Post by alez on CANopen safety , SRDO error behavior ^{CODESYS Forge talk (Post)}
I have a project in which there is a Safety device in CANopen, and the PLC interfaces with it as Master. I would like to understand if it is possible to set the behavior in case one of the SRDOs that I receive from the slave is no longer received. From what I have seen, if the SRDOs are not received, the CANopen safety status becomes "Not in progress" and the mapped variables freeze at the last value detected. I want to understand if it was possible to set the variables connected to the SRDOs to take a default value (e.g. zero) in the event of a CANOpen error during reception.
Last updated: 2024-07-15

Post by gurke258 on Codesys Safety EtherCAT with Beckhoff ^{CODESYS Forge talk (Post)}
Okay, the solution was so simple... In my case, you first have to add the EL1918 and then the EL2904... then the connection is made automatically. I probably had something else before and then added the EL1918... then it doesn't catch the connection :/
Last updated: 2023-11-08

Post by cpoi on Safety EL6900 com Error ^{CODESYS Forge talk (Post)}
Hello, I using the EL6900 module with EL 1904 and EL2904 on Ethercat, and I have a ComErr on the EL6900. The FSoE Adresse : EL6900 = 1 EL1904 = 11 EL2904 = 15 Any suggestion? Thanks a lot in advance.
Last updated: 2024-04-26

Post by kevinm on Data source and safety PLC ^{CODESYS Forge talk (Post)}
I am having the same trouble. However, if I change the Login Configuration settings to 'Type: Login using the credentials determined at runtime' then the Connection information continues as 'Connection state: Connecting' and 'Error information: OK'. There is no User Management on the source PLC.
Last updated: 2024-05-16

Post by ignat on SafetyApp - Exchange 8 bits from EtherCAT Safety Module to PLC mapping issue ^{CODESYS Forge talk (Post)}
Hi transmin01, I am struggling with the same issue. Have you found out the solution?
Last updated: 2024-06-17

Post by akos on Soft motion kinematic zones ^{CODESYS Forge talk (Post)}
Hello Everyone, Is there any solution to define safety/forbidden zones in the coordinate system of the kinematics? Its not enough, to define only limits in my servo axes! I need zones in 3D! :) Thanks for the help!
Last updated: 2024-07-10

Post by timvh on Codesys SVN ^{CODESYS Forge talk (Post)}
Minimum version is 3.5 SP19 Patch 3. See https://store.codesys.com/en/codesys-git.html But you could ask your PLC vendor if it is possible to program their PLC's which have Runtime version SP16 with development version 3.5 SP19 or higher (should normally be possible, but with Safety PLC's there could be some regulation limitations).
Last updated: 2024-05-01

Post by timvh on SafetyApp - "Invalid ERR Ack input" ^{CODESYS Forge talk (Post)}
I had a similar error "Invalid ERR Ack input". What you need to do is link an variable from the "non-safe" PLC to the Group IOs of the POU in the Safety app. * Add a POU to the SafetyApp (probably already done, otherwise you don't get this error) * Right click on this POU - select properties * Go to the Group IOs tab * Link a variable to the Err.Ackn. input I don't know about the Size of zero, I didn't get this error. Were you able to fix this?
Last updated: 2023-11-16

Post by e60newbie on EVL/EVC auf IFM CR711S ^{CODESYS Forge talk (Post)}
Hi, jain. wir haben mit IFM gesprochen. Sie sagen es liegt an Codesys selbst. Die Daten seien anscheinend nicht konsistent wenn das Projekt zu und erneut geöffnet wird, sei ein probkem von SP11. IFM wird im Sommer ein neues Package rausgeben wo sie auf eine neue CS Version wechseln, dort soll das Problem dann behoben sein. Wir haben zwar einen Workaround rausgefunden aber jenachdem was du in der Safety treibst geht dieser dann nicht mehr. schreib mir zur not eine PN wenn du mehr wissen willst.
Last updated: 2024-02-28

Post by pjoret on IFM CR711S Can Low Level Library Use ^{CODESYS Forge talk (Post)}
Hello, I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part. I already use it on the Standard part and it works properly. I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ? And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It. Have a nice Day.
Last updated: 2024-04-03

Post by nelsonreis on Help with IFM EcomatController CR710S in Codesys ^{CODESYS Forge talk (Post)}
Hi, Recently I bought a CR710S controller from IFM. I installed Codesys V3.5 SP11 as recommended and all required packages (including the safety packages and the IOWrapper package). However, I can't even open the project template without getting errors related to libraries failing to load (below in the first print screen). Then, clicking ok appears only 2 errors (second print) and when trying to go to simulation and login I get another 2 different errors (third print). I really appreciate any help anyone can provide, I'm completely stuck on this right now.
Last updated: 2024-06-04

Post by steven-schalm on Github Actions CI/CD tasks - development topic ^{CODESYS Forge talk (Post)}
hello kevinrn, I've been looking for a solution to the CI/CD issue for a long time. Briefly about me... I am 32 and software architect for Codesys V3 and fullstack dev for web (VueJS, NestJS) in a small company in Erfurt (Germany). https://www.rex-at.de/. Through my web part, we already have CI/CD running well via GitLab (YAML-based configuration file (.gitlab-ci.yml), which defines which pipelines and jobs are executed when certain events occur) with everything you know. Stages for npm packages - prepare (GitVersion, npm install or whatever) - build (vite, tsc or whatever) - testing (vitest, jest or whatever) - deploy (npm packages) And similar for monorepo's or backend services (in NestJS) as DockerImages. For Codesys we have been building an OOP framework for years (~50 libraries now), which is currently managed via SVN and a specially written Svn-Watcher (in Python) gets commits and runs and builds everything together and deploys it to an FTP server and network drive. Why do we still have SVN? Because we are unfortunately still tied to the safety integration of Codesys and can therefore only go to SP15 at most with our controller/Eckelmann. But soon there will be an update and there will be no more obstacles to using Git. Hence my questions: 1. the basic idea is to run a local Windows Runner on some machine? 2. install Codesys on the machine where the runner is running? 3. powershell & python scripts are then used to execute builds (compile, build, sign libraries) & deploys? 4. can the Github action also be used in GitLab? ChatGPT has already told me that it's not the same, but it doesn't hurt to ask. Do you have any ideas on this? Greetings :D
Last updated: 2024-08-20

Sort by relevance or date