Post by hyys12 on CODESYS 3.5 dicovery of PLC modules ^{CODESYS Forge talk (Post)}
I have a WAGO PLC, to which I am establishing a connection. Here I use the autodiscover to register the connected modules. Now, I have tested the in-/outputs of the different modules, to verify they are consistent with how they are physically connected to the PLC in regards to how CODESYS has numbered them. Will CODESYS always number the modules closest to the PLC itself lowest, and the one furthest away, the highest? I am rather new to the program, so I both hope my question makes sense, as well as not being completely obvious. Thanks!
Last updated: 2024-12-06

Post by hyys12 on Energie price ^{CODESYS Forge talk (Post)}
I am definetly not an expert in this field, but it does seem like you need a propper API key in the URL. Right now you are using the token 'ANWB' in your URL, which the website returns an error, since this is not valid. Somehow you first need a propper API key. I hope that makes sense.
Last updated: 2024-12-06

Energie price ^{CODESYS Forge talk (Thread)}
Energie price
Last updated: 2024-12-06

Post by csu-chris on Colors look different when logged in and running ^{CODESYS Forge talk (Post)}
I am running CODESYS V3.5 SP19 Patch 2 (64-bit) I have buttons that are supposed to be either red or green depending on status. When I am logged out the colors look right. When I am logged in and running the colors are completely different and I can't understand why.
Last updated: 2024-12-06

Post by eozupek on Converting a Softmotion 32 bit application to 64 bit ^{CODESYS Forge talk (Post)}
Last updated: 2024-12-09

Converting a Softmotion 32 bit application to 64 bit ^{CODESYS Forge talk (Thread)}
Converting a Softmotion 32 bit application to 64 bit
Last updated: 2024-12-09

JSON Utilities ENUM to STRING ^{CODESYS Forge talk (Thread)}
JSON Utilities ENUM to STRING
Last updated: 2024-12-09

Post by amy123 on JSON Utilities ENUM to STRING ^{CODESYS Forge talk (Post)}
Hello, Is it possible to get the string returned from the ENUM JSONType? I read that with regular enumerations you can add '{attribute 'to_string'}' and access it. However, this is from the compiled library, so I can not add that attribute. When I try to use TO_STRING(JSONType) it returns the integer as a string. Ex. jsonType :=TO_STRING(pJSONData^._aJSONData[i].eType); gives '8' instead of NONE Thanks!
Last updated: 2024-12-09

Post by fedu on Programmatically change the IP addresses of the Modbus TCP slave devices ^{CODESYS Forge talk (Post)}
I have the same need. Did you solve it? thanks
Last updated: 2024-12-10

Virtual and hardwired Keyboard together ^{CODESYS Forge talk (Thread)}
Virtual and hardwired Keyboard together
Last updated: 2024-12-10

Programmatically change the IP addresses of the Modbus TCP slave devices ^{CODESYS Forge talk (Thread)}
Programmatically change the IP addresses of the Modbus TCP slave devices
Last updated: 2024-12-11

Post by talhaali on Virtual and hardwired Keyboard together ^{CODESYS Forge talk (Post)}
Hi there, Is there any way I can use harwired and virtual keyboard at same time. There is an option to use either touhpad or keyboard in targetVisu. Is there any way that I can use both at same time?
Last updated: 2024-12-10

Post by xabier on Kinematics Robot Delta 2 Axis ^{CODESYS Forge talk (Post)}
Hi, I have a customer and this customer design this robot...The customer need move ...I would like if Codesys has this Kinemtaics I attached photo of the robot.(this robot has 2 Axis) I have checked all kinematics has Codesys but not has the same....Someone help me Please?? Thanks XABI
Last updated: 2024-12-11

Post by pmanuele on Beckhoff AS1060 and EL7041 configuration ^{CODESYS Forge talk (Post)}
Hello everyone, i'm having some problems commanding AS1060 step motor with EL7041 (rev22) drive. With motor i've also the incremental encoder (05.2420.1230.0200.5009). I can correctly move the motor in "Position controller" operating mode with the internal counter. The problems start when i set the Encoder in feedback type or i change the operating mode. Does anyone have experience with these two terminals and can give me some advice of main parameters to check or change? Thanks everyone
Last updated: 2024-12-11

EtherCAT Mailbox Gateway ^{CODESYS Forge talk (Thread)}
EtherCAT Mailbox Gateway
Last updated: 2024-12-11

Post by hardcoder on EtherCAT Mailbox Gateway ^{CODESYS Forge talk (Post)}
Hi all I found that in the last Ethercat master release (4.8.0.0) the Mailbox Gateway feature has been added. This would be useful for me to connect to a specific slave in my system, since its configuration software supports this type of gateway communication. Anyway I don't find usage information or examples. At the moment I tried to enable it in the ethercat master device settings and I configured with an IP address on the subnet of the ethercat adapter (i.e. ethercat nic configured with static ip 192.168.10.100 subnet 255.255.255.0, mailbox gateway configured to 192.168.10.30). I expected it would have responded to ping commands on the address but nothing happens. I am missing something?
Last updated: 2024-12-11

Post by hyys12 on Help understanding analog in-/outputs ^{CODESYS Forge talk (Post)}
Hello. I am currently working on a WAGO PLC, where I am trying to wrap my head around how the analog inputs and outputs work in codesys. I have looked far and wide on the internet, for a general introduction to the whole concept, but I have not had any luck with finding anything that helped me understand it better. The whole goal is for me to be able to read an analog input from a temperature sensor, as well as using an analog output, to control a frequency inverter. I know these have nothing to do with each other, but that is all I have on hand right now. I am trying to program this using Ladder Diagram. The only thing is, that every video/guide I have seen/read using LD, just adds a whole lot of function blocks, to do all kinds of stuff they don't explain. My general question is, how would one go ahead and read the analog input, as well as transmit an analog output? Is there some kind of specific function block I would have to use for this, or some great video I can watch, to understand the inner workings. Is it somehow possible to see the values the PLC recieved/sends? Regards.
Last updated: 2024-12-11

CODESYS 3.5 dicovery of PLC modules ^{CODESYS Forge talk (Thread)}
CODESYS 3.5 dicovery of PLC modules
Last updated: 2024-12-11

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hello, Codesys team, please can I have an explanation? It's frustrating and complicated on production machines to have to reload the entire program even though it's identical, just because of this missing information. How the information 'Download time' is saved?
Last updated: 2024-12-11

Post by hyys12 on CODESYS 3.5 dicovery of PLC modules ^{CODESYS Forge talk (Post)}
I would say that I kind of got an explanation though this document on the WAGO PLC. https://techdocs.wago.com/io-system/750_753/system/en-US/index.html#92248203
Last updated: 2024-12-11

Post by cihangur on OpC UA server on Raspberry Pi 64 SL runtime ^{CODESYS Forge talk (Post)}
After my tests, I noticed two issues. 1- WinCC disconnects the connection after receiving the GetEndPointResponse message from CoDeSys. (I found it with UAExpert and Wireshark.) 2- It establishes a connection despite waiting for a while on the network with DNS. As a result of this information: I solved the problem by adding the line "193.193.193.150 t9pac" to the C:\Windows\System32\Drivers\etc\hosts file and making Windows accept messages coming from the IP number 193.193.193.150 as coming from t9pac. (t9pac is the name of my PLC running CoDeSys.) If there is a setting that will allow CoDeSys OPC UA to respond to GetEndPointRequest with its IP address, this problem will not occur.
Last updated: 2024-12-12

OpC UA server on Raspberry Pi 64 SL runtime ^{CODESYS Forge talk (Thread)}
OpC UA server on Raspberry Pi 64 SL runtime
Last updated: 2024-12-12

Post by jddaigle on Working on exporting/importing projects to PlainText. ^{CODESYS Forge talk (Post)}
Hello! I'm really interested in your project. How can I get access to this repo? Thanks
Last updated: 2024-12-13

Post by jddaigle on Working on exporting/importing projects to PlainText. ^{CODESYS Forge talk (Post)}
Hello! I'm really interested in your project. How can I get access to this repo? Thanks
Last updated: 2024-12-13

Post by daniel on Codesys Tools Update Raspberry ist nicht vorhanden aktualisieren im Geraete ansicht geht auch nicht ^{CODESYS Forge talk (Post)}
Guten Tag, ich habe das gleiche Problem nur mit der 20.4 Version. Über den Installer habe ich alles installiert allerdings erscheint bei mir unter Tools nicht die Möglichkeit den Raspberry zu aktualisieren. Mit der 19.7 habe ich das gleiche Problem. Muss noch etwas anderes installiert werden? Kann mir jemand weiterhelfen? Grüße Daniel
Last updated: 2024-12-13

Sort by relevance or date