Post by davidbo on Toradex and CODESYS and licensing ^{CODESYS Forge talk (Post)}
I am evaluating a Toradex product for use with CODESYS. Toradex and CODESYS are partners, but using "CODESYS Virtual Control for Linux ARM64 SL" together with a carrier board "Verdin mallow" However it doesn't seem to be a soft container for licenses. So how do I install a license
Last updated: 2025-10-20

Post by egau on Mutate Hash table value ^{CODESYS Forge talk (Post)}
Hi, using the ElementCollections Library, why isn't it possible to mutate a value found within a HashTable? From what I understand, the only way to change a value would be to use the RemoveByKey(), followed by AddKeyValuePair(). My goal is to use a Data Structure that works like a Dictionary in Python. The HashTable seems to come close to this, except that the values themselves seem to be immutable... In python, we can mutate a dict easily (see attached picture).
Last updated: 2024-08-29

Post by totorovic on Hard shutdown: no code on device after power on ^{CODESYS Forge talk (Post)}
However, if faulty EtherCAT cables were the issue, why wouldn't the error occur during normal operation? Why would bad cables only cause problems during a hard shutdown? I don't have the answer to this question. One last question: When you encountered this behavior, did you see a similar error in your logs? i.e, an "AccessViolation" exception in the EtherCAT Task Yes. It was the exeption you can see in attached file.
Last updated: 2024-10-03

Post by xabier on Problem Update new version Master ethercat ^{CODESYS Forge talk (Post)}
Hi, I have a project in Codesys...and i need update a new version of amster ehtercat and i have a problem. The origianl version with create of project was 3.5.13.10 I can change version to Master Ethercat 3.5.13.10 to 3.5.16.70 but i can´t update the last version 4.4.0.0 (I attached the screen "Version Master OK-NO OK"). In the moment update to the last version appear a lot of error("Version Master NO OK") Can anyone help me please?
Last updated: 2024-10-25

Post by xabier on Problem Update new version Master ethercat ^{CODESYS Forge talk (Post)}
@eschwellinger...How can migrate to the new version if i can´t do it??? The project generate with CODESYS DEvelopmentsystem Version=3.5. SP16 Path9 ...I want open with my version 3.5 SP19 Patch 4...I can´t update the my last version of master ethercat(4.4.0.0) and is not possible. My situation is not the comment tell you ...my situation is impossible upadte new version of master ehtercat if you create the project with older version. Have you got a idea? Can you help me please?
Last updated: 2024-10-29

Post by s1ack on PFC200 Will soft-container & IIoT license survive a firmware update? ^{CODESYS Forge talk (Post)}
I have an IIoT License activated on a PFC200 with older firmware 2.08.32 (11). If I flash it to the latest available 4.05.10 (27) does the license get destroyed? I have a back up file '3SLicenseInfo.tar'. But this looks quite a bit different form the backup I got from more modern firmware... 'CMLicenseNew.WibuCmRaU'. Can the new license manager restore it from the old .tar?
Last updated: 2024-11-12

Post by askic on PLC error log help ^{CODESYS Forge talk (Post)}
Hello, I'm using Codesys 3.5.20.0 version and I noticed that even with the most basic standard project create, there are error messages like shown in the acttached picture. The similar questions are already asked here on the CODESYS Forge Talk, but remained unanswered. Exact screenshot is attached, but essentially I would like to know which component in the Codesys has CmpID = 0x00000019 and what this Timeout means?
Last updated: 2025-01-10

Post by nz-dave on FAILURE TO OPEN PROJECT ON ANOTHER COMPUTER ^{CODESYS Forge talk (Post)}
just now i have tried loading the achive file from today at work. using 3.5.20.4 same as at work. when i open the project it says " prject inspection, this project has been saved with a different version(codesys v3.5 sp20 patch 4).? one option in the above "project inspection" window just wants to download that same version again. the other option leads no where as it say the required add ons cant be resolved. just end up going around in circles.
Last updated: 2025-01-22

Post by wayne-riesterer on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
Hello Can anyone see any problems with constant assignment as in the following statement: Coils[0] := Coils[0] OR (Buttons[0] AND Sensors[0] > 6); Rather than using the more verbose and vertically-larger: IF NOT Coils[0] AND Buttons[0] AND (Sensors[0] > 6) THEN Coils[0] := TRUE; END_IF Also, is the test expression short-circuited in the latter case? In other words, will the runtime move on after it sees Coils[0] = FALSE AND? Thanks
Last updated: 2025-03-07

Post by installwhat on Ethercat and profinet on together ^{CODESYS Forge talk (Post)}
I'm curious about the impact of having profinet and Ethercat (specifically softmotion so frame at start of task?) running together. Since it's advised to access the data from the bus task should have both profinet io and ethercat on the same task? Are there any implications around this one should be aware of especially since the frame at task start is just, so far as I'm aware, an ethercat thing? Thanks
Last updated: 2025-04-08

Post by glutenaron on Safety drive EL6900 and mitsubishi ^{CODESYS Forge talk (Post)}
Hi, Im wokring to get my servo mitsubishi mr-j5-g40-rnj1 working with my safety drive. I have as you can se in the picture Ek1100 koppler and EL6900 as safety plc. My questien is how do i connect the safety_drive to the SM3_Drive_ETC_Mitsubishi_MelServo_J5_Axis1 down below? I get the error ((Logical I/Os]: The logical device 'Safety_Drive' is not mapped to any physical device.)) but how do i map this? regard
Last updated: 2025-05-13

Post by fschuler on No connection to Raspberry at runtime installation ^{CODESYS Forge talk (Post)}
Hi, I try to install the Codesys realtime in a Raspberry PI 3B+. When I click on the installation button I get always the message No connection to device: An established connection was aborted by the server. Raspberry 3B+ with newest raspberry PI OS. Codesys 3.5.15 Patch 1 Codesys Runtime Package 3.5.16.20 SSH is activated. I can login with Putty Ping is possible IP address search is possible Just the installation is not started.
Last updated: 2025-07-23

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by bmatlove on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
I'm trying to firm up alarming of axis faults. Declutter the code and figure out what's what. Diving into it, I see the AXIS_REF_SM3 function block provides uiDriveInterfaceError and dwErrorId, but I can't find any significance of these further than Drive interface error number Parameter number: 1014 and Drive specific error identifier, parameter number: 1031, respectively. Is there some corresponding appendix I could use to decode these? Also, is there any relation to the Error ID (of type SMC_Error) of the MC POUs? MC_Jog, MC_Reset, MC_MoveRelative, etc? If so, are the above errors redundant? Thanks in advance.
Last updated: 2025-09-22

Post by wedahitha on Could not open library 'SysSocket23, ^{CODESYS Forge talk (Post)}
Hi there, I am trying to open a codesys project done by someone else and Once I install all the libraries I get this error [ERROR] : Library Manager [PROJECT 01: PLC Logic: Application]: Could not open library 'SysSocket23, * (System)'. (Reason: The library 'SysSocket23, * (System)' has not been installed to the system.) SysSocket23 is a standard library and I also tried using the same OSCAT library which was from the original computer that made this code. Using CODESYS V3.5 SP18 Patch 2 Please help me how to solve this problem.
Last updated: 2023-12-19

Post by felipemsgarcia on Edge Gateway online, but PLC is not online ^{CODESYS Forge talk (Post)}
Hi Edwin, The PLC is already in the automation server so nothing happens when I scan the network, however the PLC show offline (not connected). Please see logs below. [CmpLog] Logger.0.Name=codesysedge.log Logger.0.Filter=0x0000000F Logger.0.Enable=1 Logger.0.MaxEntries=100000 Logger.0.MaxFileSize=1000000 Logger.0.MaxFiles=1 Logger.0.Backend.0.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Type=0x314 ;Set the timestamp to RTC Thank you!
Last updated: 2024-01-09

Post by jinlee on Multiple WebVisu ^{CODESYS Forge talk (Post)}
Hi guys, I am new to the Visualization. I am having a problem. I have multiple web-panel to use webvisu. I have my software dowwloaded into the one PFC200. There are 3 screens connected to it. I noticed that if I switch page/visualisation on one of the screens, the others will change as well. Three screens are with different URLs that I set in the software. Is there any method to make them independently ? Kind regards, Jin.
Last updated: 2024-01-25

Post by jinlee on How do you get the CURRENT ClientData? ^{CODESYS Forge talk (Post)}
Hi there, I wonder how to use this CURRENTCLIENTID. However, what I am trying to do is to use PLC_PRG.aIndexVisu[CURRENTCLIENTID]. to switch the frame within the mainpage without affecting the other screen same as the first question of this post. However, I failed to do it. Can you tell me how to do it ? Or can you advise me on this issue
Last updated: 2024-02-07

Post by john-martin on Control SL Extension Package doubts ^{CODESYS Forge talk (Post)}
Hello everybody, I'm trying to understand the SL control extension package, more specifically, the external IODriver example, because C integration is very easy and I just made my first C component successfully. Ther External IODriver has no documentation and it's not clear how to proceed. Furthermore, there is no information on how to modify the device descriptor, which is necessary to import the device into the Codesys repository. Any advice ? Thank you in advance and best regards.
Last updated: 2024-02-28

Post by codesysjupiter on Could not be resolved - Library error ^{CODESYS Forge talk (Post)}
Hello, everyone. How are you? Please help me with my library error. When I open the CODESyS project, the error message is Could not open library “#loDrvEthernet. (Reason: The placeholder library ToDrvethemet’ could not be resolved.) I tried to find solution to fix this . and the help teach me to run this command "Update placeholder <iodrvethernet> to the newest version:" Is this right ? But I couldn't find where I input this command and how to run it. Or any other solution , please ?</iodrvethernet>
Last updated: 2024-04-12

Post by codesysjupiter on Library Error ^{CODESYS Forge talk (Post)}
Hello, everyone. How are you? Please help me with my library error. When I open the CODESyS project, the error message is Could not open library “#loDrvEthernet. (Reason: The placeholder library ToDrvethemet’ could not be resolved.) I tried to find solution to fix this . and the help teach me to run this command "Update placeholder <iodrvethernet> to the newest version:" Is this right ? But I couldn't find where I input this command and how to run it. Or any other solution , please ?</iodrvethernet>
Last updated: 2024-04-12

Post by esave on Softmotion Axis Controll ^{CODESYS Forge talk (Post)}
Hello everybody I have two of these EtherCat CiA402 stepper driver from Leadshine: https://www.leadshine.com/product-detail/EM3E-556E.html I want to controll them. I already have implemented them in Codesys with Softmotion. I see the position, the velocity and the status word so I can read everything. See picture 1. But when I want to write something like MC_Power or MC_MoveAbsolut with the SM3_Basic library it wont work and with the MC_Reset POU it shows: "SMC_R_DRIVE_DOESNT_ANSWER". See picture 2. Can somebody help me? Thanks a lot esave
Last updated: 2024-05-24

Post by paro on send appliaction files to wago plc (codesys 3.5) via ssh ^{CODESYS Forge talk (Post)}
Hi, it is enough to copy the files to /home/codesys/PlcLogic/Application and adding the lines [CmpApp] Application.1=Application to the eRUNTIME.cfg, if your Application in your program is also called "Application". Reboot -> Bootapp should be loaded. If not please check the log /var/log/runtime.log There should be a line which explains why the bootproject is not loaded.
Last updated: 2024-05-29

Post by mozed on Signature verification faited fro the following package ^{CODESYS Forge talk (Post)}
Good morning, I'm trying to open a project but codesys tells me that there are certain packages that I don't have and that I need to download them. Once the installation of the packages begins, it shows me a error that the signature of certain packages does not correspond to that coming from the accepted installation context. Do you have a solution to my problem please, it is very urgent in my work. Sincerely
Last updated: 2024-06-11

Sort by relevance or date