Post by tk096 on Fieldbus has lost synchronicity ^{CODESYS Forge talk (Post)}
Hi, a few suggestions on how to tackle the problem: - it might help to increase the cycle time of the ethercat task - increase the value of the ethercat parameter DCInSyncWindow (https://content.helpme-codesys.com/en/libs/IODrvEtherCATDriver/Current/pou-IoDrvEtherCAT/DCInSyncWindow.html) (see attached image) - enable FrameAtTaskStart (https://content.helpme-codesys.com/en/libs/IODrvEtherCATDriver/Current/pou-IoDrvEtherCAT/FrameAtTaskStart.html) in the ethercat master (see attached image) - if the drives can handle the synchronization problems, checking of the synchronization can be deactivated using SMC_Set_ETC_DCSyncSupervision (https://content.helpme-codesys.com/en/libs/SM3_Drive_ETC/Current/SMC_Set_ETC_DCSyncSupervision.html).
Last updated: 2024-04-11

Post by dkugler on Alarm State Icon ^{CODESYS Forge talk (Post)}
thank you for pointing me to this "bug"!! I haven't recognized, the bit is reset after the first alarm is gone. I use this only for warnings, so it's not a drama, but was not correct in the past. I solved it now simply stupid by counting up a variable every time an alarm appears and decreasing it if an alarm is gone. The "warning lamp" is activated by checking the counter is > 0 The nice side effect, i'm able to show the number of active alarms in the state line now.
Last updated: 2024-04-24

Post by timvh on Codesys SVN ^{CODESYS Forge talk (Post)}
If you use 3.5 SP10, then Git is not supported. SVN will work fine, but with this version you do need a USB key, because software licenses are not supported with this version. Off course you can work without SVN (or Git), but especially if you work with multiple developers on one project, it will save you a lot of time and you can keep track of all changes and improvements much easier. So how much is this worth to you?
Last updated: 2024-04-30

Post by totorovic on Softmotion not working with simulation mode ^{CODESYS Forge talk (Post)}
Good morning, I think that the mode Simulation does not support the Softmotion functionnality because it runs the CODESYS process with normal priority wich is not a good thing for real-time behavior. If you want to test your PLC project, please use a Codesys Control Softmotion (and your computer must have the Ethercat driver installed) or much easier, download your code into the C6 Smart. BR
Last updated: 2024-05-13

Post by engrahman on The current baud rate could not be determined in CR0020 IFM with maintenance tool ^{CODESYS Forge talk (Post)}
Hello everyone, im working with IFM CR0020 controller via RS232 protocol where im trying to connect it to my PC but, every time when im using the maintenance tool to identify the device i get the error "The baud rate could not be determined" i have tried to change the cable of RS232 with different types but the error presist, any idea how to fix it
Last updated: 2024-05-21

Post by ndzied2 on Rounding error in simple addition ^{CODESYS Forge talk (Post)}
This is a consequence of how computers store floating point numbers. 0.1 cannot be exactly represented in a computer. This is not a CoDeSys thing. Here is a link to a converter to show you the exact value that is represented when you use a REAL data type (which is a 32 bit float). https://baseconvert.com/ieee-754-floating-point If you really need to keep track of 0.1 increments. use INT OR DINT and then add 1 each time and assume that there is one decimal place.
Last updated: 2024-05-24

Post by bitwitch on Einheiten umrechnen, Numpad und Eingabegrenzen ^{CODESYS Forge talk (Post)}
Das Codesys-Objekt 'Einheiten umrechnen' wirkt auf timeVar (TIME) z.B. innerhalb eines Visu-Rechtecks und funktionier in den Grundfunktionen einwadfrei. Die Ausgabe der Std. von timeVar läuft. Beispiel: Bei t#3d2h10m wird wunschgemäß 74h (volle Std-Anzahl). Die Grenzüberwachung Max= 10 funktioniert nicht, da die Angabe scheinbar ms erwartet (arbeitet mit 10ms). Irgend wie muss man jetzt codesys davon überzeugen, dass auch für Min und Max die Einheitenumrechnerei wirken soll, wobei die Eingabe der Grenzen in Std erfolen muß. Hat jemad einen TiPPPPPPPPP?
Last updated: 2024-06-14

Post by andre-luis on Check if Codesys runtime is on 'Running' or 'Stopped' state? ^{CODESYS Forge talk (Post)}
Just to share, for those who as me are seeking for this and had found no information anywhere in this World: Every time I stop/start the PLC runtime ( turning into 'Stopped' or 'Running' state ) the 'CODESYSControlService' appears at the Taskmanager list, which could suggest a straight correlation. I was expecting a clever solution, but this one solves for while.
Last updated: 2024-07-02

Post by mubeta on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Yes, this point is part of my misunderstanding. Why, after the execution ot the motion FBs is set to FALSE and exsecuted at lest one time, it must be continuosly called, even if the motion control it's take from another subsequent instruction. This is what I really don't undertand, but what in fact it's happening. For example, in case of stopping a MoveVelocity FB, then Halting the motion by the related FB, the axis at spot goes into error. If there was bad trigger management, the various instructions would NEVER work.
Last updated: 2024-07-18

Post by docker on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
Thanks for the reply, i am using codesys SP16 patch 5 as this is the version that is compatible with my IFM controller. i am accessing the lastusage variable from the VisuStructClientData structure through a pointer. when i log in it lists the time since last log in but does not continually count, it remains a static value which isnt useful. hopefully you can help. Thankyou
Last updated: 2024-08-26

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

Post by mostafa-beshr on implementing continuous movement in Codesys ^{CODESYS Forge talk (Post)}
Hi everyone, I’m working on implementing continuous movement in Codesys, but I've run into some trouble. I've tried using ALL SM3 Basic and SML without success. I’m specifically looking for a library that supports continuous updates and can fetch values from a server in real time. Does anyone know of a library or approach that fits these requirements? Any advice or suggestions would be greatly appreciated! i read plcopen documentaion as well as codesys Thank you!
Last updated: 2024-09-11

Post by dkugler on EThercat Dynamic configuration ^{CODESYS Forge talk (Post)}
I can confirm that at my 4ms EtherCAT Master the frames per second is equal at round about 500 with Codesys SP19. The same program at SP16 it was at 380-430 f/sec. for me it will be interesting too, whats the reason is for this high frame count/sec? I havn't had the time to use a paket sniffer and analyse all the frames. I can't help with your other questions, sorry.
Last updated: 2024-09-19

Post by yannickasselin on MQTT QoS 1 & 2 ^{CODESYS Forge talk (Post)}
Using Wireshark, I can see that the broker sends the QoS 1 or 2 messages when Codesys MQTT client reconnects but they are just discarded and not acknowledged by Codesys MQTT Client. So the broker holds on to them and tries to send them back to Codesys every time the client reconnects but they are always discarded by Codesys. There really seems to be an issue with QoS 1 & 2 in Codesys. It really does not behaves like it should.
Last updated: 2024-10-31

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Finnaly i get it working. There was a line in the file that set the ADS1015 chip in /boot/firmware/config.txt which i removed and after that the ADS1115 has a green turning circle and i got values. i created a new component so it fits our ADS1015. see screenshot. It works also with Codesys Control for Raspberry Pi 64 SL after adding the ULINT_TO_UDINT conversion in the library. i think the chip was all the time in use by the Raspberry pi itself. Thanks for your help!
Last updated: 6 days ago

Post by ph0010421 on How to create a stopwatch? ^{CODESYS Forge talk (Post)}
Do you need an 'hours-run' counter? And 1 second resolution is ok? I think you're over-thinking it. (The task time needs to be < 1second) Have a look at the LAD... Then, the time in seconds can be made into hh:mm:ss with this FUNction Declarations: FUNCTION funSecondsToStringTime: string VAR_INPUT InSeconds: UDINT; END_VAR VAR AsString: STRING; Minutes: UDINT; Hours: UDINT; Seconds: UDINT; MinutesAsString: STRING(2); HoursAsString: STRING(2); SecondsAsString: STRING(2); END_VAR and the code: Hours := InSeconds / 60 / 60; //Derive hours Minutes := (InSeconds - (Hours * 60 * 60)) / 60; //Derive minutes Seconds := InSeconds - ((Hours * 60 * 60) + (Minutes * 60));//Derive seconds HoursAsString := UDINT_TO_STRING(Hours); MinutesAsString := UDINT_TO_STRING(Minutes); SecondsAsString := UDINT_TO_STRING(Seconds); IF LEN(HoursAsString) = 1 THEN HoursAsString := CONCAT('0',HoursAsString); END_IF; IF LEN(MinutesAsString) = 1 THEN MinutesAsString := CONCAT('0',MinutesAsString); END_IF; IF LEN(SecondsAsString) = 1 THEN SecondsAsString := CONCAT('0',SecondsAsString); END_IF; AsString := CONCAT(HoursAsString, ':'); //assemble string AsString := CONCAT(AsString,MinutesAsString); AsString := CONCAT(AsString,':'); AsString := CONCAT(AsString, SecondsAsString); funSecondsToStringTime := AsString;
Last updated: 2023-12-08

Post by acc00 on Main Task cycle too long leading to PLC Fail ^{CODESYS Forge talk (Post)}
I have 2 Wago PFC200 PLC, running with Runtime SP19 Patch 5, with the Redundant application. The PLC communicates as Modbus Master with at this moment 15 Modbus Slaves -later there will be 28 in total- (Drives, Power management units,...). These devices are connected in 2 rings (1 ring of Drives, 1 ring of Power Management units), with 2 Managed Moxa Switches being part of the ring. Each PLC is connected to one of these switches. The issue I'm encountering is that the Cycle time of the Active PLC goes very high when I'm closing the Drive ring (simulating an issue on one Cabinet supply, resulting in that one Drive shut down, which can happen on field quite often). As a result of this long cycle, the PLC fails and goes to Exception, and the Passive PLC does not take control of the system. A normal cycle is around 30ms for the Main task, and a few ms for the Ethercat task. When I monitor with Profiler, I see that in this Maximum Cycle, the main Task is only taking 13ms, so I'm not sure where the PLC is hanging for so long. Is the remaining cycle time the Redundant management/sync or something else? Thank you in advance.
Last updated: 2024-03-08

Post by umdee on Error when monitoring LAD programs ^{CODESYS Forge talk (Post)}
System Information from the computer being used: OS Name Microsoft Windows 11 Pro Version 10.0.22631 Build 22631 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Manufacturer Dell Inc. System Model Latitude 5500 System Type x64-based PC System SKU 08B9 Processor Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s) BIOS Version/Date Dell Inc. 1.3.11, 6/11/2019 SMBIOS Version 3.2 Embedded Controller Version 255.255 BIOS Mode UEFI BaseBoard Manufacturer Dell Inc. BaseBoard Product 0M14W7 BaseBoard Version A00 Platform Role Mobile Secure Boot State On PCR7 Configuration Elevation Required to View Windows Directory C:\WINDOWS System Directory C:\WINDOWS\system32 Boot Device \Device\HarddiskVolume1 Locale United States Hardware Abstraction Layer Version = "10.0.22621.2506" User Name CARDASSIA-IX\Engineer Time Zone Eastern Daylight Time Installed Physical Memory (RAM) 16.0 GB Total Physical Memory 15.8 GB Available Physical Memory 4.67 GB Total Virtual Memory 18.5 GB Available Virtual Memory 2.52 GB Page File Space 2.63 GB Page File C:\pagefile.sys Kernel DMA Protection Off Virtualization-based security Not enabled Windows Defender Application Control policy Enforced Windows Defender Application Control user mode policy Off Device Encryption Support Elevation Required to View Hyper-V - VM Monitor Mode Extensions Yes Hyper-V - Second Level Address Translation Extensions Yes Hyper-V - Virtualization Enabled in Firmware Yes Hyper-V - Data Execution Protection Yes
Last updated: 2024-03-19

Post by rabaggett on Reading Named Pipes in Linux Is there a better way? ^{CODESYS Forge talk (Post)}
I have a Python program that will handle things in my application such as VISA over IP and Telnet control of instruments. I want the main control and HMI in Codesys. My problem is communication between the two. I have looked at several ways to accomplish this, and settled on having the Python program create two named pipes, one to send information to Codesys, and one for Codesys to send information to Python. The information would be packetized with \n for end of packet.. Seems simple. I think the named pipes method should work, but file reading in Codesys using the CAA file library starts to get difficult when the file is never ending, as in this case. Before I spend too much time making something that may be fundamentally flawed I want to ask. Is there a better way? Is there a way to read the file 'one line at a time' which might solve my never ending file problem? Thanks!
Last updated: 2024-05-09

Post by fajean on CODESYS control on RPi starts, shortly runs, then exits ^{CODESYS Forge talk (Post)}
I have a Raspberry Pi 4 we have been using for years to run CODESYS for development purposes. I recently have had to re-install the OS (Raspberry OS lite). The only change to the default configuration is not creating the "pi" user during install. I (apparently successfully) installed the 4.10.0.0 control on the Raspberry Pi. We have licences on a dongle. I am able to start the control. systemctl status shows it as running for a little while (exactly, precisely 30 seconds as per my tests, every time), then it becomes exited. I can restart the control, and the same thing happens again. Every time. In the brief moments it is running, I can log in to the PLC. Working fast and restarting the control many times, I have been able to configure users. I have been able to download my application. I have been able to run the application, and stop on a breakpoint. I have been able to connect with the licence manager and confirm the dongle is detected and licences are listed as OK. I see nothing wrong until the service just exits. I have found nothing in the logs. It is like the runtime just terminates with no error code or message after exactly 30 seconds. Any help would be appreciated.
Last updated: 2024-06-13

Post by fizzy-bubblech on 3.5 P20 hangs - no response ^{CODESYS Forge talk (Post)}
Colleagues, i have the same problems. At the current time, I have to use the new version of the Codesys (3.5.20.10) + Control for Linux SL 4.11.0.0, but it works unstable : theree are a lot of freezes and not-respondings. I tested this on different projects: those that were created in the current version of the project, and those that were migrated from other versions of the development environment. Compiling a project without connecting to a controller is fast enough. The first downloading of the code into the controller, too. But as soon as you need to make edits and download a new code problems begin. Codesys "freezes" at the "Generation code" stage for 15-20 minutes. And only after that time loads the code into the controller. Previously, we used version 3.5.17.60 + Control for Linux SL 4.7.0.0. The process took 1-2 minutes. Do you have any ideas how can i fix it? I will be grateful for your answers.
Last updated: 2024-06-27

Post by sushela on Temu Coupon Code 90% Off [acq615756] for First-Time Users ^{CODESYS Forge talk (Post)}
Temu Coupon Code 90% Off [acq615756]: A Comprehensive Guide Temu has emerged as a top choice for shoppers looking for quality products at affordable prices. Whether you're shopping for electronics, clothing, beauty products, or home essentials, Temu has it all. And to make your shopping experience even better, Temu offers various coupon codes that give users access to significant discounts. One of the most sought-after deals is the Temu coupon code 90% off [acq615756] for first-time users. In this article, we’ll explore everything you need to know about this offer and other popular Temu coupon codes, including those for existing customers. Temu Coupon Code 90% Off [acq615756] for First-Time Users If you’re new to Temu, you’re in for a treat! The Temu coupon code 90% off [acq615756] is a fantastic offer for first-time users, providing a massive discount on your initial purchase. This deal allows you to get your first order at almost one-tenth of the price, which is an amazing opportunity to test out Temu’s products without breaking the bank. To use the 90% off coupon: Sign up for a Temu account. Add eligible items to your cart. Apply the [acq615756] code at checkout. Enjoy your steep discount and complete your purchase. This offer is usually limited to first-time users, so if you’re already a registered user, keep reading for other exciting discount options. Temu Coupon Code $100 Off [acq615756] The Temu coupon code $100 off [acq615756] is another high-value offer, perfect for customers making larger purchases. This coupon gives users a $100 discount on their order, which is especially helpful when buying high-priced items or bulk purchases. While some restrictions may apply (like minimum order values), the $100 off coupon is a powerful way to slash your total cost significantly. Temu Coupon Code $40 Off [acq615756] Looking for a smaller yet substantial discount? The Temu coupon code $40 off [acq615756] is ideal for mid-range purchases. Whether you're picking up household essentials or indulging in fashion items, this $40 discount can make your shopping much more affordable. Keep an eye on the terms, as there may be minimum purchase requirements or product restrictions tied to this code. Temu Coupon Code 2024 [acq615756] for Existing Customers Many coupon offers tend to focus on new users, but the Temu coupon code 2024 [acq615756] is specifically designed for existing customers. If you’ve already shopped on Temu before, this code allows you to continue enjoying discounts without creating a new account. While the exact discount may vary, the 2024 [acq615756] code typically offers a percentage off or a flat discount on eligible items, helping loyal customers save on their next purchase. Temu Coupon Code for Existing Customers [acq615756] If you’re an existing customer, don’t worry—you can still benefit from attractive deals. The Temu coupon code for existing customers [acq615756] offers various levels of savings. Although many top discounts target new users, Temu ensures that returning shoppers also get the chance to save. The [acq615756] code for existing users can provide anywhere from 10% to 50% off on selected items or offer a flat discount depending on the promotion at the time. Always check the latest terms before applying this coupon. Temu Coupon Code $300 Off [acq615756] For those making big purchases or shopping for expensive items, the Temu coupon code $300 off [acq615756] can be a game-changer. This discount allows users to save up to $300 on their total order, making it one of the highest-value coupons available on the platform. This offer is generally tied to larger order values and specific products, so make sure your cart meets the minimum spend before attempting to redeem it. Temu Coupon Code $120 Off [acq615756] The Temu coupon code $120 off [acq615756] strikes a balance between mid- and high-tier purchases. With this code, you can get a $120 discount on qualifying orders, providing excellent savings for those looking to buy electronics, furniture, or other pricier items. This code is perfect for users who want a substantial discount but aren’t making purchases large enough to qualify for the $300 off coupon. Temu Coupon Code 50% Off [acq615756] The Temu coupon code 50% off [acq615756] is a versatile discount that works across a broad range of products. Whether you're shopping for home goods, fashion, or tech accessories, this code can halve your total cost, making it one of the most popular offers among shoppers. The 50% off coupon can be applied to eligible items in your cart, though it might come with certain conditions such as a minimum spend or item restrictions. Be sure to review the specific terms before using the code. How to Use Temu Coupon Code [acq615756] Using any of the Temu coupon codes, including [acq615756], is simple and straightforward. Here’s a step-by-step guide: Create or Log in to Your Temu Account: If you’re a first-time user, sign up for a new account. If you’re an existing user, simply log in. Add Items to Your Cart: Browse through Temu’s vast selection of products and add eligible items to your cart. Apply the Coupon Code: Enter [acq615756] or the relevant code in the promo code section at checkout. Complete the Purchase: Review the final price, and if everything looks good, proceed with your payment and enjoy your savings. Conclusion Temu offers a variety of coupon codes that can help both new and existing customers save significantly on their purchases. Whether you’re looking for a 90% off coupon for your first order or a $300 off coupon for large purchases, there’s a code that fits your needs. The Temu coupon code [acq615756] is particularly valuable, offering a range of discounts that can be applied to multiple orders. Make sure to check the specific terms and conditions of each offer to maximize your savings. Happy shopping!
Last updated: 2024-10-26

Post by sushela on Temu Promo Code [acq615756] for Existing Customers 2024 ^{CODESYS Forge talk (Post)}
Temu Promo Code acq615756 for Existing Customers in 2024 Temu is known for offering unbeatable deals across a wide range of products. In 2024, existing customers can enjoy even greater savings with the Temu promo code acq615756. Whether you're a loyal shopper or returning for a second purchase, this code opens up exciting opportunities for discounts. In this article, we’ll dive into everything you need to know about using Temu promo code acq615756 as an existing customer. What Is the Temu Promo Code acq615756 for Existing Customers? Promo code acq615756 is one of Temu’s top offers for 2024, designed to reward loyal customers who have previously made purchases. Unlike many promotions that only target first-time buyers, this code provides a discount on purchases made by existing customers. It's an ideal way to enjoy continued savings on Temu’s vast collection of products. How Much Can Existing Customers Save with Promo Code acq615756? By applying promo code acq615756, existing customers can unlock significant discounts, often ranging from 30% to 50% off on select products. This generous offer allows regular shoppers to continue enjoying budget-friendly prices without needing to create new accounts or qualify as first-time buyers. How to Use Temu Promo Code acq615756 as an Existing Customer To use the acq615756 promo code, follow these simple steps: Log in to your existing Temu account. Browse through the products you want to buy and add them to your cart. At checkout, locate the “Promo Code” box and enter acq615756. Hit apply, and the discount will be instantly applied to your order. Whether you’re purchasing electronics, fashion, home goods, or beauty products, this code ensures you're saving more on every order. Eligibility Requirements for Using Promo Code acq615756 Existing customers must meet certain criteria to be eligible for using this promo code. These requirements include: Having made at least one previous purchase on Temu. The promo code may have minimum order requirements, depending on the promotion terms for 2024. The code may only be valid for certain categories or products, so check the terms before finalizing your purchase. 5. Best Practices for Maximizing Savings as an Existing Customer Here’s how you can make the most of Temu promo code acq615756: Combine with other offers: Temu often allows promo codes to be used alongside other ongoing promotions, such as seasonal sales or flash discounts. Subscribe to Temu’s newsletter: Keep an eye on Temu’s email updates for announcements about limited-time offers and additional discounts for existing customers. Shop during major sale events: Applying the promo code during Black Friday, Cyber Monday, or Holiday Sales can maximize your savings on top of already discounted prices. 6. Are There Any Restrictions on Temu Promo Code acq615756? While promo code acq615756 offers substantial savings, it may come with a few restrictions: Expiration date: Check the validity of the code as some offers are time-sensitive. One-time use: The promo code may be redeemable once per customer, so plan your purchases accordingly. Limited categories: In some cases, the discount may not apply to specific product categories such as electronics or luxury items. 7. Frequently Asked Questions (FAQs) About Temu Promo Code acq615756 for Existing Customers Q1: Can I combine Temu promo code acq615756 with other discounts? Yes, you can often combine this promo code with other ongoing sales and offers. However, always check the terms and conditions to confirm if stacking is allowed. Q2: Is Temu promo code acq615756 available for existing customers only? Yes, this code is specifically tailored for existing Temu customers. If you're a first-time buyer, you may need to look for other codes. Q3: Does Temu promo code acq615756 have a minimum purchase requirement? In some cases, this promo code may require a minimum order amount, typically around $50 or more. Be sure to review the specific promotion details when applying the code. Q4: How long is the promo code acq615756 valid? The validity of Temu promo code acq615756 may vary. It’s advisable to use it as soon as possible to avoid missing out on the discount. Q5: What if the promo code doesn’t work at checkout? If the code doesn’t apply, double-check that you're logged into your existing customer account and that you’ve met the eligibility criteria such as product selection or minimum order requirements. Temu’s 2024 Promo Strategy for Existing Customers Temu recognizes the importance of retaining loyal customers, and offering exclusive promo codes like acq615756 is part of their broader 2024 strategy. Existing customers who regularly shop on the platform are rewarded with ongoing deals, ensuring they receive value for their repeat business. This customer-centric approach helps Temu maintain its competitive edge in the e-commerce space. Why Existing Customers Should Take Advantage of Promo Code acq615756 If you’ve previously shopped on Temu, now is the perfect time to take advantage of the acq615756 promo code. Not only does it offer you substantial savings, but it also rewards you for your loyalty. With this code, there’s no need to wait for major sales; you can enjoy deep discounts on your favorite products all year long. Conclusion Temu promo code acq615756 for existing customers in 2024 is an unbeatable way to save on repeat purchases. Whether you're upgrading your tech gadgets, revamping your wardrobe, or sprucing up your home, this code helps you stretch your budget further. Log in to your Temu account today, apply acq615756, and enjoy exclusive discounts tailored just for you. Don't miss out on this opportunity—start saving with Temu now!
Last updated: 2024-10-26

Post by dwpessoa on CNC Jumps G20 - SMC_NCInterpreter and long time to process ^{CODESYS Forge talk (Post)}
I am studying and developing a Softmotion+CNC system for a machine that executes multiple pieces. The G code program is written by the machine operator and each cycle execute 1 piece. The programs are large, exceeding 1000 lines and using up to 8 axes (X, Y, Z, A, B, C, P and Q). The machine needs to run cyclically, executing N pieces (selected by the Operator)... so I tested it using Looping and counters (G36 G37 and G20) and it worked, but it takes a long time to process, and the more pieces I need, the longer the processing time and this is totally impracticable. I found this solution which was very good, and for a few cycles it works well, but for 99999 pieces of a program with 1000 lines, it doesn't work very well... Another solution I tested is to maintain the interpolator with an automatic restart, that is, I load the program without looping (without G20) and give it another start as soon as it finishes. This partially resolved it, but there is still a delay in processing SMC_NCInterpreter in each restart :(. Another solution I thought of is to manually create the SMC_GEOINFO structure and then reuse it, avoinding the Interpreter, but reading the documentation and checking the structure filled by standard blocks, I noticed that there doesn't seem to be a "JUMP" function in the structure! In other words, the SMC_NCInterpreter actually keeps copying and copying the program section for each jump (G20)... If I repeat a 10-line program 1000 times, I will have a structure with more than 10000 lines... possibly this is the cause of take so long to process. Has anyone ever had a problem like this? I believe the same thing happens with typical applications with manipulator robots using Codesys in continuous cycles, and I would like to know if there is any solution, or even if I am misinterpreting the G20 question in SMC_GEOINFO. Thanks!
Last updated: 2023-09-20

Sort by relevance or date