Post by pernockham on Control for linux SL, 4.14.0.0 -> 4.15.0.0 breaks web page access. URL requires authentication ^{CODESYS Forge talk (Post)}
After enabling user management, then reverting to "legacy mode" for visu, the web is responding again also for versions later than 4.14.0.0.
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
The structure should be the same independent of which runtime version. Im using Codesys control for linux SL. Ie, add an ethernet device, then profinet controler then phoenix PN bus coupler.
Last updated: 2025-09-09

Post by ranadheer on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
Thankyou TimvH ,while searching in every device about the component it is same like above screenshot,and i crosscheck with the device repository but devices are available here.
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
You should use PLCnext if your device-hw is a PLCnext-un it. As I understand it you are using "CODESYS Control Win V3 x64".
Last updated: 2025-09-09

Post by ahmedbadawi10 on Codesys Trend Problem ^{CODESYS Forge talk (Post)}
I have control win v3 with simulation and a small program with function to convert analog values to percentages, I need to show these percentages in a trend chart, but nothing is shown in the trend as you see in snips attached! thanks in advance
Last updated: 2025-09-16

Post by pernockham on Pointer/reference to Codesys trend recording object? ^{CODESYS Forge talk (Post)}
I have a Hmi that acts as an interface for many (mostly identical) units. This is managed by a sort of "mux" where you select which unit that should be presented on the HMI. Backbone is solved by a HMI-gvl defined as reference/pointer to "unit-data", which then can be set to the individual units. While this works for most data I still have not sorted how to solve this for the trend recordings. One solution would be to have already "mux:ed" data values as source for the/one trend. However then the trend would contain data from different units/sources which could/will cause confusion. If its possible to "clear" this can be mitigated. Possibly let the trend have its own "mux-selector" (ie, the hmi are focusing on unit#3 however trend data is locked on unit#5), that could also work.. Or, let each unit have its own trend recording, which is focused if the unit is "selected". Can I reach the trend recording objects programmatically (those defined in the device tree)? Ie, can I use a "reference/pointer to these trend recording objects"? There is a field "data source" in the trend properties dialog which seems to resemble what Im looking for? But Im not sure if I can use it in some way, I cannot change anything in this field it only says <local application="">. </local>
Last updated: 2025-09-16

Post by reinier-geers on sysproces create out of V 3.5.20.5 ^{CODESYS Forge talk (Post)}
Ive update a project 3.5.9.2 to 3.5.20.5 but now im missing parts of a library. Sysprocess. Sysprocesscreate Where can i find it ?
Last updated: 2025-09-16

Post by dkugler on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
if this happens I go to --> Build --> Generate code then there exists a IDE Code and a PLC/API code and comparison before download is possible. Give it a try?
Last updated: 2025-09-18

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi gseidel, Thanks a lot. My softmotion is 4.18,so the SM3_Basic version is 4.18 by default. When I change the version of SM3_Basic to 4.17,complie works good then. Thank you for your kindness.
Last updated: 2025-09-22

Post by zatalian on codesys installer 2.5.0.0 ^{CODESYS Forge talk (Post)}
Is it just me, or is the option to import a configuration file for the add-ons missing in the new version of codesys installer?
Last updated: 2025-09-24

Post by gseidel on Arcs intersection ^{CODESYS Forge talk (Post)}
Hi blitz, the G1 sentences N50, N70, and N110, which have length 0, lead to a stop of interpolation between the arcs. If you remove these lines, SMC_SmoothPath works (I tried it). Bst regards, Georg
Last updated: 2025-09-24

Post by leonekreiger on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Confirmed. Variable types that should be excluded: BIT Pointer Interfaces Constants Arrays of non-persistent data types Docs: https://content.helpme-codesys.com/en/CODESYS%20Application%20Composer/ac_pm_definition_persistent_variables.html Thank you, I have successfully fixed that error.
Last updated: 2025-09-26

Post by dkugler on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
you have visited https://en.estun.com/?list_139/1380.html and registered and there are no ESI files at data download? Asked the manufacturer?
Last updated: 2025-09-29

Post by jzhvymetal77 on Special Chars in Visualizationfor QR code string ^{CODESYS Forge talk (Post)}
Ok I'm closer as I switch using WSTRING but in Visualization it does not respect LINE BREAKS. Instead it shows $n. See attached image.
Last updated: 2025-09-29

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
add the Container serial number this is usually 130-xxxxxxxx and last row the license ticketnumber which you got from the CODESYS Store order
Last updated: 2025-10-01

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your detailed and thoughtful feedback. We will discuss the topic in our team. Best regards, Georg
Last updated: 2025-10-02

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Tim, This is the missing link for me. I was not aware of the fact that the docker container is claiming the smallest possible license. Now the serial number makes much more sense. Thank you
Last updated: 2025-10-02

Post by dogulas on numeric text box control ^{CODESYS Forge talk (Post)}
I am using TargetVisu in my v3.5 sp20 p6 (64-bit) project. I see no control that will allow me to bind, edit, and display a LREAL variable. Am I missing a library? If it exists, why can't I see it?
Last updated: 2025-10-02

Post by nchau on Requesting ESI Files for Estun Pronet Servo Drives (EtherCAT) ^{CODESYS Forge talk (Post)}
Yes, that's correct. I registered and visited the page at https://en.estun.com/?list_139/1380.html , but there were no ESI files available under the Data Download section. I also tried contacting the manufacturer directly, but haven’t received any response yet.
Last updated: 2025-10-03

Post by richard-wang on Dynamically change the Trend recording property of a Trend element ^{CODESYS Forge talk (Post)}
Hi there, may I bother to ask if you have a solution for the dynamic trend recording?
Last updated: 2025-10-06

Post by richard-wang on Dynamically change the Trend recording property of a Trend element ^{CODESYS Forge talk (Post)}
Hi there, may I bother to ask if you have a solution for the dynamic trend recording?
Last updated: 2025-10-06

Post by timvh on Having trouble using the Web Client SL library ^{CODESYS Forge talk (Post)}
it should be something like: fbWebClient : WEB_CLIENT.WebClient; You need to use the "Namespace" of the library, not the name of the library itself.
Last updated: 2025-10-07

Post by timvh on How to correctly create a device descriptor (.devdesc.xml) for a custom Linux ARM64 PLC in CODESYS 3.5.21.20? ^{CODESYS Forge talk (Post)}
Yes, this is possible with the Toolkit. We only server customers in the Benelux that do this, so contact your local CODESYS distributor, or contact the sales team of CODESYS Germany.
Last updated: 2025-10-07

Post by caliberbishop on Having trouble using the Web Client SL library ^{CODESYS Forge talk (Post)}
Edited: Thank you, after further inspection the library is unavailable in the example project for some reason, but using the correct Namespace in my project solved the problem.
Last updated: 2025-10-07

Post by e13740e on Сalling the context menu from the keyboard ^{CODESYS Forge talk (Post)}
Hello, the request is no longer relevant. Thank you. Working with the Main Menu bar via the Alt key is the most effective method. It has absolutely everything there. Calling the context menu via the keyboard is not necessary.
Last updated: 2025-10-09

Sort by relevance or date