Post by davidf on Error trying to activate the demo Git licence ^{CODESYS Forge talk (Post)}
The CodeMeter Control Center log shows the following: 2024-10-11 21:02:13: Entry (6000437:8747) not found - Event WB0200 (ENTRY NOT FOUND), Request IP-Address local(IPV4) (SID 0xc079 / 0x00) with StationShare Mode 2024-10-11 21:02:13: API Error 200 (ENTRY NOT FOUND) occurred!
Last updated: 2024-10-11

Post by pietrobalint on Persistent variables are not read after initialization ^{CODESYS Forge talk (Post)}
Hi, I realized that if I replug the power supply the persistent variables lost their value with the new software too. Cold reset do not affect the variables value but hardware reboot still reset the values. Application Composer can't be activated. What is the solution?
Last updated: 2024-10-11

Post by gabor-n on PNIO Connect Parameter Error ^{CODESYS Forge talk (Post)}
It's a bit confusing, the two RPI is the same (board, OS, runtime, programing with Codesys V3.5 SP20 P2) but the one has a codesyscontrol.cfg file and the other has a codesyscontrol_user.cfg file. Shouldn't be the same? And because I over Codesys 3.5 SP 12 this would be the '_user.cfg' for both. Attached...
Last updated: 2024-10-11

Post by davidmic on What is this ST syntax? ^{CODESYS Forge talk (Post)}
I found some structured text code which contained this statement: bHidden:= TRUE(*NOT _somevariable*) I haven't seen TRUE() used like a function before, and I also haven't seen the enclosing asterisks * * before. What do they do? (sorry if this is a duplicate question, I don't know what words to use to search for this syntax)
Last updated: 2024-10-11

Post by janber on REFERENCE TO in an array ^{CODESYS Forge talk (Post)}
Hi all, in the online help it written, that array of reference to data type is not possible. Ok... but if I create array of struct of reference to - everything works fine - please see the screenshots: and it works this way OK. Is it intention or error in compiler 3.5.18.20 and we should avoid it? Thanks a lot, Jan.
Last updated: 2024-10-14

Post by jarnok on How to know if output if function block is used ^{CODESYS Forge talk (Post)}
Hi, Is it possible to know of an output of a function block is used? I've found there is a way to find unused inputs of a fb, through the attribute: is_connected. But I'm wondering if the same can be done for an output. Thanks in advance!
Last updated: 2024-10-15

Post by csu-chris on No file found ^{CODESYS Forge talk (Post)}
I'm having trouble getting started with the SysFile library. I tried copying and running the code found here: https://forge.codesys.com/forge/talk/Engineering/thread/f17c3d0e64/ Every time I try to run the file handle pointer returns: 16#FFFFFFFFFFFFFFFF <dereference of="" invalid="" pointer=""></dereference> I can see the file when I look in the Device -> Files window Any idea what I'm doing wrong?
Last updated: 2024-10-15

Post by eschwellinger on Bibliothek: floatingpointutils ^{CODESYS Forge talk (Post)}
naja die compiled library hast du ja - du hast halt eine exception - und dann wirst du gefragt ob du das ganze Debuggen willst. Die offene Bibliothek wirst du nicht bekommen - daher würde ich so vorgehen: Dein Projekt hier mal anhängen so das man mal draufschauen was du genau aufrufst und wie.
Last updated: 2024-10-18

Post by lbartik on MPC predictive control ^{CODESYS Forge talk (Post)}
Would this work? https://www.mathworks.com/hardware-support/codesys.html I'm also interested in real-world MPC and have no idea where to start. There is an exciting Python library that is also beyond my grasp: https://www.do-mpc.com/en/latest/index.html Step 1, get PhD(s). Step 2, get job in aerospace/robotics. Step 3, return 15 years later to share this knowledge?
Last updated: 2024-10-19

Post by davidbo on Modbus: Is there a way to get the channel index from the channel name? ^{CODESYS Forge talk (Post)}
When I use the FUNCTION_BLOCK ModbusChannel I have to sepcify the integer iChannelIndex It can easily go wrong if one has many channels. It would be better if one could use the name. Is that possible? Attached a snippet of the channel name and the channel index to the left.
Last updated: 2024-10-21

Post by spoun on Problem with edge gateway config mode ^{CODESYS Forge talk (Post)}
I installed patch 3 now and i get a new message, although i located and modified the files in system32 and sysWOW64 still doesn't work. One thing i noticed is thta in system32 folder CODESYSGatewayV3 now i have two different XXXXXXXX files with the latest being created today at the time of installation
Last updated: 2024-10-21

Post by dekelec on TrueType font problem ^{CODESYS Forge talk (Post)}
Initially I had the same problem in CoDeSys when selecting a newly installed TTF font, while CoDeSys was running. I solved it by closing Codesys and running it again to restart the initialization process. After that, using the new font did not pop up errors. I also had cases with files that had a ttf extension, but were actually not TrueType.
Last updated: 2024-10-22

Post by daniel on SysFileOpen not working ^{CODESYS Forge talk (Post)}
Hello, I have the same problem now with 3.5.20 Patch 3. Normally it works if I ad in CODESYSControl.cfg: [SysFile] ForceIecFilePath=0 (This told me codesys last time) I try to use the placeholders but without success. Something special is that the Files are not in C:. The Plc Configuration Path is not as usual C:\ProgrammData\CODESYS\CODESYSControlRTEV3\, it's E:\Control.
Last updated: 2024-10-23

Post by denis777 on Dynamische Datenquellenanbindung ^{CODESYS Forge talk (Post)}
Moin zusammen, ich habe vor die OPC UA-Verbindung dynamisch einzubinden und es auch nach der Codesys-Anleitung probiert. Dabei hatte ich aber das Problem, dass ich zusätzlich zu den Config-Variablen auch noch eine statische URL angeben muss, was dann aber den Sinn der dynamischen Vergabe verfehlt. Hat dazu schon jemand Erfahrungen gesammelt und kann mir vielleicht Tipps geben, was ich noch beachten muss? LG Denis
Last updated: 2024-10-24

Post by denis777 on Dynamische Datenquellenanbindung ^{CODESYS Forge talk (Post)}
Moin zusammen, ich habe vor die OPC UA-Verbindung dynamisch einzubinden und es auch nach der Codesys-Anleitung probiert. Dabei hatte ich aber das Problem, dass ich zusätzlich zu den Config-Variablen auch noch eine statische URL angeben muss, was dann aber den Sinn der dynamischen Vergabe verfehlt. Hat dazu schon jemand Erfahrungen gesammelt und kann mir vielleicht Tipps geben, was ich noch beachten muss? LG Denis
Last updated: 2024-10-24

Post by js123 on csv datei einlesen und verarbeiten ^{CODESYS Forge talk (Post)}
hallo zusammen, bin leider in codesys ein absoluter Neuling, brauche deshalb ein wenig Hilfe Ich möchte gern eine Excel-CSV Datei in codesys einlesen und die Daten weiter verarbeiten. Kann mir jedemand diesbezüglich helfen bzw. zeigen wie man vorgehen muss oder hat jemand sogar schon einen fertigen Code?! Grüße und Dankeschön
Last updated: 2024-10-28

Post by eschwellinger on RS485 CAN HAT to Cosesys ^{CODESYS Forge talk (Post)}
Hi if you add in (ttyAMA0 should fit to your HAT's device [SysCom] Linux.Devicefile.1=/dev/ttyAMA0 to /etc/CODESYSControl_Usr.cfg since 4.12.0.0 version /etc/codesyscontrol/CODESYSControl_Usr.cfg then access in CODESYS with Com1 should do it. Keep in mind that only adapters work (for RS485) which do determine the send/receive direction in hardware
Last updated: 2024-10-28

Post by phoward131 on Alarm Table Filtering ^{CODESYS Forge talk (Post)}
I actually just found the solution maybe. If anyone else is running into this, go to your Project Settings > Visualization > Advanced (check 'Visible' to see advanced settings) > UNCHECK 'Activate property handling in all element properties.' I am not sure what else unchecking this might affect but it seems to allow the alarm table to be filtered as expected.
Last updated: 2024-10-28

Post by phoward131 on Alarm filtering latch variables ^{CODESYS Forge talk (Post)}
I am having the exact same issue and was wondering if you ever found the problem? The sample program does exactly what it's supposed to with filtering but when I implement it the exact same way in my program, the alarm list just goes blank when I attempt to apply a filter.
Last updated: 2024-10-28

Post by phoward131 on Alarm filtering latch variables ^{CODESYS Forge talk (Post)}
I actually just found the solution maybe. If anyone else is running into this, go to your Project Settings > Visualization > Advanced (check 'Visible' to see advanced settings) > UNCHECK 'Activate property handling in all element properties.' I am not sure what else unchecking this might affect but it seems to allow the alarm table to be filtered as expected.
Last updated: 2024-10-28

Post by pascaljt on Warning code C0373 ^{CODESYS Forge talk (Post)}
Hello, I wrote a function block for a controller but I have a warning code C0373 "expression or part of it has no effect" and the sub routine which contain my function block is underlined in blue. Despite, the FB works perfectly. Do you know why I have this warning ? Thanks. Pascal.
Last updated: 2024-10-30

Post by kezicris on (no subject) ^{CODESYS Forge talk (Post)}
Bonjour, Il s'agit de l'exemple de Codesys : RegrigeratorControl A un autre endroit de ce site, j'ai un message qui me dit que cette question ne sera pas traitée si je n'ai pas de licence. Pourquoi ? Je ne souhaite pas créer un projet mais déjà arriver à refaire et simuler des exemples existants. Merci d'avance si vous me répondez. Bonne soirée
Last updated: 2024-10-30

Post by pixsys on loading delay with the option "check client animations and overlay of native elements" ^{CODESYS Forge talk (Post)}
Hi, the option "Support client animations and overlay of native elements" needs a very powerful graphics accelerator in the system. I'm using the Pixsys srl "TC series" HMI with the code "P3" (so a 4+4 cores CPU) that runs very well also with this option active.
Last updated: 2024-11-06

Post by hemuv on Open Numpad with VU.FbOpenDialogExtended ^{CODESYS Forge talk (Post)}
Hello Barton, I try to log the changes in Numpad (upon Ok button pressed) that an Element name/Element text variable is changed from so to so. How to get the Element name (or text fields Text Variable) from where the Numpad is called? Numpad is Invoked from Inputconfiguration->onMouseDown->Write a variable. Thanks
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
yes i took the library from another forum: https://forge.codesys.com/forge/talk/Runtime/thread/f1400b71b6/, it is made for the ads1115 but the ads1015 is almost the same device with same adresses i only changed the divide value of the analog value, because thats the only difference between the ads1115 and ads1015.
Last updated: 2024-11-07

Sort by relevance or date