Post by dhumphries on Minimum system requirements for codesys control standard S ^{CODESYS Forge talk (Post)}
I'm working on a low cost project and I'm considering installing the Codesys runtime on a PC running Linux Debian instead of buying a PLC with a pre-installed runtime. For my needs the Control Standard S license should be capable of running some IO over ethernet/ip, and a webvisu. The PC I am considering has a AMD GX-424CC 2.4GHz processor (4 core/4 thread) and 4GB RAM. This may compare to a raspberry pi4, but I know an X86 processor doesn't directly compare to an ARM processor, and a processor can have a high clock speed but other factors like L2/L3 cache can influence the overall performance. I can't find any published specs for the processor and RAM requirements to run the Codesys Control runtime, does anybody have a link to the minimum system requirements or experience using devices that are at or below the minimum system requirements. A raspberry pi with the control for raspberry pi SL runtime license would be the lowest cost option, but the license is not for commerical use. This restriction is somewhat vague, can anybody clarify if this means I can use a raspberry Pi runtime for in-house automation, what about if I am selling an integrated system that uses a raspberry Pi as a controller?
Last updated: 2023-12-25

Post by oe2swm on Raspberry pi rt preempt ^{CODESYS Forge talk (Post)}
Hello, I tried very hard to get Raspberry working with RT PREEMPT Kernel, But still i cannot get it working. Is there someone who can provide a Image for Raspberry 3b or 4(4gb) Thanks a lot!
Last updated: 2023-12-25

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
Hello, I am trying to save my settings as a recipe on the Raspberry. As target path I use /user/Documents Save: SaveRecipeAS, 'Recipes', 'Recipe' Load: ReadRecipe, 'Recipes', 'Recipe' However, no recipe is created. What could be the reason?
Last updated: 2023-12-28

Post by andrax on Save Recipe on Paspberry ^{CODESYS Forge talk (Post)}
I have now renamed my recipe to Parameter and now use SaveRecipeAs. The correct folder is displayed in the dialogue box, but the recipe is not saved. What could be the reason for this, write permissions? Recipe manager buggy?
Last updated: 2023-12-29

Post by reinier-geers on Time zone ^{CODESYS Forge talk (Post)}
I use a controller with Linux. I try to change timezone. but no result. The command of codesys i dont understand ?? And Linux Commands dont work. It stays at +0 . I want Amsterdam
Last updated: 2023-12-29

Post by atone on File Creation Issue ^{CODESYS Forge talk (Post)}
@eschwellinger does FILE.Copy fails with FILE_OPERATION_DENIED when copying outside from the IEC path for the same reason? I'm looking for a workaround to this limitation.
Last updated: 2024-01-04

Post by ewi04 on Recipe Manager - RecipeManCommands, load & write wrong values, Bug? ^{CODESYS Forge talk (Post)}
Nice to hear that I'm not the only one. I share your suffering. I was on the verge of doing the same.
Last updated: 2024-01-04

Post by eschwellinger on function block output ^{CODESYS Forge talk (Post)}
I think you should use a piece of hardware in between your drive (pulse/direction) and the plc like for example Beckhoff EL2521 - so Ethercat might be to choice if you need CNC and SoftMotion. EK1100 and EL2521
Last updated: 2024-01-05

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thansk
Last updated: 2024-01-12

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thanks
Last updated: 2024-01-12

Post by anderson on PWM To analog ^{CODESYS Forge talk (Post)}
ja aproveitando a discussão, eu estou com um problema relacionado ao uso da biblioteca OSCAT. estou tentando usar o bloco pwm, porém nao consigo executar.nao tem uma entrada para a função execute
Last updated: 2024-01-12

Post by jdjennings1962 on Trouble accessing Math functions in OSCAT library ^{CODESYS Forge talk (Post)}
Thank you seoerr for your suggestion. When I implement that line, I get this error: ** [ERROR] 'OSCAT_BASIC.ARRAY_SDV' is of type FUNCTION and cannot be instantiated** Any other thoughts about instantiating these sections of the library which seem to be provided as source only?
Last updated: 2024-01-16

Post by mozburg on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
Has there been any progress on this issue? Currently running sp19 patch 5 with all packages updated but unable to add more channels...
Last updated: 2024-01-18

Post by awarginaire on Codesys state running automatically ^{CODESYS Forge talk (Post)}
Hello, I would like the PLC to open automatically in etat running. I have created a boot project but on startup the state is always stopped. What should I do?
Last updated: 2024-01-18

Post by peter-skokanek on Rpi install runtime licence on SP13 ^{CODESYS Forge talk (Post)}
Hi, In fact, I reinstaled OS from the latest version Bookworm to older Booster and everithing works OK. Anyway, can somebody know when will be available new version of runtime 4.11.0.0?
Last updated: 2024-01-18

Post by hfelek on *SOURCEPOSITION* App = [Application] area=0, offset = 0 on default example ^{CODESYS Forge talk (Post)}
Is this forum viewed by any officials? What must be the priority of topic to get answered? There is not even a brief answer.
Last updated: 2024-01-18

Post by pr0schwein on Driving the slave axis across master's zero point - caming ^{CODESYS Forge talk (Post)}
Is there a way to move the slave axis across the zero point of the master axis with variable start and stop points? For example: Slave start at 270° and end at 50°. thanks :)
Last updated: 2024-01-18

Post by levih on DocScripting ^{CODESYS Forge talk (Post)}
Hello I'm trying to use the DocScripting collection in Codesys. I've made it work on one PC(1) for the 3.5.16.4 version of the script collection. But when I try the same setup on another PC(2), I get an error message: Error loading Python DLL: D:\SCRIPTING\3.5.16.40\python27.dll (error code 14001) My setup on both PC's is thus: 1. Downloaded and installed Python 2. Copied the folder with the scripting collection to C: (because of admin rights) 3. Placed my .library file in the same folder as the scripting collection Only difference is that Python is v3.12.0 on PC1 and v3.12.1 on PC2. I thought maybe it was something with Python, but then I have tried using the scripting collection from 3.5.16.1, and that seems to work. Just not for scripting collection 3.5.16.4. I also can't seem to find any scripting collections on newer versions of Codesys? (e.g. 3.5.19.10) Thanks in advance!
Last updated: 2024-01-22

Post by timvh on GetCurrentUser ^{CODESYS Forge talk (Post)}
if you just want to show the currently logged in user in the visualization, then just create a field with text %s and as text variable VisuElems.CurrentUserName
Last updated: 2024-01-23

Post by alexgooi on Codesys OPC DA server requires more then 2 GB of ram ^{CODESYS Forge talk (Post)}
Dear Forum, We are currently running into a problem that the CODESYS OPC DA server is running out of RAM (larger than 2 GB). We have a setup of 10 Codesys controllers which features around 300.000 discoverable tags per controller. We are only interested in 10 percent of the tags to be communicated to the OPC-server, this is due to the fact the program consists of arrays of objects which on their part implements arrays of objects, simply reducing the number of discoverable tags is not an option The OPC-DA server loads all the discoverable tags, is it possible to: 1 let the OPC-DA server only load the tags that are requested by the SCADA/MES system. 2 let the OPC-DA server claim more memory. 3 run 2 OPC-DA servers in parallel? Thank you in advance
Last updated: 2024-01-25

Post by matt-s on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
I know, that is not the issue though. The issue is the HMI_Blower_Auto_PB variable not changing to false. I do not have the IO modules plugged in yet, that is why there are NaN values for those variables. That should not affect this.
Last updated: 2024-01-25

Post by masmith1553 on HMI Pushbutton/Move Instruction ^{CODESYS Forge talk (Post)}
Have you cross referenced the variable to see if it is being written some where else? You could try an Execute block instead of a Move.
Last updated: 2024-01-25

Post by kyo424 on EtherCAT Can't reconnect to servo drive ^{CODESYS Forge talk (Post)}
Hi, I meet the same issue, too. But no one can answer me,so sad. If you got solution, kindly tell me, thanks.
Last updated: 2024-01-26

Post by ekristoffe on Problem install codesys 3.5.17 SP 30 with Codesys Installer ^{CODESYS Forge talk (Post)}
hello, it seem the installer 2.2.1 fix this problem. please try after updating codesys installer (if the auto update doesn't show the latest version available, you may have to download manually from the codesys store).
Last updated: 2024-01-26

Post by ewi04 on Git - User identification data is lost when codesys is closed ^{CODESYS Forge talk (Post)}
With git 1.4.0.0 it has gotten even worse. Now i have to enter the information every commit. Great.. Doesn't that bother anyone?
Last updated: 2024-01-26

Sort by relevance or date