Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
yes i took the library from another forum: https://forge.codesys.com/forge/talk/Runtime/thread/f1400b71b6/, it is made for the ads1115 but the ads1015 is almost the same device with same adresses i only changed the divide value of the analog value, because thats the only difference between the ads1115 and ads1015.
Last updated: 2024-11-07

Post by ellocco on Leitungsverzweigung mit einem existierenden Block (z.B. AND-Glied) zu verbinden ^{CODESYS Forge talk (Post)}
Is it possible under CODESYS V3.5 SP18, to connect a split (german Leitungsverzweigung) with an existing block (e.g. AND-module)? Or to connect the output of an existing block to the input of an existing block (e.g. OR-block)? Any ideas? P.S.: Sorry for the german title, I do not know how modify the title.
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Ok, this is a test programme with ADS1115. It is currently configured for the TCA9548 muxboard. If you want to run the ADS1115 single, then change the settings to the default values: ‘Is Multiplex:’ False ‘Stage mux channel numbers:’ [0,0,0,0,0,0,0,0,0] It is also important that the libraries are installed correctly here. But should be in this project
Last updated: 2024-11-07

Post by dom4u on Using PEAK CAN PCIe card (IPEH-004040) with Codesys Control RTE V3 ^{CODESYS Forge talk (Post)}
The problem is that newer PeakCAN cards are with CAN FD support and SJA1000 compatibility isnt mentioned anymore on website. anyway, is it possibile to add a seperate entry for it in: [CmpSJACanDrv] ? Edwin, can you give us a hint how to format it?
Last updated: 2024-12-16

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
After correspondence with Mr Schwellinger from Codesys the resolution for this was to uninstall the SL 4.14 and install SL 4.13 on the device. Once this was done the licensing worked as expected. I noted that the container then showed a Version 3.00 and not 0.00.
Last updated: 2025-01-11

Post by jeffersonhui on SP20 Visualization Element Dynamic Colors ^{CODESYS Forge talk (Post)}
I am using Codesys SP20 patch 5 and in a visualization element, the "Color variables" section does not have a section to set up dynamic color values linked to variables. In a previous version (SP18), I get the option to add variables for Normal & Alarm state colors. Does anyone know how to get the dynamic color variables to work?
Last updated: 2025-02-19

Post by helcioburd on How long can a WSTRING be in CodeSys V3? ^{CODESYS Forge talk (Post)}
Thank you, very useful information. I did a library for serial communication and could not understand the reason only 256 chars could be read (after sending more than 256). Following your suggestion, I can now send any number of chars and everything will be received.
Last updated: 2025-03-02

Post by eaglealex on Length of string and Array of bytes ^{CODESYS Forge talk (Post)}
Thank you for your answer! I know that 0 will be the end of the string. I checked it. There is no 0 in array of bytes. I made screenshots. There is array of bytes, aborted string and the result of my test via online converter.
Last updated: 2025-04-02

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to go to Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by bjohnson on CODESYS and Win10 - "the version profile is not valid" error ^{CODESYS Forge talk (Post)}
We just had this problem today when our IT updated a group policy. You need to to got Local Group Policy Editor > Local Computer Policy > Computer Configuration > Windows Settings> Security Settings > Local Policies > Security Options. Set "System Cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" to DISABLED
Last updated: 2025-05-23

Post by andrewb on Codesys Visu Update Frame Parameters No Dialog Appears to update ^{CODESYS Forge talk (Post)}
I'm also seeing this issue, my instances of the frame will date but not for new parameters that I add to it. Has anyone seen a fix or a way to force the parameter update other than recreating all the frame instances?
Last updated: 2025-06-06

Post by ganassa on Custom colors in Ladder diagrams? ^{CODESYS Forge talk (Post)}
How can I change the default color - blue - for active lanes, contacts and coils? I'd like a lighter color. After having failed in finding a related option in the IDE, I've looked at the "Default.editortheme" file in CODESYS' directory, but couldn't see any related option. Thank you
Last updated: 2025-07-09

Post by felixm on Unable to select VisuDialogs.Numpad in Open Dialog input configuration ^{CODESYS Forge talk (Post)}
I'm trying to open the VisuDialogs.Numpad dialog to enter a new temperature setpoint on one of my VISU screens. For some reason, the numpad dialog does not appear as an option in the Open Dialog dropdown in my input configuration. I'm very new to CODESYS, so sorry if this is a simple fix/known item XD.
Last updated: 2025-07-10

Post by ustad41 on Cam Blending ^{CODESYS Forge talk (Post)}
Hi everybody, I want to execute more than once cam fb simultaneously so blending cam and thus blending velocity without stop motion. But as far I know codesys dont support directly cam blending. But I beleeive there is a some solving. I request your support. But there is important thing is I want to change cam table cam on the fly. For example FlyingSaw application change cutting lenght.
Last updated: 2025-08-01

Post by astrum on OPC UA Information Model Error "Dimensions must be empty" ^{CODESYS Forge talk (Post)}
Hello everyone, does anyone know what this error means: Internal Error in code generation for http://opcfoundation.org/UA/DI/: Dimensions must be empty. I use the standard information models from Codesys and haven't even called the Information Model, but my program can't compile. the only thing I did was to insert the Communication Manage.
Last updated: 2025-08-11

Post by ulvis on Where to find the OPC-UA Information Model Repository ^{CODESYS Forge talk (Post)}
Now, for CODESYS v3.5 SP21 I can no longer find the "OPC UA Information Model Repository" entry to add as a command. In the "Tools" menu it is listed but greyed out, reporting "Plug-in is not available". So how do I add the Plug-in?
Last updated: 2025-08-14

Post by gseidel on Cam Blending ^{CODESYS Forge talk (Post)}
Hi ustad41, cams can be buffered using the BufferMode input of MC_CamIn. If the end- and start-velocity of two buffered cams are not zero, there will be no stop. Not sure this answers your question. Cams can be changes on the fly by aborting the active cam. Please see [0] for details on switching cams. [0] https://content.helpme-codesys.com/en/CODESYS%20SoftMotion/_sm_cam_switch_between_cams.html Best regards, Georg
Last updated: 2025-09-08

Post by rickwot809 on Codesys Soft PLC OPC UA server ^{CODESYS Forge talk (Post)}
Enabling Anonymous Login 1. Navigate to 'Device' > 'Communication Settings' > 'Device'. 2. Next, click on 'Change Runtime Security Policy'. 3. In the new window, find and check the box for 'Allow anonymous login'. After completing these steps, you should be able to communicate with the OPC UA server.
Last updated: 2025-09-11

Post by mondinmr on What happened to Python? ^{CODESYS Forge talk (Post)}
What happened to Python? I’ve just installed version 3.5.21.3 of the CODESYS development environment. I’m coming from 3.5.19.5. What happened to Python scripting! We rely heavily on it for the automatic generation of thousands of lines of code! It seems absurd to me that such an important feature has been removed!
Last updated: 2025-10-01

Post by toby on Codesys Control Raspberry PI 4.10.0 - missing 'Update Raspberry PI' option ^{CODESYS Forge talk (Post)}
Hi, Mine is the same, both using v3.5 SP17 patch 6, and v3.5 SP19 patch 5 when using anything newer than v4.8.0 the same issue as above occurs. Checked the 'Customize' window in case it was hidden/disabled in there but couldn't find it. Thanks for the help on this. Toby
Last updated: 2024-01-09

Post by hfelek on *SOURCEPOSITION* App = [Application] area=0, offset = 0 on default example ^{CODESYS Forge talk (Post)}
Hello, I am trying to run CmpTemplate component provided by Codesys for version 3.5.17. I call MyExternalFunction from the component but I get error as shown below. I see component is loaded successfully on runtime logs. I feel like I am missing something basically.
Last updated: 2024-01-15

Post by jst69 on Python script: Launch Codesys, Execute Script, Exit Codesys ^{CODESYS Forge talk (Post)}
Dear all: Question about scripting: I am creating a .NET program that is supposed to Open codesys, open template project, export a bunch of pou, then exit codesys. Launch works, Open project works, Export works, But how do i tell codesys to close itself? I can tell windows to terminate codesys, but i would prefer to do it properly. from __future__ import print_function import sys import System proj = projects.primary # We're interested in POU nodes: POUGuid = Guid("6f9dac99-8de1-4efc-8465-68ac443b7d08") # We collect all POU nodes in that list. pous = [] # From the parent node on, we recursively add POU nodes: def CollectPous(node): if node.type == POUGuid: pous.append(node) else: for child in node.get_children(): CollectPous(child) # Now we collect all the leaf nodes. for node in proj.get_children(): CollectPous(node) # We print everything just to know what's going on. for i in pous: print("found: ", i.type, i.guid, i.get_name()) # And now we export the files. for candidate in pous: # We create a list of objects to export: # The object itsself objects = [candidate] # And sub-objects (POUs can have actions, properties, ...) objects.extend(candidate.get_children()) # And the parent folders. parent = candidate.parent while ((not parent.is_root) and parent.is_folder): objects.append(parent) parent = parent.parent # Create an unique file name: if len(sys.argv) == 1: filename = "parent\\%s.export" % (candidate.get_name()) else: filename = "%s\\%s.export" % (sys.argv[1],candidate.get_name()) # print some user information print("exporting ", len(objects), " objects to: ", filename) # and actually export the project. proj.export_xml(objects, filename) proj.close() print ("script finished.") System.exit(0) // Dont work .NET: public static void Export(string path,string proj) { if (checkSettings()) { var p = new System.Diagnostics.Process(); p.StartInfo.FileName = Properties.Settings.Default.CSVersion +"\\CODESYS\\Common\\CODESYS.exe"; p.StartInfo.Arguments = " --Profile=" + qoute(Properties.Settings.Default.CSProfile) + " --culture=en" + " --project=" + qoute(path + "\\" + proj) + " --runscript=" + Properties.Settings.Default.LastOpenProjectPath + "\\INPUT_DATA\\SCRIPT\\Export.py" + " --scriptargs:" + qoute(path) ; p.StartInfo.RedirectStandardOutput = true; p.StartInfo.UseShellExecute = false; p.StartInfo.CreateNoWindow = false; p.Start(); p.StandardOutput.ReadToEnd(); p.CloseMainWindow(); p.Close(); } }
Last updated: 2024-01-16

Post by rkohser on Python Script for Finding "Last saved with" Value ^{CODESYS Forge talk (Post)}
Hi jkilburn, I have the exact same issue and thought I would search a solution on this forum. I see you did not get any answer, did you find a solution on how to extract the last saved version of codesys from the project file ? Roland
Last updated: 2024-01-29

Post by i-campbell on Not able to see input data coming from eip adapter on codesys ^{CODESYS Forge talk (Post)}
Hello, I think you can try to change the Connection from Multicast to Point to Point. Please also make sure your windows firewall is allowing the correct UDP ports inbound for ethernet IP. You might also need to increase the RPI, so it times out slower.
Last updated: 2024-03-07

Post by strannik on Estun servo with codesys ^{CODESYS Forge talk (Post)}
Hello dear colleagues. I have an ESTUN PRONET servo. I'm trying to control via softmotion over the CANopen bus. There is no Ethercat bus in this servo model. In another project,using Ethercat , I controlled four axes. I have problems with ESTUN PRONET servos. A DSP-402 driver mismatch is likely. I would be very grateful for your help in solving this problem.
Last updated: 2024-03-10

Sort by relevance or date