries/packages using the Codesys Installer. I'm hit with this error ------ Build started: Application: ------- Typify code... [ERROR] iecvaraccess, 4.4.0.0 (system): IecVarAccess: C0086: No definition found for interface 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): IecVarAccess: C0077: Unknown type: 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): Initialize [IecVarAccess]: C0032: Cannot convert type 'IECVARACCESS(iecvaraccess, 4.4.0.0 (system))' to type 'IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0231: Expression of type 'BOOL' expected in this place [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0077: Unknown type: 'ITFID_IIecVarAccess17' [ERROR] iecvaraccess, 4.4.0.0 (system): QueryInterface [IecVarAccess]: C0046: Identifier 'ITFID_IIecVarAccess17' not defined Compile complete -- 6 errors, 101 warnings Build complete -- 6 errors, 101 warnings : No download possible
Last updated: 2023-09-25
Post by damian177 on Codesys V3.5 + Pixtend v1.3 + RaspberryPi
CODESYS Forge
talk
(Post)
Hi, I use Pixtend v1.3 with my RaspberryPi with Codesys V3.5 SP15 Patch1. Actually in my project I used two packages: - CODESYS Contro for Raspberry PI 3.5.15.10 - PiXtend for CODESYS 1.3.8.0 Now I would like to extend my project about the IIot Libraries SL package, I installed them. Next I added SMS_Service_SL 1.0.0.8 version library and I have problem with compile my project because I get error: [ERROR] PiXtend_DemoProject_q: Library Manager [Device: PLC Logic: Application]: Could not open library '#CAADTUtil'. (Reason: The placeholder library 'CAADTUtil' could not be resolved.) Any have idea what can I do to properly add SMS library to my project?
Last updated: 2023-09-26
Post by derpaul on PFC200 Update to 4.9.0.0 - No Connection
CODESYS Forge
talk
(Post)
Hallo Today I decided to perform an Update on my PFC200 but after the Update the Device was not reachable anymore. I tried reseting to factory reset. Software reset and so on, but nothing helps... In my Router I can see it, I cann SSH into the PFC200 but it is not reachable. Then I try to go back to 4.8.0.0 But now I get this error: [INFORMATION] Befehl SSH auf root@192.168.1.17 ausfĂĽhren: Laufzeitsystem stoppen [FEHLER] Fehlerausgabe: /etc/init.d/codesyscontrol: line 34: /opt/codesys/scripts/init-functions: No such file or directory [INFORMATION] Standardausgabe: /etc/init.d/codesyscontrol: line 34: /opt/codesys/scripts/init-functions: No such file or directory Please help, I can't get this thing working... Regards
Last updated: 2023-09-27
Post by derpaul on PFC200 Update to 4.9.0.0 - No Connection
CODESYS Forge
talk
(Post)
Hallo Today I decided to perform an Update on my PFC200 but after the Update the Device was not reachable anymore. I tried reseting to factory reset. Software reset and so on, but nothing helps... In my Router I can see it, I cann SSH into the PFC200 but it is not reachable. Then I try to go back to 4.8.0.0 But now I get this error: [INFORMATION] Befehl SSH auf root@192.168.1.17 ausfĂĽhren: Laufzeitsystem stoppen [FEHLER] Fehlerausgabe: /etc/init.d/codesyscontrol: line 34: /opt/codesys/scripts/init-functions: No such file or directory [INFORMATION] Standardausgabe: /etc/init.d/codesyscontrol: line 34: /opt/codesys/scripts/init-functions: No such file or directory Please help, I can't get this thing working... Regards
Last updated: 2023-09-27
Post by ofey on Modbus TCP communication
CODESYS Forge
talk
(Post)
Hi! I tried setting up the PLC I'm working with (Beijer GN-9373) to connect to a modbus master running on a laptop. I have an ethernet connection (via USB-C to ethernet) between the laptop and the controller. I have tried following tutorial on how to set this up. I have added an ethernet device with the IP-address of the PLC. Further I added a ModbusTCP_Slave_Device with default settings. I get the error "Failed to open TCP Port: 1" when I try to go online with the PLC. Earlier I tested the exact same set up with the soft PLC from codesys. I can then read/write values correctly with the Modbus master i have running on the laptop. Hope anybody can help me with this, thanks in advance!
Last updated: 2023-10-06
Post by matthew on New Ladder Editor Issues
CODESYS Forge
talk
(Post)
Hi There, When using the new ladder editor there is no option for function blocks to Remove uncalled FB call parameters. I also see no update function block. When you double click the function block it no longer opens the function block. I also now get warnings if I insert FB call without a contact in front. Warning is: (Impl)): C0373: Expression or part of it has no effect I take it the new editor must work differently? The only reason for using new ladder editor is the ST execute/block editing is far better, If you have alot of text in the old ST execute the editor window is very small and when online it's even worse. The new ST block seems a lot better Thanks!
Last updated: 2023-10-10
Post by simotion on Pointer to Softmotion axis
CODESYS Forge
talk
(Post)
In my projet I use Softmotion. There are several Softmotion axis (type SM_Drive_Virtual). In the Global Variable List I have an array of pointers to the adress of the Axis. Axis : ARRAY[1..iMaxCntAxes] OF POINTER TO AXIS_REF_SM3 := ADR(AX01_Axis), // [1 ADR(AX02_Axis), // [2] This works, but when compiling I get the message : . [WARNING] E3D: GVL Device: PLC Logic: Application: C0564: A reference to uninitialized variable AX01_Axis is used for initialization of Axis. Accessing the uninitialized variable may result in unexpected behavior. [WARNING] E3D: GVL Device: PLC Logic: Application: C0564: A reference to uninitialized variable AX02_Axis is used for initialization of Axis. Accessing the uninitialized variable may result in unexpected behavior. Is there a way when initializing to force the hardware (softmotion axis) to first initialize and then the Global Variable List?
Last updated: 2023-10-25
Post by grant32 on Codesys ARTI .XML file not creating but working.
CODESYS Forge
talk
(Post)
Hello, I am working on a project with a Beijer Nexto Xpress. I have done this a few times with no issues but for some reason this time when creating a Symbol Configuration the ARTI .xml file is not being created in the Project Folder. However when manually putting the ARTI tags in the HMI program they are connected and work. So I am just not getting the file to import all the tags. I can do it manually which is fine but no matter where the project folder is saved this occurs. Anyone experienced this? Did not see another forum on it.
Last updated: 2023-10-27
Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug?
CODESYS Forge
talk
(Post)
I'm getting closer to the error. The combination of STRUCT and ARRAY probably causes the strange behavior. As soon as the ARRAY is followed by a variable, the problem arises. Examples: X: ARRAY[1..2] OF INT; // okay Y: ARRAY[1..2] OF STRUCT; // problem Z: STRUCT; Z.ArrayOfInt[1]; // okay Z.ArrayOfStruct[1].Variable // problem // *update - array of array also causes the error A: ARRAY[1..2] OF ARRAY[1..4] OF BOOL; // problem I can't be the only one who has this problem. Or? Maybe there is a solution. Anyone? Or is it a bug after all?
Last updated: 2023-11-17
Post by felipemsgarcia on Edge Gateway online, but PLC is not online
CODESYS Forge
talk
(Post)
Hello, Up until yesterday (2023/11/20) I was able to connect to the PLC remotely with no issues through Edge Gateway. However, today I can see the Edge Gateway online but I can find the PLC even if I do a network scan. Following the same path as janber0206 @ https://forge.codesys.com/forge/talk/automation_server/thread/e78b11d7e9/, I looked into certificates and found that one of the Trusted publisher certificates has expired earlier today (2023/11/21). Please see image. Questions are: Does it affect the connection to the PLC through Edge Gateway? How do I fix it? Thank you very much in advance!
Last updated: 2023-11-21
Post by appling on License status of Linux 64Bit runtime via CLI
CODESYS Forge
talk
(Post)
Hi, I have a Linux 64Bit system with a Codesys application running on it. It stops after 2hours and a few minutes, which makes me think something is wrong with the installed license. (in my last timing it stopped after 2h4min, on the codesys website it is stated that runtimes without a license stop after 2h) I installed the license via a USB license dongle that I activated on my workstation with the Codesys IDE a while ago. Now the system is shipped at not accessible physically, only remotely via SSH. So is there a way to check the status of the License of the Codesys runtime when it is running on the system? Running the codesyscontrol script with "status" just tells me that it is running, but does not provide any license information. Best regards
Last updated: 2023-12-04
Post by andre-luis on Check if Codesys runtime is on 'Running' or 'Stopped' state?
CODESYS Forge
talk
(Post)
Hi there, I'm running the Codesys runtime on Windows 64 and I need to know if it is on "Running" or "Stopped" state just after a system crash. The following commands works perfectly well to (re)start it... net stop “CODESYS Control Win V3 - x64" net start “CODESYS Control Win V3 - x64" ...however I'm unable to determine when it is required to be call; I mean, by checking the System Tray icon, it is possible to know if it is on "Stopped" state, but I wanted to run a .BAT command to retrieve it. How can we do that?
Last updated: 2024-07-02
Post by naks on Change IP address from IEC code
CODESYS Forge
talk
(Post)
Hi, I'm working with wago 750-8212 controller. I want to change the IP address of the Ethernet adapter from webvisu. I have read some other threads in this forum and I have tried the following: Added the following text to the config file CODESYSControl.cfg: [SysSocket] Adapter.0.Name="br1" Adapter.0.EnableSetIpAndMask=1 Used the below code : IF xUpdateEthernet THEN Ethernet.Enable := FALSE; Reconfig ( xExecute := TRUE, itfNode := Ethernet, eError => ErrorReconfig, xBusy => xBusy, xDone => xDone, xError => xErrorReconfigure); IF Reconfig.xDone THEN ErrorCode := Ethernet.UpdateConfiguredIPSettings(IpAddress := NewIp, gateway := newGateway, subnetmask := newSubnetmask); END_IF IF Reconfig.xDone OR Reconfig.xError THEN reconfig(xExecute := FALSE); END_IF Ethernet.Enable := TRUE; Reconfig(xExecute := TRUE, itfNode := Ethernet ); END_IF I could change the IP address but when i restart my Controller then the IP address resets to the original, Is there anything I have missed, what else can i try ? Thank you in advance.
Last updated: 2024-07-08
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.