Post by tk096 on SMC_ReadNCFile2 is always busy ^{CODESYS Forge talk (Post)}
Hi, the subsequent interpreter should report an error? The reader is just reading the file without checking the syntax.
Last updated: 2025-06-17

Navigating the Modern Educational Landscape: The Rise of Strategic Academic Support ^{CODESYS Forge talk (Thread)}
Navigating the Modern Educational Landscape: The Rise of Strategic Academic Support
Last updated: 2025-09-09

Can't get the IEC var address correcttly when using the function "IecVarAccGetAddress 2" ^{CODESYS Forge talk (Thread)}
Can't get the IEC var address correcttly when using the function "IecVarAccGetAddress 2"
Last updated: 2018-12-25

Warning: the number of slave has changed or is different from the configuration ^{CODESYS Forge talk (Thread)}
Warning: the number of slave has changed or is different from the configuration
Last updated: 2017-09-11

MC_Home function block is not initiating homing sequence on the drive all the times ^{CODESYS Forge talk (Thread)}
MC_Home function block is not initiating homing sequence on the drive all the times
Last updated: 2022-08-25

How do you find the PID of the process using http://127.0.0. ^{CODESYS Forge talk (Thread)}
How do you find the PID of the process using http://127.0.0.
Last updated: 2008-10-31

Is there any way to get the name of the current action... pou... ^{CODESYS Forge talk (Thread)}
Is there any way to get the name of the current action... pou...
Last updated: 2017-03-20

How to get the SD card Image for the Raspberry Pi ^{CODESYS Forge talk (Thread)}
How to get the SD card Image for the Raspberry Pi
Last updated: 2015-12-21

How to slow down the clock of the main execution program? ^{CODESYS Forge talk (Thread)}
How to slow down the clock of the main execution program?
Last updated: 2011-07-18

the idea of design pattern stemed from the computer world ^{CODESYS Forge talk (Thread)}
the idea of design pattern stemed from the computer world
Last updated: 2007-05-10

Exceeded the EtherCAT task cycle time when the controller is rebooted ^{CODESYS Forge talk (Thread)}
Exceeded the EtherCAT task cycle time when the controller is rebooted
Last updated: 2023-01-12

Access the excel file and Change the description based on cell requirement. ^{CODESYS Forge talk (Thread)}
Access the excel file and Change the description based on cell requirement.
Last updated: 2017-10-07

How to change the Port for the Webserver / cannot access webvisu ^{CODESYS Forge talk (Thread)}
How to change the Port for the Webserver / cannot access webvisu
Last updated: 2019-06-17

Where can I see the available addresses or the auto declared ones? ^{CODESYS Forge talk (Thread)}
Where can I see the available addresses or the auto declared ones?
Last updated: 2021-11-14

[SOLVED] Install ESI file: Index was outside the bounds of the array ^{CODESYS Forge talk (Thread)}
[SOLVED] Install ESI file: Index was outside the bounds of the array
Last updated: 2017-12-15

Stu.StrTrimEndA - delete the non-blank character if the number of it is one. ^{CODESYS Forge talk (Thread)}
Stu.StrTrimEndA - delete the non-blank character if the number of it is one.
Last updated: 2022-09-03

VisuFbComboBoxInteger.HanldeOpen: The element id for the input position cannot be determined ^{CODESYS Forge talk (Thread)}
VisuFbComboBoxInteger.HanldeOpen: The element id for the input position cannot be determined
Last updated: 2021-07-26

How do you change the 'read offset' of a Modbus channel on the fly? ^{CODESYS Forge talk (Thread)}
How do you change the 'read offset' of a Modbus channel on the fly?
Last updated: 2021-04-14

Post by timvh on Add licence ^{CODESYS Forge talk (Post)}
The Epis controller should support the CodeMeter driver to be able to access the license containers on the CODESYS Key.
Last updated: 2024-01-14

Could not save the project: Could not find part of the path ^{CODESYS Forge talk (Thread)}
Could not save the project: Could not find part of the path
Last updated: 2026-06-10

Post by konstantin on CAM Motion Recover after STO ^{CODESYS Forge talk (Post)}
Hello, one of the projects I work on is about a racetrack collator with two independent belts on it - two different servo motors. Both motors share the same mechanical frame and there is a train on a belt that collects items from the input conveyor. The way the motion is performed is the following - there is a virutal master axis and both real axis are synchronised with different cam motion profiles. The problem is when an STO is triggered on any of the slave axis, the synchronization process starts from position 0 of the slaves. How can I force the slaves to retain their current position until the master passes their position? Then the slaves should catch up with the master according to the profile, the slaves should not start synchronization from 0 position. Best Regards Konstantin Kolev
Last updated: 2026-02-12

Post by gunstr on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
I now tried to install 4.17.0.0 on a fully clean installations: A brand new RPi 4B Install latest Raspberry Pi OS Lite, Release date 13 May 2025, 64bit run sudo apt update && sudo apt full-upgrade When asked - Select to install the updated version of '/etc/initramfs-tools/initramfs.conf' Install CODESYS Control for Raspberry Pi SL. version 4.17.0.0 Log output: [INFORMATION] Connected successfully! [INFORMATION] Successfully connected to target (192.168.0.197) [WARNING] No supported container engine found on device. You have to install a supported container engine to use Virtual Control. Please contact the Administrator of the device. [WARNING] Error detecting container architecture [INFORMATION] Finished reading device information [ERROR] Error output: /var/lib/dpkg/info/codesyscontrol.postinst: 88: check_legacy_extensionapi_folder: not found [INFORMATION] Standard output: Selecting previously unselected package codesyscontrol. [INFORMATION] Standard output: (Reading database ... 76772 files and directories currently installed.) [INFORMATION] Standard output: Preparing to unpack .../codesyscontrol_raspberry_4.17.0.0_all.deb ... [INFORMATION] Standard output: Unpacking codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: Setting up codesyscontrol (4.17.0.0) ... [INFORMATION] Standard output: make config rw [INFORMATION] Standard output: set folder permissions [INFORMATION] Standard output: prepare permissions [INFORMATION] Standard output: check legacy extension api folder [INFORMATION] Standard output: create and install daemon [INFORMATION] Standard output: codesyscontrol started [WARNING] Unable to detect Raspberry Pi Architecture. Setting armv6l as default, you can change this through the settings panel. [INFORMATION] Standard output: codesyscontrol stopped [ERROR] Expected exit value of command failed: expected 0, received 1 [WARNING] Error setting the Raspberry Pi Architecture [ERROR] Error installing codesyscontrol If I read the log correctly the control is actually installed but cannot start. I'm running out of ideas how to proceeed now, any suggestions are welcome.
Last updated: 2025-09-03

Post by dsa28 on EL6910 as a PROFIsafe F-Host in Codesys ^{CODESYS Forge talk (Post)}
Hello All, Does anyone have experience configuring a PROFIsafe communication between EL6910 (F-Host) and and a F-Device in Codesys? I would expect that the PROFIsafe configuration process would be pretty similar as the FSoE configuration. Although, when an F-Device is included under PN-Controller, Codesys doesn't allocate a PROFIsafe logical device automatically under EL6910, as it happens when a FSoE slave is added under EtherCAT master. I thank anyone in advance who can help me on this.
Last updated: 2024-12-05

Post by bruno-roth on Read "Homed" status from EtherCAT drive ^{CODESYS Forge talk (Post)}
Hello, the information if your axis is already homed you could only find out direct from your Slave. In DS402 status there is no Bit defined. But some manufacturer of Drives use some optional bits or status. E.g. if you have Schneider Electric LXM32 Servo you will find this information in Bit 15. You have to check the manual of your used Servo-Drive f this information is provided in any object and then read it out with SDO.
Last updated: 2025-01-08

Post by dkugler on Codesys SVN ^{CODESYS Forge talk (Post)}
Don't set on SVN. The service phase has started in March 2024 and will be discontinued in 2027. We actually use SVN and have to switch to GIT in the future. As I informed, there is no way of getting a single SVN or GIT licence. I' dont understand, why Codesys forces us customers to pay for an expensive Professional Edition paket from year to year using only one part of it! If you find a way to buy a single licence, let me know.
Last updated: 2024-04-29

Sort by relevance or date