Search talk: setting value of variable

 
<< < 1 .. 147 148 149 150 > >> (Page 149 of 150)

Post by risele on Modbus connection via Qronox PCD3 M6893 CODESYS Forge talk (Post)
First, if you don't need to change conversion rules in runtime, take a look at "Unit conversion" module (Application -> add object -> UnitConversion). You can specify there biderectional conversion with different units, limits and so on. Second, since MODBUS don't have "real" types but only general 16-bit registers and Real is 32-bit, generally you need a byte-was conversion Real <> two Words. Note, that depending on the devices on both sides, there are two options: Real-> Word1, Word2 or Real-> Word2, Word1, where Word1 is minor register in Modbus register pair and Word2 is major. You can use simple union: TYPE u_Real : UNION rVal:REAL; wVal:ARRAY[0..1] OF WORD; dwVAL:DWORD; //same as previous, may be easier to specify the MB register END_UNION END_TYPE and convert it as following: VAR myUnion:u_Real; rValue_TO_SEND:REAL; rValue_TO_GET:REAL; END_VAR myUnion.rVal:=rValue_TO_SEND; rValue_TO_GET:=myUnion.rVal; Note, that WORD-order should be properly set in MODBUS registers, otherwise you will get strange values. This tool is helpful: https://www.scadacore.com/tools/programming-calculators/online-hex-converter/ Alternative, you can use functions as REAL_TO_DW and DW_TO_REAL from OSCAT_BASIC, for example.
Last updated: 2026-02-19

Post by kunal-pinetics on USB Communication for IP Configuration & Application Update – STM32H Series PLC CODESYS Forge talk (Post)
Hello everyone, I am currently working on a PLC device based on the STM32H series MCU, running CODESYS. At the moment, I can: Change the Ethernet IP address Update/download the PLC application via Ethernet without any issues. However, I would like to implement the same functionality over USB (or Serial via USB) instead of Ethernet. My goals are: Change the device’s Ethernet IP address via USB Download/update the PLC application via USB communication Possibly use USB as a service/programming interface The hardware platform is based on STM32H series, and I am looking for guidance on: Whether CODESYS supports USB device communication for runtime download If a custom USB CDC (Virtual COM Port) implementation is required Whether a specific CODESYS runtime configuration is needed If a bootloader approach is recommended for application updates via USB If anyone has experience implementing USB communication for runtime download or device configuration on an STM32-based PLC, I would really appreciate your guidance. Thank you in advance for your help.
Last updated: 2026-02-26

Post by lukasz on Unresolved reference when trying to upload to Codesys Runtime V3 CODESYS Forge talk (Post)
Hello! I'm working with Codesys SP21 Patch 4. The project builds without any errors. When trying to upload my project to Codesys Runtime V3 x64 I get a lot of Unresolved Reference errors, all with FU- at the start and then -CLOSELAYER2, -GETBUSINFO, -GETFRAME etc. I also get a error pop-up that I should 'update device' in the project but it's not specified to which version or anything useful really.There's also not much to choose from. When I check Runtime version in the systray I get 3.5.21.40 and it's the same as I have set up in the project as the device. All information I get is that it should be clear from the errors but no useful information is provided in the errors. Do I need to install some library? I checked other posts and for different reference error and this was the answer. Thanks in advance!
Last updated: 2026-03-25

Post by anthony-p on Codesys Installation problem CODESYS Forge talk (Post)
Hello, I'm trying to install Codesys SP21p6 (but the error occurs in SP22 too for eg.) but it fails to install ApplicationComposer. Trying to install myself (version 4.4.0.0 or 4.5.0.0) by clicking 'changing the installation' from the Codesys Installer isn't better. The only message I get is "An error occured during the installation: The file [..]/ApplicationComposer.plugin.dll isn't a valid plugin" How is that? The installation went good the last time before a reinstallation... However, installing the version 4.3.0.0 seems to be successful without knowing what's the difference. I already tried to : - Restart my computer - Delete all temporary files in C:\ProgramData\CODESYS\Temporary Files - Download the package from the store - Compare the ApplicationComposer.plugin.dll from another computer (where the installation is OK) and it's exatly the same For your information, I can install other packages, such as Codesys CFC Can you help me? Do you have any idea of what could be the problem?
Last updated: 2026-06-16

Post by wallandreas008 on OPC-Server V3 - keine Items zu sehen... CODESYS Forge talk (Post)
Hallo ich habe ebenfalls Probleme mit dem Verbindungsaufbau zu 3 ABB SPSen nach einem Windows Update. hier meine OPCServer.ini [Server] updaterate=200 publicgroups=0 logevents=1 syncinit=1 PLCs=3 PLC0=PLC1 PLC1=PLC2 PLC2=PLC3 [PLC:PLC1] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC01 reconnecttime=10 waittime=12 active=1 logevents=1 logfilter=0 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_101 parameter0=Address value0=192.168.0.101 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC2] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC02 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_102_ parameter0=Address value0=192.168.0.102 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC3] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC03 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_103_ parameter0=Address value0=192.168.0.103 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [Redundancy] NumOfGroups=0 Im Logfile habe ich immer diese Meldungen: ;********* ;<loggername>OPCServer.log</loggername> ;<logoptions> ; <maxfiles>0</maxfiles> ; <maxfilesize>1048576</maxfilesize> ;</logoptions> ;********* 2026-09-29T12:01:40.598+0200, OPC-Server V3.5.20.0 by CODESYS Development GmbH. 2026-09-29T12:01:40.598+0200, Path for ini-File: C:\ProgramData\CODESYSOPC\OPCServer.ini 2026-09-29T12:01:40.598+0200, Path for AE-Config: C:\Program Files (x86)\CODESYS 3.5.20.0\CODESYS OPC Server 3\OPCServerA.ini 2026-09-29T12:01:40.598+0200, AE-Configuration unused. 2026-09-29T12:01:40.598+0200, 3 PLCs configured 2026-09-29T12:01:40.598+0200, [PLC1]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC2]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC3]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC1]: Open communication successful 2026-09-29T12:01:40.600+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulId = 0, m_pPlcConfig->pszName = PLC1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulWaitTime = 12000, m_pPlcConfig->ulReconnectTime = 10000 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->pszProjectName = ZE_PC01 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.601+0200, [PLC2]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulId = 1, m_pPlcConfig->pszName = PLC2 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->pszProjectName = ZE_PC02 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszInstance = TCPIP_0_102_ 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.601+0200, [PLC2]: parameter0 = Address, value0 = 192.168.0.102 2026-09-29T12:01:40.601+0200, [PLC2]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.601+0200, [PLC2]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.601+0200, [PLC2]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.601+0200, [PLC2]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.601+0200, [PLC2]: ----------------------------------- 2026-09-29T12:01:40.601+0200, [PLC2]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszInstance = TCPIP_0_101 2026-09-29T12:01:40.602+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.602+0200, [PLC3]: ---------- Configuration ---------- 2026-09-29T12:01:40.602+0200, [PLC3]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulId = 2, m_pPlcConfig->pszName = PLC3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->pszProjectName = ZE_PC03 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszInstance = TCPIP_0_103_ 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.602+0200, [PLC3]: parameter0 = Address, value0 = 192.168.0.103 2026-09-29T12:01:40.602+0200, [PLC3]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.602+0200, [PLC3]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.602+0200, [PLC3]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.602+0200, [PLC3]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.602+0200, [PLC3]: ----------------------------------- 2026-09-29T12:01:40.602+0200, [PLC3]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.603+0200, [PLC1]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.603+0200, [PLC1]: parameter0 = Address, value0 = 192.168.0.101 2026-09-29T12:01:40.603+0200, [PLC1]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.603+0200, [PLC1]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.603+0200, [PLC1]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.603+0200, [PLC1]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.603+0200, [PLC1]: ----------------------------------- 2026-09-29T12:01:40.603+0200, [PLC1]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.623+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.625+0200, [PLC2]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.850+0200, * ERROR: [PLC2]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.850+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.851+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.851+0200, [PLC2]: Starting adding new symbols 746... 2026-09-29T12:01:40.852+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.852+0200, [PLC3]: Starting adding new symbols 1168... 2026-09-29T12:01:40.875+0200, [PLC2]: Adding symbols finished 2026-09-29T12:01:40.875+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:40.881+0200, [PLC3]: Adding symbols finished 2026-09-29T12:01:40.881+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:45.928+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:45.928+0200, [PLC1]: Open communication successful 2026-09-29T12:01:45.929+0200, [PLC1]: Starting adding new symbols 499... 2026-09-29T12:01:45.933+0200, [PLC1]: Adding symbols finished 2026-09-29T12:01:45.933+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:46.110+0200, OPC-Server started successful. 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:55.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.699+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:59.341+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:59.341+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:05.700+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:05.700+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.627+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:15.693+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:15.693+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:25.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:25.699+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:30.675+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:30.675+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:34.710+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:34.710+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.630+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:02:44.711+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:44.711+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:55.690+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:02:55.690+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:02:59.692+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:59.692+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:04.716+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:04.716+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle begin... 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.632+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[10]: FAILED! 2026-09-29T12:03:10.633+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle end 2026-09-29T12:03:14.762+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:14.762+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle begin... 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:24.730+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[11]: FAILED! 2026-09-29T12:03:24.730+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle end 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:29.742+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:29.742+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle begin... 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:34.717+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[12]: FAILED! 2026-09-29T12:03:34.718+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle end 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.631+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.632+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle begin... 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.637+0200, * ERROR: [PLC1]: CPLCHandler: Reconnect[13]: FAILED! 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle end Ich kenne mich nicht so gut aus mit dem Thema OPC. Aber bis vor dem Windows Update hat es funktioniert.. Bin mit meiner Fehlersuche langsam am Ende...!
Last updated: 2026-09-29

Post by darko7417 on When running as a service, CodesysControl doesn't write log files to the disk (and other CmpLog related issuess) CODESYS Forge talk (Post)
I run CODESYS runtime as a service and use CmpLog (the LogAdd2 function) to log different events to a file. I have done this many times before on various projects and hardware, and it works fine. On this particular system, I have CODESYS 3.5.20.40 running on a Windows 11 PC. The CODESYSControlService autostarts (with Local System credentials, the default), and the application runs fine. However, the configuration file is not read (or at least not the one that should be, or not the CmpLog section), and log files are not written to the disk. I would be thankful if anyone knew why this is happening and how to fix it. A note to CODESYS people: you must provide more information on the codesys configuration file, CODESYSControlService.exe and other major components and system behaviour. You created the service and various features (i.e. logging), but haven't explained how they work, which, in my opinion, is below standard for industrial automation software. These are my observations: - When running as a service, the config file is not read (none of them), or at least the CmpLog section is not read. I checked the log using Codesys IDE, and the CmpLog parameters are not the ones I have set in any of the config files. Which CmpLog config values does the service use, and where does it read them from? I have no idea, but it's not the config files. Here are the codesys config files I located on the PC's disk: o C:\Program Files (x86)\CODESYS 3.5.20.40\GatewayPLC\CODESYSControl.cfg (only 2 lines in this config) o C:\Program Files (x86)\CODESYS 3.5.20.40\GatewayPLC\AppDataFiles\CODESYSControlWinV3\CODESYSControl.cfg o C:\Users\SRV\AppData\Roaming\CODESYS\CODESYSControlWinV3\C4DBB537\CODESYSControl.cfg o C:\Program Files (x86)\CODESYS 3.5.20.40\GatewayPLC\tempCFG\CODESYSControl.cfg - When I run codesys as an app (e.g. by clicking the icon), this config file is read C:\Users\SRV\AppData\Roaming\CODESYS\CODESYSControlWinV3\C4DBB537\CODESYSControl.cfg and log files are written ok. The icon target is "C:\Program Files (x86)\CODESYS 3.5.20.40\GatewayPLC\CODESYSControlService.exe" -d o the -d option, I think, starts a cmd-like window showing service debug output (the output shown in log in the IDE) o the -i option, again I think, means install the service - I tried adding -d to service start parameters in the registry, but it started only once and after that it refused to start. Knowing what -d does and which other options are available would be great (e.g. can I make the service read a different config file). - Syslog UDP logging works fine in any case. - These are my CmpLog parameters ~~~ [CmpLog] Logger.0.Name=PlcLog3 Logger.0.Filter=0xFFFFFFFF Logger.0.Enable=1 Logger.0.MaxEntries=10003 Logger.0.MaxFileSize=50003 Logger.0.MaxFiles=33 Logger.0.Backend.0.ClassId=0x0000010B ;sends logger messages to SysOut Logger.0.Backend.1.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Backend.2.ClassId=0x00000135 ;sends logger messages as UDP syslog Logger.0.Type=0x314 ;Set the timestamp to RTC ~~~
Last updated: 2025-02-27

Post by francesco86 on Script python for write in a file Project information CODESYS Forge talk (Post)
Dear all, My python script can read a Codesys project and save in file the different POU, but the problem is that I don't able to read the project info from the obj list. Following of this message there is my python script. Can you help my? Best regards Francesco # encoding:utf-8 # We enable the new python 3 print syntax from __future__ import print_function import os import shutil import time import sys from datetime import datetime print("--- Saving files in the project: ---") print("sys.argv: ", len(sys.argv), " elements:") for arg in sys.argv: print(" - ", arg) if (len(sys.argv)>1): folderExportName = sys.argv[1] print(" folderExportName: ", folderExportName) exportPath = sys.argv[2]+ sys.argv[3]+ "\\"+ sys.argv[1] print(" File path: ", exportPath) # git has_repo=False #save_folder=r'E:\Tmp\ControlPlugins\ControlPlugins\Export' save_folder = exportPath if not os.path.exists(save_folder): os.makedirs(save_folder) else: a=os.listdir(save_folder) for f in a: if not f.startswith("."): sub_path= os.path.join(save_folder,f) if os.path.isdir(sub_path): shutil.rmtree(sub_path) else: os.remove(sub_path) elif f==".git": has_repo=True info={} type_dist={ '792f2eb6-721e-4e64-ba20-bc98351056db':'pm', #property method '2db5746d-d284-4425-9f7f-2663a34b0ebc':'dut', #dut 'adb5cb65-8e1d-4a00-b70a-375ea27582f3':'lib', #lib manager 'f89f7675-27f1-46b3-8abb-b7da8e774ffd':'m', #method no ret '8ac092e5-3128-4e26-9e7e-11016c6684f2':'act', #action '6f9dac99-8de1-4efc-8465-68ac443b7d08':'pou', #pou '6654496c-404d-479a-aad2-8551054e5f1e':'itf', #interface '738bea1e-99bb-4f04-90bb-a7a567e74e3a':'', #folder 'ffbfa93a-b94d-45fc-a329-229860183b1d':'gvl', #global var '5a3b8626-d3e9-4f37-98b5-66420063d91e':'prop', #property '2bef0454-1bd3-412a-ac2c-af0f31dbc40f':'tl', #textlist '63784cbb-9ba0-45e6-9d69-babf3f040511':'gtl', #global textlist '225bfe47-7336-4dbc-9419-4105a7c831fa':'dev', #device 'ae1de277-a207-4a28-9efb-456c06bd52f3':'tc', #task configuration 'f8a58466-d7f6-439f-bbb8-d4600e41d099':'m', #method with ret '261bd6e6-249c-4232-bb6f-84c2fbeef430':'gvl', #gvl_Persistent '98a2708a-9b18-4f31-82ed-a1465b24fa2d':'task', #task '085afe48-c5d8-4ea5-ab0d-b35701fa6009':'progInfo'#project information }; def save(text,path,name,tp): if not tp: tp='' else: tp='.'+tp+'.txt' with open(os.path.join(path,name+tp),'w') as f: f.write(text.encode('utf-8')) def print_tree(treeobj, depth, path): global info #record current Path curpath=path isfolder=False t='' #text tp='' #type # get object name name = treeobj.get_name(False) id = treeobj.type.ToString() if id in type_dist: tp = type_dist[treeobj.type.ToString()] #Print all type of objects #print("--Name: ", tp) else: info[id]=name if treeobj.is_device: deviceid = treeobj.get_device_identification() t = 'type='+str(deviceid.type) +'\nid=' +str(deviceid.id) + '\nver='+ str(deviceid.version) if tp == "progInfo": print("-- There is prog info, ", tp) print("-- It has textual declaration: , ", treeobj.has_textual_declaration) print("-- It has textual implementation: , ", treeobj.has_textual_implementation) print("-- It is folder: , ", treeobj.is_folder) print("-- It is children: , ", treeobj.get_children(False)) print("-- It is children len: , ", len(treeobj.get_children(False))) print("-- It is progInfo type: , ", type(treeobj.ScriptProject)) #for child in treeobj.get_children(False): # print_tree(child, depth+1,curpath) try: if treeobj.is_folder : #system.ui.prompt('folder:'+u, PromptChoice.YesNo, PromptResult.Yes) isfolder=true pass except: pass if treeobj.has_textual_declaration : t=t+'(*#-#-#-#-#-#-#-#-#-#---Declaration---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_declaration t=t+a.text if treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---Implementation---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_implementation t=t+a.text if treeobj.has_textual_declaration and not treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---NOT Implementation visible---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' if treeobj.is_task : exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.task')) if treeobj.is_libman: exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.lib')) if treeobj.is_textlist: treeobj.export(os.path.join(curpath,name+'.tl')) children = treeobj.get_children(False) if children or isfolder: if tp: curpath=os.path.join(curpath,name+'.'+tp) else: curpath=os.path.join(curpath,name) if not os.path.exists(curpath): os.makedirs(curpath) if t: save(t,curpath,name,tp) for child in treeobj.get_children(False): print_tree(child, depth+1,curpath) for obj in projects.primary.get_children(): print_tree(obj,0,save_folder) with open(os.path.join(save_folder,'ExportInfo.txt'),'w') as f: now = datetime.now() infTimeExecution = now.strftime("%Y-%m-%d %H:%M:%S") f.write("Export date and time: "+infTimeExecution + "\r\n" + str(info)) print("--- Script finished. ---") #system.ui.info('save ok') projects.primary.close()
Last updated: 2024-04-30

Post by francesco86 on Script python for write in a file Project information CODESYS Forge talk (Post)
Dear all, My python script can read a Codesys project and save in file the different POU, but the problem is that I don't able to read the project info from the obj list. Following of this message there is my python script. Can you help my? Best regards Francesco # encoding:utf-8 # We enable the new python 3 print syntax from __future__ import print_function import os import shutil import time import sys from datetime import datetime print("--- Saving files in the project: ---") print("sys.argv: ", len(sys.argv), " elements:") for arg in sys.argv: print(" - ", arg) if (len(sys.argv)>1): folderExportName = sys.argv[1] print(" folderExportName: ", folderExportName) exportPath = sys.argv[2]+ sys.argv[3]+ "\\"+ sys.argv[1] print(" File path: ", exportPath) # git has_repo=False #save_folder=r'E:\Tmp\ControlPlugins\ControlPlugins\Export' save_folder = exportPath if not os.path.exists(save_folder): os.makedirs(save_folder) else: a=os.listdir(save_folder) for f in a: if not f.startswith("."): sub_path= os.path.join(save_folder,f) if os.path.isdir(sub_path): shutil.rmtree(sub_path) else: os.remove(sub_path) elif f==".git": has_repo=True info={} type_dist={ '792f2eb6-721e-4e64-ba20-bc98351056db':'pm', #property method '2db5746d-d284-4425-9f7f-2663a34b0ebc':'dut', #dut 'adb5cb65-8e1d-4a00-b70a-375ea27582f3':'lib', #lib manager 'f89f7675-27f1-46b3-8abb-b7da8e774ffd':'m', #method no ret '8ac092e5-3128-4e26-9e7e-11016c6684f2':'act', #action '6f9dac99-8de1-4efc-8465-68ac443b7d08':'pou', #pou '6654496c-404d-479a-aad2-8551054e5f1e':'itf', #interface '738bea1e-99bb-4f04-90bb-a7a567e74e3a':'', #folder 'ffbfa93a-b94d-45fc-a329-229860183b1d':'gvl', #global var '5a3b8626-d3e9-4f37-98b5-66420063d91e':'prop', #property '2bef0454-1bd3-412a-ac2c-af0f31dbc40f':'tl', #textlist '63784cbb-9ba0-45e6-9d69-babf3f040511':'gtl', #global textlist '225bfe47-7336-4dbc-9419-4105a7c831fa':'dev', #device 'ae1de277-a207-4a28-9efb-456c06bd52f3':'tc', #task configuration 'f8a58466-d7f6-439f-bbb8-d4600e41d099':'m', #method with ret '261bd6e6-249c-4232-bb6f-84c2fbeef430':'gvl', #gvl_Persistent '98a2708a-9b18-4f31-82ed-a1465b24fa2d':'task', #task '085afe48-c5d8-4ea5-ab0d-b35701fa6009':'progInfo'#project information }; def save(text,path,name,tp): if not tp: tp='' else: tp='.'+tp+'.txt' with open(os.path.join(path,name+tp),'w') as f: f.write(text.encode('utf-8')) def print_tree(treeobj, depth, path): global info #record current Path curpath=path isfolder=False t='' #text tp='' #type # get object name name = treeobj.get_name(False) id = treeobj.type.ToString() if id in type_dist: tp = type_dist[treeobj.type.ToString()] #Print all type of objects #print("--Name: ", tp) else: info[id]=name if treeobj.is_device: deviceid = treeobj.get_device_identification() t = 'type='+str(deviceid.type) +'\nid=' +str(deviceid.id) + '\nver='+ str(deviceid.version) if tp == "progInfo": print("-- There is prog info, ", tp) print("-- It has textual declaration: , ", treeobj.has_textual_declaration) print("-- It has textual implementation: , ", treeobj.has_textual_implementation) print("-- It is folder: , ", treeobj.is_folder) print("-- It is children: , ", treeobj.get_children(False)) print("-- It is children len: , ", len(treeobj.get_children(False))) print("-- It is progInfo type: , ", type(treeobj.ScriptProject)) #for child in treeobj.get_children(False): # print_tree(child, depth+1,curpath) try: if treeobj.is_folder : #system.ui.prompt('folder:'+u, PromptChoice.YesNo, PromptResult.Yes) isfolder=true pass except: pass if treeobj.has_textual_declaration : t=t+'(*#-#-#-#-#-#-#-#-#-#---Declaration---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_declaration t=t+a.text if treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---Implementation---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' a=treeobj.textual_implementation t=t+a.text if treeobj.has_textual_declaration and not treeobj.has_textual_implementation: t=t+'(*#-#-#-#-#-#-#-#-#-#---NOT Implementation visible---#-#-#-#-#-#-#-#-#-#-#-#-#*)\r\n' if treeobj.is_task : exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.task')) if treeobj.is_libman: exports=[treeobj] projects.primary.export_native(exports,os.path.join(curpath,name+'.lib')) if treeobj.is_textlist: treeobj.export(os.path.join(curpath,name+'.tl')) children = treeobj.get_children(False) if children or isfolder: if tp: curpath=os.path.join(curpath,name+'.'+tp) else: curpath=os.path.join(curpath,name) if not os.path.exists(curpath): os.makedirs(curpath) if t: save(t,curpath,name,tp) for child in treeobj.get_children(False): print_tree(child, depth+1,curpath) for obj in projects.primary.get_children(): print_tree(obj,0,save_folder) with open(os.path.join(save_folder,'ExportInfo.txt'),'w') as f: now = datetime.now() infTimeExecution = now.strftime("%Y-%m-%d %H:%M:%S") f.write("Export date and time: "+infTimeExecution + "\r\n" + str(info)) print("--- Script finished. ---") #system.ui.info('save ok') projects.primary.close()
Last updated: 2024-04-30

Post by lzml on HTML5 visualization controls disabled on CODESYS Control for Linux SL - overlay not supported? CODESYS Forge talk (Post)
Hello, I'm developing a custom HTML5 visualization control (via the HTML5 Control Editor / Tools > Visualization Element Repository) and I'm running into what looks like a target-device limitation when trying to deploy it to CODESYS Control for Linux SL. I'd like to understand whether this is a known/expected limitation or something in my setup. Environment - CODESYS Development System: V3.5.22.0 - Target runtime: CODESYS Control for Linux SL, package version 4.15.0.0 (installed together with CODESYS Edge Gateway for Linux 4.15.0.0) - Visu system libraries (VisuElems, VisuElemsAlarm, VisuInputs, VisuNativeControl, etc.): version 4.7.0.0 - Host OS: Debian RT (minimal/base installation) - We only use WebVisu, not TargetVisu. What I did 1. Built a custom HTML5 control following the official HTML5-API-Examples pattern (.html5control.xml manifest + ElementWrapper.js + CSS), installed it successfully via the HTML5 Control Editor ("Save and Install") into the Visualization Element Repository. 2. In the Visualization Manager, enabled "Support client animations and overlay of native elements" (documented as required for HTML5 controls to work at all). 3. With the project's Device set to CODESYS Control for Linux SL, compiling/downloading fails with: "Overlay is not supported for your target visualization device." (Visualization Manager) Build stops with 1 error, download not possible. Isolating the cause - The Visualization Element Repository confirms the control is correctly installed. - With the project Device set to a Windows-based device, the HTML5 control appears and is enabled in the Toolbox as expected. - With the project Device set to CODESYS Control for Linux SL, the HTML5 control is disabled/missing from the Toolbox entirely, even though it's installed in the repository. This points to the Linux SL device description simply not declaring overlay/HTML5 support, rather than a missing package or Debian-side dependency (WebVisu itself already works fine for standard/native visualization elements on this same target). Questions 1. Does CODESYS Control for Linux SL currently support WebVisu overlay (and therefore custom HTML5 controls)? I found documentation stating overlay support for target visualizations (Windows and Linux) was added starting with CODESYS Development System V3.5.17.0, but that seems to refer to TargetVisu, and our case is WebVisu-only on a Linux runtime. 2. If not currently supported, is this on a roadmap, or is there a different Linux runtime package/edition that does support WebVisu overlay for HTML5 controls? 3. Is there any Linux-side configuration or package needed to enable this (given the check appears to happen against a static device capability declaration rather than a live server check), or is this purely a matter of the device description bundled with the current Control for Linux SL package? Thanks in advance for any pointers.
Last updated: 2026-08-05

Post by harryc on Soft Container License issue with ARM64 Linux CODESYS Forge talk (Post)
Hi, We are working to provide our customers with CODESYS operation on our hardware product ( https://elprotech.com/product/el-qe-e-quantum-edge-series/ ). I'm trying to enable a CODESYS license (Soft container) on our product running ARM64 linux. This problem am having looks similar to here: https://forge.codesys.com/forge/talk/Runtime/thread/6d29b6b4de/ and here: https://forge.codesys.com/forge/talk/Runtime/thread/a2d0c63375/; but I am not running docker, and I am not re-installing a license. This is first time install. I have CODESYS Control SL running on my device, as well as CodeMeter. I purchased a license, and installed it to the CODESYS Development system, (Tools >> License Repository) then tried to install to the device (Tools >> License Manager >> o Device >> o Soft container >> Remote [0001] >> OK. This gives me the "License Manager - Overview" dialog, and the message "Licensing info not available. There is no dongle attached to the device." Below shows the running applications, installed packages, and current content of /var/opt/codesys Also attached screenshots of the Development software as I go through the steps to install the license. # # ps | grep -e "code" -e "CodeMeter" 1391 daemon /usr/sbin/CodeMeterLin 1407 root /opt/codesys/bin/codesyscontrol.bin /etc/codesyscontrol/CODESYSControl.cfg 1442 root /opt/codesysedge/bin/codesysedge.bin /etc/codesysedge/Gateway.cfg 29229 root grep -e code -e CodeMeter # dpkg -l Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==============-=============-============-============================================================================================== ii codemeter-lite 8.20.6539.500 arm64 WIBU CodeMeter minimal runtime ii codesyscontrol 4.14.0.0 arm64 codesyscontrol based on SDK 3.5.20.40 , from Fri Nov 29 08:35:37 CET 2024 [265], Release build ii codesysedge 4.14.0.0 arm64 codesysedge based on SDK 3.5.20.40 , from Fri Nov 29 08:34:19 CET 2024 [265], Release build # ls -la /var/opt/codesys total 208 drwxr-xr-x 6 root root 4096 Nov 7 05:31 . drwxr-xr-x 1 root root 4096 Nov 6 08:33 .. -rw-r--r-- 1 root root 23515 Nov 7 07:26 .Audit.log -rw-r--r-- 1 root root 160 Nov 7 05:31 .GroupDatabase.csv -rw-r--r-- 1 root root 160 Nov 7 04:37 .GroupDatabase.csv_ -rw-r--r-- 1 root root 20736 Nov 29 2024 .SoftContainer_CmRuntime.wbb -rw-r--r-- 1 root root 1982 Nov 29 2024 .UFC_SoftContainer_CmRuntime.WibuCmLif -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv_ -rw-r--r-- 1 root root 11807 Nov 7 05:30 .UserMgmtRightsDB.csv drwxr-xr-x 6 root root 4096 Nov 6 08:30 .pki drwxr-xr-x 3 root root 4096 Nov 6 08:30 OPCUAServer drwxr-xr-x 7 root root 4096 Nov 6 08:30 PlcLogic -rw-r--r-- 1 root root 13 Nov 6 08:30 SysFileMap.cfg -rw-r--r-- 1 root root 2640 Nov 29 2024 bacstac.ini drwxr-xr-x 4 root root 4096 Nov 6 08:30 cert -rw-r--r-- 1 root root 94105 Nov 7 07:25 codesyscontrol.log # # uname -a Linux Remote 6.1.22 #5 SMP PREEMPT Tue Nov 18 11:35:46 AEST 2025 aarch64 GNU/Linux #
Last updated: 2025-12-04

Post by thommy54 on Raspi-Cam: CameraStream.project nicht zum Laufen zu bringen CODESYS Forge talk (Post)
Hallo, Ich bringe das CameraStream.project nicht zum Laufen. Ich sehe die Ursache darin, das das Beispielprogramm sehr sparsam mit Programm-Kommentaren umgeht (von der Hilfe gar nicht zu reden). Ich habe beide Varianten bei der zu ändernden Zielvariable getestet: //copy video.htm to the webserver; //the location of the webserver depends on the used Apache version as mentioned in online help hDirHtmlTest:=SysDirOpen( szDir:='/var/www', pDirInfo:= ADR(dirInfo), diMaxDirEntry:=iMaxDirEntry, szDirEntry:=szDirEntry, pResult:=ADR(iDirHtmlError)); IF (iDirHtmlError = 0) THEN SysDirClose(hDir:=hDirHtmlTest); SysFileCopy('/var/www/video.htm', '$$PlcLogic$$/Application/video.htm', ADR(dwCopySize)); ELSE .... als auch hDirHtmlTest:=SysDirOpen( szDir:='/var/www/html', pDirInfo:= ADR(dirInfo), diMaxDirEntry:=iMaxDirEntry, szDirEntry:=szDirEntry, pResult:=ADR(iDirHtmlError)); IF (iDirHtmlError = 0) THEN SysDirClose(hDir:=hDirHtmlTest); SysFileCopy('/var/www/html/video.htm', '$$PlcLogic$$/Application/video.htm', ADR(dwCopySize)); ELSE .... Die Url-Streams habe ich gelassen wie sie vorgegeben waren: urlStream := CONCAT('http://', CONCAT(sIPAddress, '/video.htm')); urlPicture := CONCAT('http://', CONCAT(sIPAddress, '/cam_pic.php')); In der Webvisu im Browser komme ich maximal dahin wie im Screeshot Video_Visu_1 zu sehen. Also scheint der Link zu video.htm zu klappen. Das der zu cam_pic.php nicht klappt, wundert mich nicht, denn es existiert nicht und wird auch nicht evtl. am rechten Ort angelegt. Ich bin mir vollkommen im Unklaren: muss da was auf dem Raspberry Pi im Hintergrund laufen , z.B. raspivid . Welcher Programmteil bedient die Cam ? Ich erkenne auch nicht, wo ein einzelnes picture entstehen soll. Wäre dankbar, wenn ich hier etwas Hilfe bekommen könnte. Evtl. gibt es Probleme mit der von mir verwendeten Codesys-Version 3.5.20.1 ? Ich benutze einen Raspberry 4 Rev.1.2. Grüße Thomas
Last updated: 2024-07-04

Post by steven-schalm on Github Actions CI/CD tasks - development topic CODESYS Forge talk (Post)
hello kevinrn, I've been looking for a solution to the CI/CD issue for a long time. Briefly about me... I am 32 and software architect for Codesys V3 and fullstack dev for web (VueJS, NestJS) in a small company in Erfurt (Germany). https://www.rex-at.de/. Through my web part, we already have CI/CD running well via GitLab (YAML-based configuration file (.gitlab-ci.yml), which defines which pipelines and jobs are executed when certain events occur) with everything you know. Stages for npm packages - prepare (GitVersion, npm install or whatever) - build (vite, tsc or whatever) - testing (vitest, jest or whatever) - deploy (npm packages) And similar for monorepo's or backend services (in NestJS) as DockerImages. For Codesys we have been building an OOP framework for years (~50 libraries now), which is currently managed via SVN and a specially written Svn-Watcher (in Python) gets commits and runs and builds everything together and deploys it to an FTP server and network drive. Why do we still have SVN? Because we are unfortunately still tied to the safety integration of Codesys and can therefore only go to SP15 at most with our controller/Eckelmann. But soon there will be an update and there will be no more obstacles to using Git. Hence my questions: 1. the basic idea is to run a local Windows Runner on some machine? 2. install Codesys on the machine where the runner is running? 3. powershell & python scripts are then used to execute builds (compile, build, sign libraries) & deploys? 4. can the Github action also be used in GitLab? ChatGPT has already told me that it's not the same, but it doesn't hurt to ask. Do you have any ideas on this? Greetings :D
Last updated: 2024-08-20

Post by timo on String nach erlaubten/unerlaubten Zeichen durchsuchen CODESYS Forge talk (Post)
Hallo, Ich bastele gerade an einer möglichst einfachen Möglichkeit mit der ich prüfen kann ob ein String Sonderzeichen enthält. Mein Ansatz ist ein ST FB mit einer Case Schrittkette. Ich vergleiche jedes Zeichen des Strings mit allen Zeichen eines vorher definierten Strings erlaubter Zeichen, der A-Z, a-z und 0-9 enthält und ggf angepasst werden kann, wenn ich weitere Zeichen erlaube. Leider wird meine j Zählervariable nicht richtig ausgeführt. Hat da jemand eine Idee? Oder gibt es eine einfachere Lösung/einen fertigen FB den ich mir anschauen kann? FUNCTION_BLOCK Sonderzeichen_Check VAR_INPUT inputString : STRING; // Zu prüfender String startCheck : BOOL; // Startsignal END_VAR VAR_OUTPUT ok : BOOL; // TRUE, wenn keine ungültigen Zeichen END_VAR VAR i : INT := 1; // Input-String Zähler j : INT := 1; // erlaubte Zeichen Zähler allowedChars: STRING := 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789'; // Erlaubte Zeichen currentChar : STRING[1]; // Aktuelles Zeichen step : INT := 0; // Schritt END_VAR CASE step OF 0: // Warten auf Start IF startCheck THEN step := 10; END_IF 10: // Initialisierungen i := 1; j := 1; ok := TRUE; // Standard: ok step := 20; 20: // Durchgehen des Eingangs-Strings IF i <= LEN(inputString) THEN currentChar := MID(inputString, i, 1); // Aktuelles Zeichen step := 30; ELSE step := 70; // Alle Zeichen ok END_IF 30: // Durchgehen der erlaubten Zeichen IF j <= LEN(allowedChars) THEN step := 40; // Zu Schritt 40 ELSE step := 60; // Ungültiges Zeichen END_IF 40: // Vergleich IF currentChar = MID(allowedChars, j, 1) THEN i := i + 1; // Nächstes Zeichen im Input step := 20; ELSE j := j + 1; // Nächstes erlaubtes Zeichen step := 30; END_IF 60: // Ungültiges Zeichen ok := FALSE; // Setze auf FALSE step := 0; 70: // Alle Zeichen ok step := 0; END_CASE
Last updated: 2025-01-20

Post by fmon on Modbus : dis- / re-connect cable: modbus does not re-start CODESYS Forge talk (Post)
Hello, I am using codesys Modbus TCP client (4.4.0.0) to communicate with a python modbus server (package pyModbusTCP). I first start my python server on the distant machine. After a fresh codesys compilation, a plc connection/transfer and a PLC run, the modbus connection is OK. Every time in this context the connection is created correctly. When I shut down the server, the modbus connection falls, that is normal. When I restart the python server, impossible to recreate the modbus connexion. With the client autoreconnection, I see on my server that the client tries to connect but unsuccesfully. I have the following message : DEBUG:pyModbusTCP.server:accept new connection from ClientInfo(address='192.168.1.20', port=33476) DEBUG:pyModbusTCP.server:Exception during request handling: NetworkError('recv return null') I tried to stop the codesys client and to restart it with these commands : Modbus_TCP_Client.xStop := True; // Or False Modbus_TCP_Client.Enable := True; // Or False Modbus_TCP_Server.Enable := True; // Or False I tried to confirm the error manually to force reconnection with: Modbus_TCP_Server_Motors.xConfirmError := TRUE; I tried also this command to STOP/RESET/START client and server (codesys side) but nothing happens : status_client := Modbus_TCP_Client.SetCommunicationState(eRequestedState := DED.DEVICE_TRANSITION_STATE.STOP); // .RESET & .START The answer of this function when executed is "status_client = NOT_SUPPORTED" It seems that is a socket problem, but I do not understand if it is on the client or server side. I tried a modbus simulator called "ananas.exe" and the result is the same. Impossible to get a modbus reconnection. What is different at the first connection and at a reconnection attempt ? Thanks for your help
Last updated: 2025-03-14

Post by trusty-squire on SysProcessCreate2 on Linux runtime CODESYS Forge talk (Post)
Hi, I'm trying to launch a continuously running python script from Codesys and monitor the script status inside the Codesys runtime (running on a Linux enviroment). For now I'm testing with the below to emulate a continuously running Python script: #test.py i = 0 while True: i += 1 I'm able to successfully run the script using SysProcessExecuteCommand2 (I can see the Python process running in the task manager). However, this "freezes" the Codesys execution of the task - it sits on that command and will not continue until the Python script ends. I've proven this works by using the task monitor to kill the process, then Codesys continues on happily through the task. What I want to do is use SysProcessCreate2 to set up the Python script as a background task and monitor the process using SysProcessGetState. This always results in the error "ERR_OPERATION_DENIED". I know that I'm able to execute commands (as above), so my config should be correct. Is SysProcessCreate2 functional on a Linux environment? Is there something in the config file I'm missing? Here's my "working" code that uses SysProcessExecuteCommand2: VAR bTest : BOOL; sCommand : STRING := '/usr/bin/python3 /var/opt/codesys/PlcLogic/Application/test.py'; refCommand : REFERENCE TO STRING REF= sCommand; sOutput : STRING; refOutput : REFERENCE TO STRING REF= sOutput; result : RTS_IEC_RESULT; END_VAR IF bTest THEN SysProcessExecuteCommand2( pszCommand:= refCommand, pszStdOut:= refOutput, udiStdOutLen:= SIZEOF(sOutput), pResult:= ADR(result) ); bTest:= FALSE; END_IF And here's the code that always results in the ERR_OPERATION_DENIED error: VAR bTest : BOOL; sApp : STRING := '/usr/bin/python3'; sCommand : STRING := '/var/opt/codesys/PlcLogic/Application/test.py'; refApp : REFERENCE TO STRING REF= sApp; refCommand : REFERENCE TO STRING REF= sCommand; hResult : SysProcess.RTS_IEC_RESULT; hHandle : SysProcess.RTS_IEC_HANDLE; END_VAR IF bTest THEN hHandle := SysProcessCreate2( pszApplication:= refApp, pszCommandLine:= refCommand, ulFlags:=SYSPROCESS_CREATEFLAG_HIDDEN, pResult:= ADR(hResult) ); bTest:= FALSE; END_IF Here's the relevant section from the config file at /etc/codesyscontrol/CODESYSControl.cfg: [SysProcess] Command=AllowAll Appreciate any support or ideas. Thanks!
Last updated: 2025-03-16

Post by fmon on Modbus TCP client reconnection problem CODESYS Forge talk (Post)
Hello, I am using codesys Modbus TCP client (4.4.0.0) to communicate with a python modbus server (package pyModbusTCP). I first start my python server on the distant machine. After a fresh codesys compilation, a plc connection/transfer and a PLC run, the modbus connection is OK. Every time in this context the connection is created correctly. When I shut down the server, the modbus connection falls, that is normal. When I restart the python server, impossible to recreate the modbus connexion. With the client autoreconnection, I see on my server that the client tries to connect but unsuccesfully. I have the following message : DEBUG:pyModbusTCP.server:accept new connection from ClientInfo(address='192.168.1.20', port=33476) DEBUG:pyModbusTCP.server:Exception during request handling: NetworkError('recv return null') I tried to stop the codesys client and to restart it with these commands : Modbus_TCP_Client.xStop := True; // Or False Modbus_TCP_Client.Enable := True; // Or False Modbus_TCP_Server.Enable := True; // Or False I tried to confirm the error manually to force reconnection with: Modbus_TCP_Server_Motors.xConfirmError := TRUE; I tried also this command to STOP/RESET/START client and server (codesys side) but nothing happens : status_client := Modbus_TCP_Client.SetCommunicationState(eRequestedState := DED.DEVICE_TRANSITION_STATE.STOP); // .RESET & .START The answer of this function when executed is "status_client = NOT_SUPPORTED". Is it normal ? It seems that is a socket problem, but I do not understand if it is on the client or server side. I tried a modbus simulator called "ananas.exe" and the result is the same. Impossible to get a modbus client reconnection. What is different at the first client connection and at a reconnection attempt ? Thanks for your help
Last updated: 2025-03-17

Post by jeindhoven on Deploying to raspberry pi 5 hangs CODESYS Forge talk (Post)
Hi CoDeSys support forum, hope that this is the correct place to ask this. Might be double as i am new to Codesys and dont know all terminology. I am trying to test Codesys with a virtual plc on a raspberry pi 5. Already figured that i need Tools -> Deploy Control SL, enter Communication parameters. Codesys says "Connected". Then tab "Deployment", there i select "CODESYS Control for Raspberri Pi SL" and "4.16.0.0 (all)". Click "Install" and the gui turns grey and unresponsive. The titlebar says "Untitled1.project - CODESYS (Not Responding)" as well. Restarting Codesys and checking shows no package was installed. How to deploy the runtime? Thank you in advance for your time. Edit: After some patience, an error showed up: "Error when sending ssh heartbeat: Session operation has timed out" "Error installing codesyscontrol" Any pointers to what remote command might have failed, or log of some sort, would be welcome. Software versions: Codesys version 3.5.21.10 Raspberry pi 5 (deployment machine): $ uname -a Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye $ apt list --installed | grep openssh-server openssh-server/oldstable,now 1:8.4p1-5+deb11u3 arm64 Development machine: $ uname -a Linux 2B 6.1.0-35-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.137-1 (2025-05-07) x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 12 (bookworm) Release: 12 Codename: bookworm VirtualBox Version 7.0.26 r168464 (Qt5.15.8) Virtual OS: Windows 10 Pro 64-bit (10.0, Build 19045) .NET version 4.0.30319.42000
Last updated: 2025-06-22

Post by rajatdas2005 on Codesys Virtual control SL CODESYS Forge talk (Post)
Dear All, This is regarding Codesys Virtual control SL demo version. I am facing one issue. First I will describe the steps what I have followed till now. 1. In a PC I have Windows OS. Here Codesys IDE is installed, and also using the installer option of IDE I have also installed Codesys Virtual control SL. 2. A edge-gateway is also running in the same windows PC as local host. 3. Next I have a seperate PC with Ubuntu OS with docker installed. This machine is in the same network. 4. Now I have created a project in Windows machine using device "Codesys Virtual control SL". 5. In the Ubuntu machine I am running the Codesys Virtual control SL as docker and it is using the ubuntu machine network only. 6. Next using the localhost edge-gateway when I am searching the virtual control SL docker it is able to detect it. (screenshot attached) 7. But after creating the creadentials it is telling No Device is responding. 8. I have also checked the wireshark logs and able to see that in destination port 11740 data is coming. 9. From windows PC telnet ip 11740 is also working. 10. Ping is also working ===========================================LOGS ========================= sudo ss -tlnp | grep -E "(443|1217|4840|8080|11740)" LISTEN 0 10 10.135.114.142:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=21)) LISTEN 0 10 172.18.0.1:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=24)) LISTEN 0 10 172.17.0.1:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=23)) LISTEN 0 10 127.0.0.1:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=26)) LISTEN 0 10 192.168.122.1:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=22)) LISTEN 0 5 0.0.0.0:11740 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=20)) LISTEN 0 128 0.0.0.0:8080 0.0.0.0: users:(("python3",pid=1280,fd=4)) LISTEN 0 10 172.19.0.1:4840 0.0.0.0: users:(("codesyscontrol.",pid=41864,fd=25))
Last updated: 2025-08-06

Post by mariussandu on OPC-UA CODESYS Forge talk (Post)
Hello, I am experiencing an intermittent OPC UA server issue on CODESYS Control for Raspberry Pi SL 4.21.0.0. Runtime information: codesyscontrol 4.21.0.0 Raspberry Pi 4 Model B Rev 1.1 - 4Gb OPC UA Server: CmpOPCUAServer 3.5.22.x Server IP: 192.168.0.110 OPC UA endpoint: opc.tcp://192.168.0.110:4840 The main OPC UA client is Node-RED running on 192.168.0.111. This has an active subscription with some tags and also some write functions active. The system normally works correctly for a period, but at some time the OPC UA communication stopped. Node-RED started reconnecting continuously but could not reconnect. I also tried connecting using UaExpert, but UaExpert returned: BadTimeout At the same time, the PLC application itself was still running. Before restarting CODESYS, I captured the TCP connections. The OPC UA server was still listening: tcp 11 0 192.168.0.110:4840 0.0.0.0:* LISTEN However, there were many connections from the Node-RED client stuck in CLOSE_WAIT: 192.168.0.110:4840 192.168.0.111:45008 CLOSE_WAIT 192.168.0.110:4840 192.168.0.111:53678 CLOSE_WAIT 192.168.0.110:4840 192.168.0.111:44032 CLOSE_WAIT 192.168.0.110:4840 192.168.0.111:36612 CLOSE_WAIT 192.168.0.110:4840 192.168.0.111:45012 CLOSE_WAIT 192.168.0.110:4840 192.168.0.111:36592 CLOSE_WAIT ... Some of these sockets also had data remaining in Recv-Q, for example: Recv-Q = 61 Recv-Q = 121 There were roughly 15–20 OPC UA connections in CLOSE_WAIT. Restarting only the CODESYS runtime immediately restored OPC UA communication. After restart: LISTEN 0 10 192.168.0.110:4840 and both Node-RED and UaExpert can connect normally again. There are no obvious OPC UA errors during startup or in log. On RPI 2 I had a memory leak regarding OPCUA so I had to upgrade to RPI4. What can I do in this case? Thank you!
Last updated: 2026-08-26

Post by thierry-b on Blocking UDP ports 1740–1743 and 22350 to disable CODESYS network scan (startup + device discovery) CODESYS Forge talk (Post)
Hello, I am currently investigating the network behavior of CODESYS 3.5 (IDE + Gateway) in environments where the engineering workstation is connected to a very large /16 network. In such networks, the automatic device scan performed at IDE startup (and the manual “Scan Network” device discovery) can cause significant delays or freezes, due to the broadcast‑based discovery mechanism. After analyzing the traffic with Wireshark, I identified that the IDE uses the following UDP ports: 1740 – broadcast discovery 1741 – handshake / responses 1742 – fallback discovery 1743 – fallback handshake 22350 – additional runtime / gateway communication (WAGO, debug, extended discovery) To prevent the IDE from scanning the large /16 network, I tested blocking these ports in both directions (IN/OUT) on the network interface connected to the /16 segment (while keeping them open on the OT /24 network interface). Result: When UDP 1740, 1741, 1742 and 1743 are blocked on the IT interface, the IDE no longer sends any discovery traffic on that interface. The IDE still works normally on the OT interface (device discovery, online mode, download, etc.). Blocking port 22350 does not seem required to stop the scan, but I included it for completeness. My question: => Can you confirm that blocking UDP ports 1740, 1741, 1742, 1743 (and optionally 22350) on a specific network interface is a valid and supported way to completely disable the CODESYS IDE network scan on that interface (both at startup and during manual device discovery)? I am not trying to block communication with controllers on the OT network — only to prevent the IDE from scanning the large /16 IT network. Any confirmation or additional technical details about the discovery mechanism would be greatly appreciated. Thank you.
Last updated: 2026-03-31

Post by wold on CodeMeter Network Server: Keep runtime dongle local-only and export only a second CmStick CODESYS Forge talk (Post)
Hello, I am running a CODESYS Control Runtime on a Raspberry Pi. Two CmSticks are connected to the same system: CmStick A - Runtime license - MultiCore license - KNX license CmStick B - Engineering / Developer licenses My goal is: The runtime on the Raspberry Pi shall use CmStick A locally. Licenses from CmStick A shall NOT be provided by the CodeMeter Network Server. Only licenses from CmStick B shall be available to remote network clients. During troubleshooting I observed that the CodeMeter Network Server collects licenses from both CmSticks. The KNX license appears to be local-only, but the runtime and multicore licenses of the same dongle are still visible through the server. I would like to know if a supported configuration exists for the following scenario: One CmStick remains strictly local to the runtime. A second CmStick on the same machine is exported through the CodeMeter Network Server. Questions: Is it possible to exclude a specific CmStick from being exported by the CodeMeter Network Server? Can this be configured via License Access Permissions (ACL), WebAdmin, or another mechanism? Can export rules be applied per CmStick, per Firm Code, or per Product Code? If supported, could you provide a configuration example or a reference to the relevant documentation? The reason for asking is that after removing a separately installed CodeMeter server component and returning to a local-only setup, the runtime licensing behaviour became stable again. Therefore I am looking for the officially supported way to keep the runtime dongle local while still providing engineering licenses from a second dongle over the network. Thank you.
Last updated: 2026-08-02

Post by kishan on SMC_Interpolator / CNC Abort – ControlAxisByPos Sometimes Remains Busy and Axis Continues Moving CODESYS Forge talk (Post)
Hello, I am working with CODESYS SoftMotion CNC using a preprocessing chain, SMC_Interpolator, and SMC_ControlAxisByPos for controlling the CNC axes. I have noticed an issue when aborting CNC execution. When I execute the Abort command, I abort both the CNC preprocessing blocks and SMC_Interpolator. Normally the CNC process stops correctly. However, occasionally after the abort: SMC_Interpolator has already been aborted. CNC preprocessing has also been aborted/reset. But SMC_ControlAxisByPos.bBusy remains TRUE. The corresponding physical axis can still continue moving for some distance. This does not happen every time. My basic sequence is similar to: G-code / CNC preprocessing ↓ SMC_Interpolator ↓ Transformation ↓ SMC_ControlAxisByPos ↓ SoftMotion Axis When the operator requests CNC Abort, I set the Abort inputs of the interpolator and preprocessing function blocks. My questions are: Does SMC_Interpolator.bAbort only stop/reset the interpolator, or should it also stop the motion currently being executed by SMC_ControlAxisByPos? Can SMC_ControlAxisByPos remain Busy after the interpolator has been aborted? If bAvoidGaps = TRUE, could SMC_ControlAxisByPos still be trying to reach the last fSetPosition using the fGapVelocity / fGapAcceleration / fGapDeceleration settings after the interpolator has stopped? What is the recommended sequence for safely aborting a running CNC program? For example, should the sequence be something like: Stop / Abort Interpolator Disable SMC_ControlAxisByPos Execute MC_Stop for all physical axes Wait until all axes reach standstill Abort/reset preprocessing blocks and CNC queues Reset CNC state Re-enable axis controllers Or is there a recommended CODESYS CNC method for performing a complete CNC Abort? I would especially like to understand why SMC_ControlAxisByPos.bBusy can occasionally remain TRUE and continue moving the axis even though the interpolator and preprocessing blocks have already been aborted. CODESYS SoftMotion CNC is being used with real EtherCAT servo axes. Any explanation about the correct abort/stop sequence would be appreciated.
Last updated: 2026-09-25

Post by timvh on From target start Win OnScreenKeyboard CODESYS Forge talk (Post)
Check the CODESYS log. Do you see something like this?: 2026-10-28T14:27:50.602Z: Cmp=SysFile, Class=2, Error=39, Info=4, pszInfo=!!!! Access denied to 'C:/Windows/System32/osk.exe' due to ForceIecFilePath 2026-10-28T14:27:50.602Z: Cmp=SysFile, Class=1, Error=0, Info=0, pszInfo= To grant access, this path may be configured as a PlaceholderFilePath PS, if you give an irritating, or annoying or blaming answer, I will never try to help you again. Some additional info... do you run the Control Win as user, or as service. Test it first by running it as a user, else check the info that Claude gave me as suggestion (not tested): Watch out: the keyboard may not appear CODESYS Control Win normally runs as a Windows service. Windows keeps services in a separate, invisible session (session 0). The command then succeeds, but nobody sees the keyboard. You can check this in Task Manager: if osk.exe runs under the user SYSTEM, this is the cause. A reliable workaround uses the Windows Task Scheduler: Create a task named ShowOSK that starts C:\Windows\System32\osk.exe with “Run only when user is logged on” checked. That option makes it open on the user’s desktop. Have the PLC start that task instead of osk.exe: iecst sApp := 'C:\Windows\System32\schtasks.exe'; sArgs := 'schtasks /run /tn "ShowOSK"'; The command line usually repeats the program name as the first argument. 3. Whitelist it in the config: Command.1=C:\Windows\System32\schtasks.exe
Last updated: 2026-10-28

Post by struccc on Application failing to boot after system reboot CODESYS Forge talk (Post)
I started to experience the same issue, after upgrading to 3.5.19 , and still persists with 3.5.20.3 , using CodesysControlWinV3 x64 on Windows. Unfortunately, this is a live application, normally it is running for months without interruption - so it was a surprise at the last cold start... It was not possible to go online with the original version, so I couldn't see the application, or system status, just the log message. First time I manually clean the Application from the PlcLogic directory (there was no coredump file in there), then I could start the runtime service, and do a fresh download, and set the bootproject. I could not try a cold system reboot - it's in a 24/7 production environment, and I was under heavy pressure to start... What I did, I have created a backup from the * complete * runtime directory, from the failed, and fixed version - before and after download. This directory in my case C:\ProgramData\CODESYS\CODESYSControlWinV3x64\55096128 - At the next shutdown, it was sufficient to copy back this backup completely, and could start the runtime service afterwards. Ugly, but local staff with some skills can do it without programming tool... I don't store any live data, configuration, log files, persistent data in this directory - the only reason I need this is to edit the CodesysControl... .cfg file.... And to see the logfiles in emergencies like this. The application concerned doesn't use any retain area. - exactly for these reasons - Maybe that is causing the problem with the newer runtime versions As far as I see, this problem occurs only if the power of the Windows PLC is interrupted without a proper shutdown. Unfortunately, this can happen sometimes. The newer versions, seems tp modify CodesysControl.cfg on the fly, and register the applications, and bootproject information after download. (I don't really see CodesysControl.cfg a proper location for this... but that's just my feeling) So now I had a look at CodesysCotrol.cfg on my laptop and I found: [CmpRetain] ;Retain.SRAM.Size=0x200200 ;Retain.SRAM.Address=0xFA3C5776 ;SimulateSRAM=1 [CmpApp] ;Bootproject.CreateOnDownload=0 ;Bootproject.StoreOnlyOnDownload=0 ;Bootproject.InvalidateByRename=1 ;Bootproject.InvalidateBySetting=1 ;Bootproject.InvalidateNever=0 ;PersistentForce=0 ;RetainType.Applications=InSRAM ;RetainType.Applications=OnPowerfail ;RetainType.Applications=None ;Exception.Hardware.GlobalStop=1 Application.1=MyTestAppNoRetain The last line appeared after download and boot project creation. Maybe... Should set RetainType.Applications=None? I wonder about all these settings, but... Will write separately about it. I hope this helps a little...
Last updated: 2024-11-21

Post by jonasz on Device diagnosis ( EtherCAT IO card ) CODESYS Forge talk (Post)
Hi, I'll link to the topic not wanting to start a new one. In the application I am building, I wanted to use the diagnostics described in the CAA Device Diagnosis library. In principle, everything is ok, except for the elements related to ModbusTCP. Despite the fact that ModbusTCP is taken into account in the documentation, it is not recognised via the interfaces. FUNCTION_BLOCK NET_HW_DIAG VAR_INPUT END_VAR VAR_OUTPUT END_VAR VAR (* Referencja do struktury z danymi dla HMI ASTRAADA.*) Visu: REFERENCE TO VISU; (* Wskaźnik na mastera EtherCAT.*) pEtherCATMaster : POINTER TO IoDrvEtherCAT; (* Wskaźnik na slave EtherCAT.*) pEtherCATSlave : POINTER TO EtcSlave; (* Interfejs dla węzła w drzewie urządzeń.*) _itfNode: DED.INode; (* Ogólny interfejs magistrali. Zapewnia podstawowe informacje o magistrali polowej.*) _itfBus: DED.IBus; (* Interfejs urządzenia. Zapewnia rozszerzone informacje o urządzeniu (magistralowym).*) _itfDevice2: DED.IDevice2; (* Ogólny interfejs magistrali. Zapewnia podstawowe informacje o magistrali polowej.*) _itfStack: DED.IStack; (* Numer węzła w drzewie urządzeń.*) uiNodes: UINT; (* Operator jest rozszerzeniem normy IEC 61131-3. W czasie wykonywania operator wykonuje konwersję typu odwołania do interfejsu na inny typ. Operator zwraca wynik BOOL. Wartość TRUE oznacza, że CODESYS pomyślnie wykonał konwersję. *) xQueryResultBus: BOOL; xQueryResultDevice2: BOOL; xQueryResultStack: BOOL; (* Struktura danych dotyczących węzłów w drzewie urządzeń.*) NetHwDiag: NW_HW_STAT; ModbusTcpClientDeviceInfo: IoDrvModbusTCP.DED.DEVICE_INFO; ModbusTcpClientDeviceState: IoDrvModbusTCP.DED.DEVICE_STATE; ModbusTcpDeviceInfo: IoDrvModbusTCP.DED.DEVICE_INFO; ModbusTcpDeviceState: IoDrvModbusTCP.DED.DEVICE_STATE; END_VAR (* Pobranie wskaźników dla pierwszego mastera i pierwszego slave w sieci EtherCAT.*) pEtherCATMaster := g_pFirstMaster; pEtherCATSlave := pEtherCATMaster^.FirstSlave; (* Diagnostyka sieci EtherCAT.*) pEtherCATMaster := g_pFirstMaster; pEtherCATSlave := pEtherCATMaster^.FirstSlave; NetHwDiag.xConfigFinished := pEtherCATMaster^.xConfigFinished; NetHwDiag.xDistributedClockInSync := pEtherCATMaster^.xDistributedClockInSync; NetHwDiag.xError := pEtherCATMaster^.xError; NetHwDiag.xSyncInWindow := pEtherCATMaster^.xSyncInWindow; NetHwDiag.sLastMessage := pEtherCATMaster^.LastMessage; NetHwDiag.LastError := pEtherCATMaster^.LastError; (* Diagnostyka drzewa urządzeń.*) uiNodes := 0; _itfNode := DED.GetRoot(); REPEAT NetHwDiag.asDeviceName[uiNodes] := DED.GetDeviceNameString(itfNode := _itfNode); xQueryResultBus := __QUERYINTERFACE(_itfNode,_itfBus); IF xQueryResultBus THEN _itfBus.GetBusInfo(buiInfo := NetHwDiag.aBusInfo[uiNodes]); NetHwDiag.aBusState[uiNodes] := _itfBus.GetBusState(); END_IF xQueryResultDevice2 := __QUERYINTERFACE(_itfNode,_itfDevice2); IF xQueryResultDevice2 THEN _itfDevice2.GetDeviceInfo(deiInfo := NetHwDiag.aDeviceInfo[uiNodes]); NetHwDiag.aDeviceState[uiNodes] := _itfDevice2.GetDeviceState(); IF pEtherCATSlave <>0 THEN pEtherCATSlave^(); IF pEtherCATSlave^.SlaveAddr = NetHwDiag.aDeviceInfo[uiNodes].idSystem THEN NetHwDiag.aAlStatus[uiNodes] := pEtherCATSlave^.ALStatus; pEtherCATSlave := pEtherCATSlave^.NextInstance; END_IF END_IF ELSE xQueryResultStack := __QUERYINTERFACE(_itfNode,_itfStack); IF xQueryResultStack THEN _itfStack.GetDeviceInfo(deiInfo := NetHwDiag.aDeviceInfo[uiNodes]); NetHwDiag.aDeviceState[uiNodes] := _itfStack.GetDeviceState(); END_IF END_IF uiNodes := uiNodes + 1; _itfNode := DED.GetNextNode(_itfNode); UNTIL _itfNode = 0 END_REPEAT (* Diagnostyka Modbus.*) Modbus_TCP_Client.GetDeviceInfo(deiInfo := ModbusTcpClientDeviceInfo); ModbusTcpClientDeviceState := Modbus_TCP_Client.GetDeviceState(); PAC_3200T.GetDeviceInfo(deiInfo := ModbusTcpDeviceInfo); ModbusTcpDeviceState := PAC_3200T.GetDeviceState(); Of course, you can take the easy way out and refer directly to the devices, but I wanted a reusable component. Any constructive help is very welcome Best regards Jonasz
Last updated: 2025-07-15

<< < 1 .. 147 148 149 150 > >> (Page 149 of 150)

Showing results of 3729

Sort by relevance or date