Post by joep on Custom robotics kinematics model debugging ^{CODESYS Forge talk (Post)}
When trying to move my axis using any group move instruction I get the following error: SMC_CP_INVALID_PATH_ELEM and axisgroup goes into errorstop state. I tested my methods thoroughly which makes it hard for me to debug. Are there some hidden rules I need to abide to? How would one go about debugging a custom robotics model, since the information inside isn't accesible. Is it possible to find the source of where the function breaks? Any hint in the right direction would be appreciated. Best regards
Last updated: 2024-06-08

Post by mozed on Signature verification faited fro the following package ^{CODESYS Forge talk (Post)}
Good morning, I'm trying to open a project but codesys tells me that there are certain packages that I don't have and that I need to download them. Once the installation of the packages begins, it shows me a error that the signature of certain packages does not correspond to that coming from the accepted installation context. Do you have a solution to my problem please, it is very urgent in my work. Sincerely
Last updated: 2024-06-11

Post by dario99 on Error when creating a new HTML5 visualisation ^{CODESYS Forge talk (Post)}
Hello, I'm quite new here. I would like to create a new HTML5 visualisation. I have already imported some templates via the visualisation elements repository, this worked fine. However, when I want to open the html5control.html in the editor or create a new project myself, I always get this error: default filesystem storage could not be found. Did you add storages.plugin to the profile? I can't find this plugin. The Package Designer (V4.1.0.0) and Codesys Visualisation (V4.5.0.0) plugins are installed Can anyone help me? Thank you very much!
Last updated: 2024-06-14

Post by gunstr on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
I now tried to install 4.17.0.0 on a fully clean installations: A brand new RPi 4B Install latest Raspberry Pi OS Lite, Release date 13 May 2025, 64bit run sudo apt update && sudo apt full-upgrade When asked - Select to install the updated version of '/etc/initramfs-tools/initramfs.conf' Install CODESYS Control for Raspberry Pi SL. version 4.17.0.0 Log output: [INFORMATION] Connected successfully! [INFORMATION] Successfully connected to target (192.168.0.197) [WARNING] No supported container engine found on device. You have to install a supported container engine to use Virtual Control. Please contact the Administrator of the device. [WARNING] Error detecting container architecture [INFORMATION] Finished reading device information [ERROR] Error output: /var/lib/dpkg/info/codesyscontrol.postinst: 88: check_legacy_extensionapi_folder: not found [INFORMATION] Standard output: Selecting previously unselected package codesyscontrol. [INFORMATION] Standard output: (Reading database ... 76772 files and directories currently installed.) [INFORMATION] Standard output: Preparing to unpack .../codesyscontrol_raspberry_4.17.0.0_all.deb ... [INFORMATION] Standard output: Unpacking codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: Setting up codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: make config rw [INFORMATION] Standard output: set folder permissions [INFORMATION] Standard output: prepare permissions [INFORMATION] Standard output: check legacy extension api folder [INFORMATION] Standard output: create and install daemon [INFORMATION] Standard output: codesyscontrol started [WARNING] Unable to detect Raspberry Pi Architecture. Setting armv6l as default, you can change this through the settings panel. [INFORMATION] Standard output: codesyscontrol stopped [ERROR] Expected exit value of command failed: expected 0, received 1 [WARNING] Error setting the Raspberry Pi Architecture [ERROR] Error installing codesyscontrol If I read the log correctly the control is actually installed but cannot start. I'm running out of ideas how to proceeed now, any suggestions are welcome.
Last updated: 2025-09-03

How to call the same program from library and get the vars updated. ^{CODESYS Forge talk (Thread)}
How to call the same program from library and get the vars updated.
Last updated: 2023-08-23

Post by faceplant on Get the .git folder path via scripting ^{CODESYS Forge talk (Post)}
Using the git scripting API, is there any way to get the file path of the project's .git/ folder?
Last updated: 2024-08-08

Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Thread)}
Modbus: Is there a way to get the channel index from the channel name?
Last updated: 2024-10-21

Programmatically change the IP addresses of the Modbus TCP slave devices ^{CODESYS Forge talk (Thread)}
Programmatically change the IP addresses of the Modbus TCP slave devices
Last updated: 2024-12-11

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined ^{CODESYS Forge talk (Thread)}
VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined
Last updated: 2025-03-06

Post by tk096 on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hi, the subsequent interpreter should report an error? The reader is just reading the file without checking the syntax.
Last updated: 2025-06-17

Navigating the Modern Educational Landscape: The Rise of Strategic Academic Support ^{CODESYS Forge talk (Thread)}
Navigating the Modern Educational Landscape: The Rise of Strategic Academic Support
Last updated: 2025-09-09

Can't get the IEC var address correcttly when using the function "IecVarAccGetAddress 2" ^{CODESYS Forge talk (Thread)}
Can't get the IEC var address correcttly when using the function "IecVarAccGetAddress 2"
Last updated: 2018-12-25

Warning: the number of slave has changed or is different from the configuration ^{CODESYS Forge talk (Thread)}
Warning: the number of slave has changed or is different from the configuration
Last updated: 2017-09-11

Could not save the project: Could not find part of the path ^{CODESYS Forge talk (Thread)}
Could not save the project: Could not find part of the path
Last updated: 2014-09-10

MC_Home function block is not initiating homing sequence on the drive all the times ^{CODESYS Forge talk (Thread)}
MC_Home function block is not initiating homing sequence on the drive all the times
Last updated: 2022-08-25

How do you find the PID of the process using http://127.0.0. ^{CODESYS Forge talk (Thread)}
How do you find the PID of the process using http://127.0.0.
Last updated: 2008-10-31

Is there any way to get the name of the current action... pou... ^{CODESYS Forge talk (Thread)}
Is there any way to get the name of the current action... pou...
Last updated: 2017-03-20

How to get the SD card Image for the Raspberry Pi ^{CODESYS Forge talk (Thread)}
How to get the SD card Image for the Raspberry Pi
Last updated: 2015-12-21

How to slow down the clock of the main execution program? ^{CODESYS Forge talk (Thread)}
How to slow down the clock of the main execution program?
Last updated: 2011-07-18

the idea of design pattern stemed from the computer world ^{CODESYS Forge talk (Thread)}
the idea of design pattern stemed from the computer world
Last updated: 2007-05-10

Exceeded the EtherCAT task cycle time when the controller is rebooted ^{CODESYS Forge talk (Thread)}
Exceeded the EtherCAT task cycle time when the controller is rebooted
Last updated: 2023-01-12

Access the excel file and Change the description based on cell requirement. ^{CODESYS Forge talk (Thread)}
Access the excel file and Change the description based on cell requirement.
Last updated: 2017-10-07

How to change the Port for the Webserver / cannot access webvisu ^{CODESYS Forge talk (Thread)}
How to change the Port for the Webserver / cannot access webvisu
Last updated: 2019-06-17

Sort by relevance or date