Post by pietrobalint on Retain / Persistent Variables in Codesys for Raspberry Pi ^{CODESYS Forge talk (Post)}
Hi micik, I am not sure I am using well the code, because I checked the directory and there is no retains.ret file. Now I deleted the code from my project and the values are still works as persistant variables after ssh reboot it seems to me they retain as their previous value. So I am a bit confused, maybe 4.12.0.0 Raspberry Pi SL solved the persitent variable problem...
Last updated: 2024-08-20

Post by paulpotat on cm4 runtime problem ^{CODESYS Forge talk (Post)}
It looks like it works with 4.13.0.0 indeed. However when installing the runtime, it's not possible to select the multicore option (see attachment). But once the 4.13.0.0 runtime is installed, the logs seems to indicate that the runtime is running in multicore mode. Looking at "htop" output, it seems like it actually is running on multiple CPU. This is very misleading, is it normal or is this a bug ? Thank you for your answer @eschwellinger, BR
Last updated: 2024-09-02

Post by ph0010421 on Task time too fast? ^{CODESYS Forge talk (Post)}
Hello I've made an FB which is a TCP server. It uses the excellent CAA NetServices library. If I have the FB in a task <4ms, then the RT crashes immediately at boot up. If the task >=4ms, it starts and runs perfectly. This is even if the block is not doing anything; just instantiated. Am I missing something silly? Why would a low task time cause this? 4ms is perfectly adequate, but I'm just interested why... thanks PH
Last updated: 2024-11-27

Post by selim on Need help to get RS-485 signal in Cosesys . ^{CODESYS Forge talk (Post)}
Hello Mr./Ms., I invested Raspberry Pi lot of time to get the output from the raspberry PI5. But, i did not get the signal. I use a raspberry pi 5> RS485 can hat > Modbus RTU, Industrial 8-ch analog acquisition module >weight transmitter jy-s60> S-load cell. I did not able to receive the signal from Modbus RTU to Raspberry PI5 where I use the RS 485 serial connection.
Last updated: 2024-12-01

Post by trusty-squire on How can you get the active frame index from a frame ^{CODESYS Forge talk (Post)}
If you are switching a frame based on the "Switch Frame Variable", then just use a variable that is accessible to your program to set your active frame. If you're trying to see which is the active visualization, then use the "CurrentVisu" variable. Note you'll need to enable this by checking it on in the Visualization Manager settings. If it's neither of those, you'll need to be more clear on how you're project is set up.
Last updated: 2025-03-11

Post by johnbomb on Ignore Dependencies When Loading Package? ^{CODESYS Forge talk (Post)}
I'm trying to load a .package into Codesys 3.5.21, but the package is intended to only work with Codesys 3.5.18.0 and is configured with dependencies on the specific versions of other packages included with 3.5.18.0, and 21 has newer versions so the package will not install. I would like to install the package anyway to try and get things working on a newer Codesys version, since for some reason the installer for .18 errors out and doesn't fully work in my environment, but .21 seems to work fine.
Last updated: 2025-04-01

Post by fschuler on No connection to Raspberry at runtime installation ^{CODESYS Forge talk (Post)}
Hi, I try to install the Codesys realtime in a Raspberry PI 3B+. When I click on the installation button I get always the message No connection to device: An established connection was aborted by the server. Raspberry 3B+ with newest raspberry PI OS. Codesys 3.5.15 Patch 1 Codesys Runtime Package 3.5.16.20 SSH is activated. I can login with Putty Ping is possible IP address search is possible Just the installation is not started.
Last updated: 2025-07-23

Post by bmatlove on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
I'm trying to firm up alarming of axis faults. Declutter the code and figure out what's what. Diving into it, I see the AXIS_REF_SM3 function block provides uiDriveInterfaceError and dwErrorId, but I can't find any significance of these further than Drive interface error number Parameter number: 1014 and Drive specific error identifier, parameter number: 1031, respectively. Is there some corresponding appendix I could use to decode these? Also, is there any relation to the Error ID (of type SMC_Error) of the MC POUs? MC_Jog, MC_Reset, MC_MoveRelative, etc? If so, are the above errors redundant? Thanks in advance.
Last updated: 2025-09-22

Post by mg0815 on Codesys Control log "eventbuffer full" ^{CODESYS Forge talk (Post)}
Device: RPI 3b or 3B+ System: Wheezy Codesys: 3.5.16.2 I got the Log: 2023-12-13T00:38:43Z, 0x00000054, 2,6,11, !!!! Warning: Eventbuffer full for app=<app>Application</app>; an inputevent with the tag <tag>128</tag> has been dropped This log happens aroud 10 times a second. Sometimes the controller stopped working any more. What is the reason for this? I will update this controller soon (I hope so, but in the meantime I should at least know hoe to prevent this issue) Mario
Last updated: 2023-12-14

Post by jinlee on Multiple WebVisu ^{CODESYS Forge talk (Post)}
Hi guys, I am new to the Visualization. I am having a problem. I have multiple web-panel to use webvisu. I have my software dowwloaded into the one PFC200. There are 3 screens connected to it. I noticed that if I switch page/visualisation on one of the screens, the others will change as well. Three screens are with different URLs that I set in the software. Is there any method to make them independently ? Kind regards, Jin.
Last updated: 2024-01-25

Post by john-martin on Control SL Extension Package doubts ^{CODESYS Forge talk (Post)}
Hello everybody, I'm trying to understand the SL control extension package, more specifically, the external IODriver example, because C integration is very easy and I just made my first C component successfully. Ther External IODriver has no documentation and it's not clear how to proceed. Furthermore, there is no information on how to modify the device descriptor, which is necessary to import the device into the Codesys repository. Any advice ? Thank you in advance and best regards.
Last updated: 2024-02-28

Post by sumit on Not able to see input data coming from eip adapter on codesys ^{CODESYS Forge talk (Post)}
Hello there, I have an eip adapter running (remotely) that is sending data back to eip scanner (running on codesys). I can send data from scanner (codesys) to the adapter but not getting the data back from the adapter. I have verified the incoming data on wireshark but I don't see this data in the codesys. I have tried local variable mapping and global variable mapping not variable values just stays at 0. Please guide.
Last updated: 2024-02-29

Post by rossanoparis on RevPi CONNECT+, CODESYS, EtherCAT master "Filedbus lost synchronicity" ^{CODESYS Forge talk (Post)}
Hello @rmaas I assume, you've already verified and tuned everything regarding the EtherCAT network. In my case the problem was due to a wrong core assignement. I suggest to not use the core #0 for your EtherCAT task. The OS realtime patch, which is present on RevPi OS, uses the core #0 for its porpouses and it mustn't be used by any other task which requires realtime and deterministic features. regards Rossano
Last updated: 2024-04-11

Post by esave on Softmotion Axis Controll ^{CODESYS Forge talk (Post)}
Hello everybody I have two of these EtherCat CiA402 stepper driver from Leadshine: https://www.leadshine.com/product-detail/EM3E-556E.html I want to controll them. I already have implemented them in Codesys with Softmotion. I see the position, the velocity and the status word so I can read everything. See picture 1. But when I want to write something like MC_Power or MC_MoveAbsolut with the SM3_Basic library it wont work and with the MC_Reset POU it shows: "SMC_R_DRIVE_DOESNT_ANSWER". See picture 2. Can somebody help me? Thanks a lot esave
Last updated: 2024-05-24

Post by joep on Custom robotics kinematics model debugging ^{CODESYS Forge talk (Post)}
When trying to move my axis using any group move instruction I get the following error: SMC_CP_INVALID_PATH_ELEM and axisgroup goes into errorstop state. I tested my methods thoroughly which makes it hard for me to debug. Are there some hidden rules I need to abide to? How would one go about debugging a custom robotics model, since the information inside isn't accesible. Is it possible to find the source of where the function breaks? Any hint in the right direction would be appreciated. Best regards
Last updated: 2024-06-08

Post by mozed on Signature verification faited fro the following package ^{CODESYS Forge talk (Post)}
Good morning, I'm trying to open a project but codesys tells me that there are certain packages that I don't have and that I need to download them. Once the installation of the packages begins, it shows me a error that the signature of certain packages does not correspond to that coming from the accepted installation context. Do you have a solution to my problem please, it is very urgent in my work. Sincerely
Last updated: 2024-06-11

Post by dario99 on Error when creating a new HTML5 visualisation ^{CODESYS Forge talk (Post)}
Hello, I'm quite new here. I would like to create a new HTML5 visualisation. I have already imported some templates via the visualisation elements repository, this worked fine. However, when I want to open the html5control.html in the editor or create a new project myself, I always get this error: default filesystem storage could not be found. Did you add storages.plugin to the profile? I can't find this plugin. The Package Designer (V4.1.0.0) and Codesys Visualisation (V4.5.0.0) plugins are installed Can anyone help me? Thank you very much!
Last updated: 2024-06-14

Post by josepmariarams on Limit Axis CNC Jerk using SMC_Polynomial_AbsMaxLocs ^{CODESYS Forge talk (Post)}
Dears. Until now, I have been using CNC libraries with Codesys 3.5SP11. I was using SMC_Polynomial_AbsMaxLocs function, from CNC library, to calculate the axis jerks, interpolating splines, to limit it. Now I have passed to SP20, and the functions which calculates the zeros and the maximum-minimum and zeros of polynomials has been disapeared. Questions: -Exist any FB wich can limit the jerk of individual axis in CNC? -Exist any other functions which can calculate max-min and zeros of polynomials? Thanks
Last updated: 2026-05-22

How to call the same program from library and get the vars updated. ^{CODESYS Forge talk (Thread)}
How to call the same program from library and get the vars updated.
Last updated: 2023-08-23

Post by faceplant on Get the .git folder path via scripting ^{CODESYS Forge talk (Post)}
Using the git scripting API, is there any way to get the file path of the project's .git/ folder?
Last updated: 2024-08-08

Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Thread)}
Modbus: Is there a way to get the channel index from the channel name?
Last updated: 2024-10-21

Programmatically change the IP addresses of the Modbus TCP slave devices ^{CODESYS Forge talk (Thread)}
Programmatically change the IP addresses of the Modbus TCP slave devices
Last updated: 2024-12-11

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

Post by bertcom on STRING conversions to DWORD ^{CODESYS Forge talk (Post)}
@trusty-suire, The problem is not encoding. The problem is that codesys ands ' ' to the string. And the printer can't handle these character.
Last updated: 2025-01-30

VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined ^{CODESYS Forge talk (Thread)}
VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined
Last updated: 2025-03-06

Sort by relevance or date