Beckhoff EL7037 softmotion ^{CODESYS Forge talk (Thread)}
Beckhoff EL7037 softmotion
Last updated: 2024-12-23

Post by gseidel on Beckhoff AS1060 and EL7041 configuration ^{CODESYS Forge talk (Post)}
Hi pmanuele, while I don't have firsthand experience with the EL7041 and the step motor AS1060, there are two things you can check: If you use an external encoder, please make sure you use the alternative device description calles "EL7041 1Ch. Stepper motor output stage (50V, 5A) Rev24 with external Encoder". The SoftMotion driver will set the feedback type automatically, and use the correct object for the actual position (16#6010:21 instead of 16#6010:20) If you have problems with changing the controller mode, I assume to velocity, please make sure you change the PDO mapping so that the actual velocity (16#6020:33) and set velocity (16#7010:33) are mapped by PDO. Hope this helps, Georg
Last updated: 2024-12-23

Beckhoff AS1060 and EL7041 configuration ^{CODESYS Forge talk (Thread)}
Beckhoff AS1060 and EL7041 configuration
Last updated: 2024-12-23

Post by arcadium on Library ENUM text representation in visualization ^{CODESYS Forge talk (Post)}
Hello, Maybe someone could help with this. When I add ENUM to a text field I get the number instead of the text. For my own ENUM variable I have declared and enabled text list value is displayed as text, but I need enum text displayed from softMotion and other internal FB's. In the picture I have one of desired ENUM variable setup, but in the visu I have number, but in the watch window it's text. There is probably some checkbox to tick, but was looking for an hour, can't find a solution. Would apreciate some help
Last updated: 2024-12-24

Post by arcadium on Library ENUM text representation in visualization ^{CODESYS Forge talk (Post)}
Hello, Maybe someone could help with this. When I add ENUM to a text field I get the number instead of the text. For my own ENUM variable I have declared and enabled text list value is displayed as text, but I need enum text displayed from softMotion and other internal FB's. In the picture I have one of desired ENUM variable setup, but in the visu I have number, but in the watch window it's text. There is probably some checkbox to tick, but was looking for an hour, can't find a solution. Would apreciate some help
Last updated: 2024-12-24

Library ENUM text representation in visualization ^{CODESYS Forge talk (Thread)}
Library ENUM text representation in visualization
Last updated: 2024-12-24

Post by mtnkyr on Runtime Problem connecting to Keyence IV-500MA Camera ^{CODESYS Forge talk (Post)}
I have to use Keyence IV-500MA Camera for a project. Actually I can use physical connection but I tried to connect using Ethernet protocol so I added its EDS file but I took a lot of errors. Could you help me to solve this problem?
Last updated: 2024-12-26

Axis references in visualization ^{CODESYS Forge talk (Thread)}
Axis references in visualization
Last updated: 2024-12-26

Post by mtnkyr on Runtime Problem connecting to Keyence IV-500MA Camera ^{CODESYS Forge talk (Post)}
I have to use Keyence IV-500MA Camera for a project. Actually I can use physical connection but I tried to connect using Ethernet protocol so I added its EDS file but I took a lot of errors. Could you help me to solve this problem?
Last updated: 2024-12-26

Runtime Problem connecting to Keyence IV-500MA Camera ^{CODESYS Forge talk (Thread)}
Runtime Problem connecting to Keyence IV-500MA Camera
Last updated: 2024-12-26

Post by eschwellinger on Runtime Problem connecting to Keyence IV-500MA Camera ^{CODESYS Forge talk (Post)}
which plc in which version do you use?
Last updated: 2024-12-27

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
Its Running on a Weintek CMT HMI. the program is not huge, just controlling a few pumps. plc is at 1%
Last updated: 2024-12-27

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
see attached I don't have watchdog enabled in tasks?
Last updated: 2024-12-27

Post by nz-dave on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
3.5,18,30 The Weintek HMI Runs a dual core CPU.. one for the HMI and one "real time OS" for Running Codesys.
Last updated: 2024-12-28

Post by eschwellinger on Ethernet/IP Scanner Exception ^{CODESYS Forge talk (Post)}
which runtime version and dies this device has an realtime kernel?
Last updated: 2024-12-28

Post by dogulas on OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Post)}
Ok, for the sake of completeness in case anyone else has this problem. I can tell you that what finally worked for me was to change the line: // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA", 5), structAData ); to: // create an ExtensionObject to wrap the value to be written ExtensionObject extensionObject = new ExtensionObject( new ExpandedNodeId("GVL_StructA|defaultbinary", 5), structAData ); I'm sure there are many other problems that could cause this very generic error, but this was my problem.
Last updated: 2024-12-30

Post by durallymax on Cannot Start Application ControlWin ^{CODESYS Forge talk (Post)}
Uninstalling and deleting all ProgramData manually, then re-installing appears to have fixed it.
Last updated: 2024-12-30

OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Thread)}
OPC UA C# client connecting to OPC UA CODESYS server
Last updated: 2024-12-30

Cannot Start Application ControlWin ^{CODESYS Forge talk (Thread)}
Cannot Start Application ControlWin
Last updated: 2024-12-30

Post by micik on PLCOpenXML Export/Import with Visualisation ^{CODESYS Forge talk (Post)}
I have noticed that Codesys doesn't provide option to Export any Visualization objects even though there is option to check to export VISU_TASK, which is strange because when Import in another empty project, user will end up with build errors. I understand that probable reason for this is that PLCOpenXML specification includes only "PLC" parts of the project (POU, PRG, variable lists, device ....), but not sure about it. Perhaps, there is some option to include visu objects also in the plcopen xml export list??
Last updated: 2025-01-07

Post by jeroenaero on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
For what it is worth taking into account on version 4.18: Softmotion 4.17 doesn't work with the SMC_TRAFO_Scara2. Very small numbers come out of dA and dB. Going back to version 4.16 solves the issues.
Last updated: 2025-01-07

Post by conny-nm on Bosch BME 280 bzw 688 Sensor per I2C Bus steuern und Daten in Codesys verarbeiten ^{CODESYS Forge talk (Post)}
Hallo Markl, gibt von Stefan Dreyer auf Git Hub Biblioteken für BMP280 und BME280, laufen aber nur in 32Bit auf dem Raspberry. BME680 kann man mit Node Red auslesen und mit mqtt zu Codesys übertragen.
Last updated: 2025-01-07

Post by aconley on Static Code Analysis ^{CODESYS Forge talk (Post)}
I know it's been a while, but I did find this: system.commands['staticanalysis','config'].execute() It opens the UI to select your settings, but I haven't figured out how to load the .CSA yet.
Last updated: 2025-01-07

MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Thread)}
MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0
Last updated: 2025-01-07

Static Code Analysis ^{CODESYS Forge talk (Thread)}
Static Code Analysis
Last updated: 2025-01-07

Sort by relevance or date